• SBS 2003 Premium with POP3 connector failing to send email to internal users who are not members of the domain.

    OK, The scenerio is as follows... A small business with 10 computers; Six PCs running XP SP3 and four Macs. The PCs are using Outlook 2003 to retrieve email and the Macs are using whatever built in client comes with them. All of them are connected to a server running SBS 2003 Premium. They have a...

    Raybo5820 pointsBadges:
  • RAID 5 configuration on Dell PowerEdge 2800 hard disk failure

    Using DELL Poweredge 2800 with a Raid 5 configuration of 2 hard drives capacity 85GB Ultra 320 SCSI. Hard disks have been showing failure. I tried to bring the hard drives ONLINE by FORCE option provided in the utility manager to configure RAID and got the hard drives up but couldn't login to...

    ITKE352,390 pointsBadges:
  • PDF writer to FTP to server or netwprk location

    we run v5r2 and have various PDF writers that e-mail reports to users in another state. Due to SOX compliance we need to now set up a system where these reports are secure (encrypted) unfortunately, Infoprint for V5R2 does not offer encryption only v5r4 or higher. We cannot upgrade our OS at this...

    Lora15 pointsBadges:
  • Power surge on Hub port

    How to update your DT9837 module

    Persistence5 pointsBadges:
  • PowerBuilder to get connected with mainframe

    I have my application in PB 10.5. I have to connect with mainframe. How to get connected with mainframe from PB 10.5?

    1613775 pointsBadges:
  • Network Controller Driver missing, company not known

    Hi, All of a sudden my working network controller's driver went missing. I have dual boot (XP, ME), and it is missing in both OS. Could it be a hardware problem ? Do I need to replace the network card ? I searched for the driver in WinXP installation disc, but didn't find it, though WinXP had...

    Akash2160 pointsBadges:
  • How to update BIOS on Gateway 700x

    I have downloaded the bios update from gateway. When I copy the expanded files to diskette the auto ex and command com file do not show they were copied. I believe the file are there, they aren’t visible however. When I start the computer it displays a message that the diskette is not a system...

    Don095 pointsBadges:
  • How can I automate the signon of a user to a 5250 device at IPL

    I have 2 Intermec 5250 Devices that we use as time clocks. When we bring the system down for maintenance and IPL - I currently have to have someone drive to 2 locations to sign these on in order for the timeclocks to be accessible

    gpdonnaf45 pointsBadges:
  • A computer can only solve all that is solvable, which is indeed a drawback. Can we solve more than a computer?

    If not, are we too a Turing machine?

    Asvr10 pointsBadges:
  • ASCII to EBCDIC and Decryption on mainframe Z/OS

    This is done on a mainfrain Z/OS. The the file is encrypted and ASCII. Step one un-encrypts the file creating a dataset that is 73,994 blocks in size or roughly 2,311 Megabytes. Because we don't know the real record size the ASCII to EBCDIC step is done by specifingy the output record size as 32K....

    Patmac1005 pointsBadges:
  • How can I get an IT job now if I couldn’t in 2005 with my I.S. degree?

    I earned a degree in Computer Information Systems (C.I.S.) in 2004. During my placement year (in 2002) I worked as a software tester at the beginning and then moved into development. After my degree I was engaged with my family business, and at the end of 2005 I moved to the UK (to accompany my...

    NetworkingATE1,545 pointsBadges:
  • IKJEFT01 return codes

    I'm trying to debug an abended job and I'm getting a rc=1000 for IKJEFT01. Anybody have any ideas what this indicates?

    Darbyshaw5 pointsBadges:
  • RAID management with IBM System x3400

    hi iam new here and i have some questions to all of you who is working on RAID. 1. i have x3400 IBM SERVER and it has 2 disk with 74 GB each while installing with server cd the only availabel option raid 1 i selected that and after that i install w2k3 server standard editions now i want to make it...

    159357212325 pointsBadges:
  • Hyper-V VHD file copy

    I just installed the stand-alone version of Hyper-V on an HP DL380, and installed the Hyper-V management console on a Vista workstation. I'm able to create VM's/connect to the Hyper-V just fine. The problem is, can't figure out how to copy a VHD file onto the Hyper-V server. Since Windows Server is...

    BladeMarvel35 pointsBadges:
  • Solaris virtualization techniques

    The following question was recently submitted via e-mail by a user: Solaris users -- is there any preferred method of virtualization for Solaris (zones, etc.)?

    JennyMack4,280 pointsBadges:
  • iSeries Access printing with Lexmark 2381 printer

    Hi We have a client using IBM Power 6 Server with Os/400 V5R4 using Iseries Acces version 6 to control a Lexmark 2381 printer contected to a P.C. The problem we are having is we are trying to print an 8 1/2 " form (51 lines) and the first form prints fine (Continuese forms) but at the end of the...

    Semd041970 pointsBadges:
  • Does more memory will help

    One of the desktop system shows CPU utilization 100%,It has installed with fabric editor application,this application used for transfer designs to weaving machines through network.If i close this application CPU utilization will come down to 1%.IT has installed with 256 MB memory If i add memory...

    ITdump20 pointsBadges:
  • Wake on LAN: No light displays when the computer is in power off state

    In BIOS on the Power Management Setup: I have enabled Resume on PME Enabled. Again, in NIC cards' property in the power management section: I have enabled allow this device to wake the computer and only allow management station to wake the computer. But I even don't know why there in blinking light...

    42445785 pointsBadges:
  • How to transmit a file from UNIX to Mainframe via SFTP ?

    Hi All, I'm working on a small SFTP scripting, where in we connect to an external vendor via SFTP to get a file (File is on UNIX box), and push the file to Mainframes. As per the company norms, we should be using SFTP to get/put any files with external servers. So I'm using SFTP to get the file,...

    LrnWithFn15 pointsBadges:
  • Disk failed in RAID 5 Dell Poweredge 4400 can i create new container

    I have a server Dell Poweredge 4400. Windows 2000 server running a RAID 5 with 4 disks. One of the disks has failed due to a container being deleted. If I create a new container and put the remaining 3 drives in it will I lose the data on them? Any suggestions for a proper recovery/rebuild?

    ITKE352,390 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following