• Moving DASD Between LPAR’s

    Folks, Just want to know while moving the disks between LPAR's, Do I have to move the cache card also? CMB08 575C-001 Operational Storage Controller DC04 575C-001 Operational Storage Controller CMB07 575C-001 Operational Storage Controller DC05 575C-001 Operational Storage Controller CMB10 575C-001...

    Mani1017130 pointsBadges:
  • DASD limit

    What is the DASD limit (gigabytes) that can be allocated to an LPAR on a i5 570 Power6 that is running V5R4?

    clinte4715 pointsBadges:
  • Installation time for disk drives

    How much time should be allocated to install a 5095 with one 2780 PCI-X Ultra RAID Disk Controller and 12 - 4327 70.56GB 15k rpm Disk Drives?

    DAB65 pointsBadges:
  • DASD storage levels

    Is there a recommended storage level percentage for optimum performance / cost ? Obviously I realise there are lots of factors to take into consideration, such as projected growth, disk sizes / arms, I/O etc. But with all these catered for should I be looking at something around 75% or say 50%? 50%...

    Guy553435 pointsBadges:
  • How to find a large size object or fast growing object ?

    Few days back we had an issue where DASD went up to 97% and even higher... Due to a user who have created a large file: Library . . . . . . : ABC Object Type Attribute Text XYZ *FILE ********** "Object with size has grown extremely High" We took a service dump and the system IPLed. Could nay one...

    SUBHRO40035 pointsBadges:
  • mystery space used on production box

    we've saved our production box, and restore it to a Disaster Recover box. the amount of DASD used is about 450Gig less than our prod box. everything seems to have restored (files, programs, logicals, ifs files, etc). restore sys and non-sys... can't figure out what the extra 400gig is on our prod...

    dpa155 pointsBadges:
  • DASD Utilization

    Is there a simple way to identify which libraries are taking up the most space? Also those with the most deleted records etc. And those which have not been used for many months. I want to chase down my apps teams and prove to them they need to do house keeping and not just keep asking for more...

    Guy553435 pointsBadges:
  • iSeries : Current Un Protected Usage.

    Hello I see now a days my Current Unprotected Usage is keep touching the threshold value and coming back after some time. I'm not sure which job/jobs are causing the job in doing hike? Is there any way that we can track this?

    qmaster1,675 pointsBadges:
  • How to connect more than one DASD to IBM mainframe

    how to connect more than one dasd to ibm mainframe?

    Ytyt5 pointsBadges:
  • ASP Increased over night; how do I get it back to a normal level?

    we have noticed that our 570 box took a ASP hit from 62 % to 81% over a day.I am getting inputs from development staff what was happened ontheir side. Apart from that ,I want to investigate it from administration side what are the new objects saved during that period.but, i'm not sure how to do...

    qmaster1,675 pointsBadges:
  • dasd vs asp?

    is the relation between DASD and ASP?

    0 pointsBadges:
  • Require the method and steps to decrease ASP and DASD utilization.

    Hi, I am new to AS400 Admin. And one of the AS400 box has high ASP utilization. The Disk space report shows the user libraries and user directories occupy maximum space. Can anyone please elaborate the steps I need to perform inorder to reduce the ASP utilization of the system.Specifically for...

    Meetmeonline210 pointsBadges:
  • Adding/Increasing Space on Wintel Server

    How does the installation of space on a Wintel server compare with the installation of DASD storage on a mainframe processor

    TheRoad5 pointsBadges:
  • CPU overhead on DASD quota products

    We are considering use of one the OEM products that allows real-time tracking of DASD dataset usage and setting quotas on usage with optional prevention of allocations over budget. I have unsuccessfully tried to find anything information on what processor overhead these products carry. Example...

    PeteW100 pointsBadges:
  • Storage Formulas

    Are there any formulas that can be used in Storage Management for the following areas: - identify how many records are in a dataset? - how must space will a dataset need Primary allocation? - How many tracks will a tape dataset require if copied to DASD

    Zaszz10 pointsBadges:
  • Redirecting CA-View Output to DASD

    How do you get the output from CA-View into a DASD dataset?

    Tketcher5 pointsBadges:
  • how to replace dasd on as400 system 9406 model 300

    need information on how to replace failed hard disk (dasd). used sst to determine that disk # 8 has failed. I can't find ANY information on how to get this done. I do have a manual on the 9404 and wonder if the process is the same?? Can someone help me please. Thanks.

    Jeffi5 pointsBadges:
  • How do I determine the price ranges for an iSeries?

    I am interested in understanding how much an iSeries costs (mid-range and enterprise level systems) and its associated hardware components such as DASD, memory, etc.. I have been browsing the internet, but I have not come across a site that clearly lists the price for a specific iSeries model or...

    Vintagej5 pointsBadges:
  • Sysplex Split

    Does anyone have experience with splitting a sysplex with isolated dasd and tape on each new plex? How do you move tape data between the new plexes efficiently? The only methods we are aware of are very awkward at best, e.g. copy tape to dasd, ftp dasd file to other plex, copy back to tape. I know...

    Jefhorn5 pointsBadges:
  • RGZPFM vs Reusing Deleted Records

    Does anyone have an opinion on using one over the other? I am familiar with RGZPFM and it's benefits but am not familiar with the PF option of reusing deleted records...I would think it would be better to reorganize the file rather than reusing deleted records becuase you could have a lot of...

    LSwanKayla20 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following