• Which switch in my IP-based CCTV system project will combine camera controls?

    I need some help in selecting devices for an IP-based CCTV system project: We have 3 towers; each consists of 25 floors. A consultant planned to centralize the monitoring of 3 tower cameras in a security room on the ground floor. But before, the NVR was placed in each tower on the 5th floor. I...

    NetworkingATE1,545 pointsBadges:
  • ESX 3.5 Networking on IBM BladeCenter E

    I'm looking for suggestions on the best way to configure failover networking using 4 Cisco IGESM switches in the 4 bays. Currently, I have all 4 ports on each switch configured for GEC, but if a switch fails, there is no failover to one of the other switches. Switch1 is for Service Console, Switch2...

    EFStruttin5 pointsBadges:
  • Recommendation for handling wall phone plates in UTP cable installations

    In order to prevent a potential ground loop effect on F/UTP cable installations I usually avoid letting the metal shell of a shielded connector touch a metallic plate. What does Siemens AG recommend for wall phone plate installations when deploying an F/UTP cabled installation?

    NetworkingATE1,545 pointsBadges:
  • error in connection between oracle8i&developer2000

    I'm installing Oracle8i on Windows 2000 professional on NTFS partition and on the same machine I'm installing Developer 2000 or form6 in a different partition. When I try to connect Developer to Oracle, I get the error "TNS could not resolve." Please provide a solution. Can I use Oracle8i...

    POWERINIT0 pointsBadges:
  • Trouble shooting of WAN/LAN circuits

    I am working on a WAN/LAN circuit that includes core router, core switch, distribution switches, VLAN and access switches and hosts. What are the steps or commands I have to use to shut down or unshut a port on the access switch after telneting and accessing the core router or switch?

    Goforccnp0 pointsBadges:
  • Who is responsible for the Firewall

    Our information Security department is different from the network group. Currently, we have Check Point firewalls running on Nokia boxes (IPSO image). The Network group handles the installation, upgrade, routing and IP address specification etc on the firewalls, while Information Security writes...

    Muneanya0 pointsBadges:
  • Cisco PIX VPN config

    Hi, I'm trying to configure a Cisco PIX 501 firewall to accept inbound VPN client connections and route secured traffic to a subnet behind this PIX. I've managed to configure the PIX to accept the VPN client connections, but I can't get the traffic to route correctly to the subnet that is behind...

    GregNottage0 pointsBadges:
  • router behind a router

    I have a SOHO that I am trying to configure in an extended star, with a WRT54G at one end, and a WRG614 as the gateway/first router. I have configured the 614 to have the address 192.168.1.254 and left the 54G at 192.128.1.1. I set the 54G into Router mode and tried to make a static path to the...

    Nu2dgame0 pointsBadges:
  • Wireless cloud without an Ethernet backbone required

    I?m trying to connect the registration terminals used outside various halls at any given exhibition centre to a completely independent network that my company will set up at whatever site we attend. Most of our work is in the Middle East, so taking the Dubai World Trade Centre as a prime example,...

    UrbanPeasant0 pointsBadges:
  • Looking for clarification on new IP layout

    I currently have a 192.168.1.0/24 network. I have one cisco router with many cisco switches that allow everyone to have a DHCP ip of 192.168.1.X. I will soon have more people then the /24 will handle, so I would like to switch to: 172.16.30.0 subnet 255.255.254.0 mask 172.16.31.255 broadcast That...

    Kevins740 pointsBadges:
  • Intrussion detection

    Does any one know of any goof Intrussion detection system boxes which are not crazy expensive and support up to 1GB lines.

    Dimchik0 pointsBadges:
  • Retired computer accounts in Active Directory

    I need a dependable script!!! After several domain migrations and adding a few new sites over the past two years I have found that there are hundreds of computer accounts in Active Directory. We are a global company so tracking computer names is impossible. Because we use several management...

    Marcola0 pointsBadges:
  • Wireless bridge

    My office runs a normal LAN. The company has recently purchased the building next door, and we want to extend the LAN into this building using a wireless link. To achieve this, we have purchased 2 Netgear WPN802 wireless access points. The Netgear website has a step by step guide to configuring the...

    Nickc197665 pointsBadges:
  • Server 2003 network – 2 NICS

    I have a server 2003 with 2 nics internal 192.168.10.1 255.255.255.0 no gateway 192.168.10.5 DNS external 10.1.10.5 255.255.255.0 10.1.10.1 gateway 68.87.76.178 dns Internal nic handles the DHCP 192.168.10.150-190 it has the scope options with the gateway 10.1.10.1 that is the comcast modem. and...

    Calitech0 pointsBadges:
  • TCP Retransmissions b/c of Checksum Incorrect

    We have a problem where some users will complain of slow application response time (on the LAN) from our ERP server, but others will be fine. After many hours of troublshooting I've discovered the following: - Packet Sniff's of affected users shows TCP Retransmissions because the Checksum is...

    Tbitner510 pointsBadges:
  • Dell laptop NIC problems

    Hi, One of my colleagues has a Dell Latitude D510 running Windows XP. When connected to our LAN, the laptop is unable to obtain an IP address. When I view the network card in Device Manager, it appears to be installed and working correctly. The NIC is a Broadcom 440x 10/100 Integrated Controller. I...

    Nickc197665 pointsBadges:
  • Fine-tuning RHEL Processor, Intel

    How do I fine-tune the processor in Redhat Linux ES4 U2? The processor is Intel Xeon E5430, 2.66 Ghz.

    Chunter110 pointsBadges:
  • AS400 DDS Specifications and Arrays

    We are working toward converting our system from a S/36 to an AS400 S36/E. On the way we are attempting to create DDS specifications for our files and externally define the files to the RPG code. We are prototyping a program to read the RPG II programs and build the DDS specifications from the...

    Kirk4890635 pointsBadges:
  • How do I use Veritas Volume Manager DMP with a StorageTek ST2540 array

    We have recently aquired a Sun StorageTek ST2540 array and directly attached it to Sun T2000 server. While the native Solaris 10 MPxIO is able to recognize duel path to the Storage but Veritas DMP is unable to. Could this be because of array support missing in Veritas Storage Foundation Suit 5 for...

    Ranger2k75 pointsBadges:
  • CPU UTILIZATION IS SHOWING 0 IN SAR REPORT

    Hi all I am facing problem on oracle 10g We have oracle 10g on solaries 5.9 We have database in RAC envinment with 2 nodes We have 10g AS as a front end application. My problem is when user fired user name and passwd the application page are coming very slow it is taking very much time mean while...

    Oracle dba115 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following