• Configuring a Win2003 share to be available to all XP users on networked machines

    Been a long while since I've worked with Windows, and the networking metaphor is killing me (Unix here...). I have in a server room a Win 2003 server with a large RAID. There are 4 XP machines in 2 offices, all on the same LAN/subnet (2003 server is DHCP server for the XP machines). The network is...

    Smsd15 pointsBadges:
  • W2K Advance Server 2 nics, DHCP and DNS enabled, clients cannot connect to internet, server can

    Hello, I have a W2K Advance Server using a router with the following informatipon provided, the one board NIC is conected to a router which I can connet to the internet, the clients cannot: On board NIC: Connection Specific DNS: swbell.net DCHP Enabled: Yes Autoconfiguration Enabled: Yes IP Address...

    Dlwick30 pointsBadges:
  • Help needed implementing DHCP Relay Agent

    I am very new to networking but I know the basics. Now I am really interested to know how I can implement DHCP relay in C language for one of our client's switch. That is my first project. My strengths include C, Unix and the basics of networking. Can someone point me in the right direction on how...

    NetworkingATE1,545 pointsBadges:
  • DHCP License

    The DHCP ip address is being used by some other computer and it wont release back into the license pool for another computer to use it. How do you get the DHCP ip address for the old computer? How can you reuse it?

    Teche5 pointsBadges:
  • Deny DHCP and Network access to rogue wireless routers

    We are running a MS DHCP network and home wireless routers are finding their way in. I scan the DHCP scopes daily and thought I was denying their ability to connect by creating a reservation for the MAC address and modifying the configuration options for the device. I set the following options to...

    Twhite0 pointsBadges:
  • dhcp

    i ve configured dhcp server on my network, in which there are 200 pc's. all are having their dynamically arranged ip addresses. suppose i m disonnecting one of my pc from the network and again im reconnecting it, am i going to get the same ip address or not. i ve configured the scope also.

    Srikanth0810 pointsBadges:
  • Stop Error (C000021a)

    I am receiving this stop error(C000021a) "windows logon process system process terminated unexpectedly" with win 2000 server. Safe mode and Last Known Good Conf. works fine. Is there any solution without reformating the HDD? I have ERD with me. Will that help me? Any advise on this would be highly...

    BinooDas123410 pointsBadges:
  • two networks two internet conections only want too use one

    my problem is this i have my home network with a windows server 2003 runing DHCP, and providing the whole of my network with internet using two NIC cards, my next door neighbour wants too be able to access the files on my network the problem is he also has the internet and when he is conected to my...

    Wabit5 pointsBadges:
  • Configuring Internet for the DC with DHCP

    ok, im a semi newb when it comes to domain controllers and networks. since we dont have an IT person on staff full time, i have to fill that role. we moved locations and i brought over all the computer equipment (server, switches, etc) and reinstalled them exactly how we had them at the other...

    Joshik65 pointsBadges:
  • Lost Connections

    I am having problems with some machines losing their internet connections. I do a ipconfig release and renew and everything is fine. The odd thing is after a couple of weeks, the problem goes away. Where should I start looking to find the cause of this issue?

    Scl270 pointsBadges:
  • GPO — increasing logon banner size

    how to configure a logon banners that can exceed 512 characters in length in window server 2003?

    Rmcfarla0 pointsBadges:
  • DHCP

    I have a network with one range of IPs (10.122.244.1 to 10.122.244.254), and I am runing out of IP's wich the best way to increase the range with out use the superscope.

    Ama92710 pointsBadges:
  • Cisco Wireless 1200 series access point

    Hello all, does anyone know how to change the DHCP range that a Cisco 1200 series Access point gives out, the IP for the AP is 10.20.x.x, and it give out IP's in the 192.168.x.x range, does anyone know how I can get it to change to the 10.20.x.x range as this is the range that I want the computers...

    CGarcia26C1,025 pointsBadges:
  • Direcway node will be replaced by with an Adtran 3200 router hooked to a T1. Do I simply treat the Adtran 3200 as another node?

    I work for a company that has an Ethernet peer to peer lan. All nodes are MS XP Pro PC's. They presently have a Direcway node that supplies Internet access. The Direcway node will be replaced by with an Adtran 3200 router hooked to a T1. Do I simply treat the Adtran 3200 as another node? Does it...

    NetworkingATE1,545 pointsBadges:
  • Using ip helper-address on a vlan with two subnets

    I am trying to get ip helper-address to be able to pull DHCP addresses from a super scope. Right now it will only pull from the subscope that matches the subnet of the primary subnet for the vlan. Does anyone know of a way around this? Or if there would be an adverse affect on the current DHCP...

    Jfenton5 pointsBadges:
  • DHCP and RAS question

    I have about 20 VPN users who remote into the server. I am having a problem with the DHCP server giving IP addresses to the PDA. The DHCP server is giving them 192.168.11.12, which is the DHCP server itself, and every PDA should have a different IP but they don't. How do I configure the RAS and or...

    Vmchase45 pointsBadges:
  • Can’t ping a network notebook?

    I have a notebook that is using network resources and a IP address from our DHCP server. But I am unable to ping this notebook, no XP firewall or McAfee firewall.

    4410 pointsBadges:
  • Installation and updates

    Howdy folks, Tryin to keep things going around here....need some advice. I have Win2003 servers and Active Directory.....single domain....approx. 100 client computers.....one location. Am upgrading all computers from Office XP to Office 2003. My project: Install Office 2003 and all updates remotely...

    TheVyrys0 pointsBadges:
  • How do I setup DHCP on a 3Com router on a frame relay?

    In our network we have a frame relay LAN, using two 3COM NetbuilderII 227C routers. The head end router runs 9.1 code, the far end runs 9.3 code. They are both SW/NBRO-CF routers as well. How do we go about enabling and getting DHCP to run on them? What commands do I use to get dhcp traffic to...

    Networkmanjohn10 pointsBadges:
  • DHCP Reservation by Mac -Addresses please explain as am trying to know how to access and configure DHCP Scope and settings.

    DHCP Reservation by Mac -Addresses please explain as am trying to know how to access and configure DHCP Scope and settings.

    244205 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following