An above mentioned server was taken out of storage after 3 years. (storage was proper - sealed packaging&moisture absorbers) [strong][/strong]Does not start: 2 of 5 raid disks show "failed", both in RAID BIOS and LED's on the front panel. I tried swapping 2 failed drives with 2 good ones in...
One of the servers I manage is a 4.5TB Poweredge 2800 with a powervault 220s running Windows Server 2003 that no longer will boot and is about 10 months out of warranty. I started having some minor problems last week that I assumed were software related but then I did a reboot of the server after...
Hi, I use a Dell Poweredge SC440 as the server in my office. It runs Win 2003 Server Standard Edition as the OS. Recently, we bought a new server dell poweredge 2800 which we are now using. my problem is this: I wanted to demote the SC440 so it can be used as a workstation, but the active directory...
Pre requisite for installation of Windows 2003 on Dell power Edge 2800
Windows Server 2003 Installation, Dell PowerEdge 2800, OS installation
Using DELL Poweredge 2800 with a Raid 5 configuration of 2 hard drives capacity 85GB Ultra 320 SCSI. Hard disks have been showing failure. I tried to bring the hard drives ONLINE by FORCE option provided in the utility manager to configure RAID and got the hard drives up but couldn't login to...
I have a Dell Poweredge 2800. My situation is that i added 2 hard drives and setup Raid 5 successfully. I installed windows server 2003 and it finds the drives. "a disk read error has occurred" Any help?
I'm working on a Dell PowerEdge-2800 server running on Windows 2000 Server. At present there are 2 partitions C: for system & D: (600GB) for data on a PERC 4e/Di card configured as Raid-5. We are planning to install a PERC-5e card with Dell MD1000 external storage having two virtual disks of 1.8TB...


