• Client Access file transfer TO AS/400

    Hi Gang, I have and end user who indicates nothing has changed...famous last words. A file transfer was set up by a former IT person on the endusers PC That transfered a TXT file from her PC to the aAS400 but now when she tries to transfer the data to the iseries....she is getting CWBTF0023(???) I...

    Rmason335 pointsBadges:
  • EIM/SSO on System i with Password *None

    I have just configured EIM and SSO for Client Access in a proof of concept on my Development System i and initial testing is successful. However part of SSO requires setting the user password to *None. If all users are set to *None how can users use their non SSO mapped drives in Netserver? The...

    Alison88380 pointsBadges:
  • What parameters to use in AS/400 file transfer

    with VB I am trying to create a .FDF file to be used for clientaccess file transfer to as/400. Would like to know what the parameter settings mean, which one I have to use.

    Overlies15 pointsBadges:
  • PC to AS/400

    Here are some points TOM and thank you. I will be using Client Access. My AS/400 on one side and PC beside it. I want my PC to work as console. I have my internet modem or HUB also here. What is the quick way to connect it. Do I need IP addresses also.  

    khan23275 pointsBadges:
  • Controlling Client Access screen colours

    Contrary to popular wisdom, its possible, and pleasant, to set your client Access screen colours to be, say Black on a white background - or to have a session with a red background when accessing a produciton box, and (blue's my favourite) a different colour for a development box. The colour...

    Yorkshireman5,520 pointsBadges:
  • Client Access: IP or DNS?

    Can I tell by looking on the system if my users are accessing the box via IP or DNS or do I have to vist each PC to check config?

    Guy553435 pointsBadges:
  • some old emails are going out of my server

    hi my exchange dat base size is 102 gb approx and when i mount the mailbox the some old mails get sent to the client ?can you pls assist me

    Ajinkyaa8615 pointsBadges:
  • Problem with AS/400 data transfer to Excel

    I have been downloading AS400 query files to Excel spreadsheets for many years using the Data Transfer utility in Client Access. There has never been any problem. Now suddenly all of the output data has started transferring to Excel as long hexadecimal strings and is unusable. I asked the IT folks...

    JDK55 pointsBadges:
  • System i Access Windows 7 V6R1 install error 1713

    I'm installing System i Access for Windows V6 R1 M0 on a Windows 7 machine and I'm getting the "Error 1713...cannot install one of its required products" error.  I've tried deleting the installed objects, cleaning the registry, rebooting and installing.  No Luck. This is the first problem in...

    Marz355 pointsBadges:
  • Client Access – Remember Password

    Hi , I am using Client Access for downloading data frm AS400 to PC , I have changed the settings where the download starts automatically , however I always have to enter the password everytime as it prompts the same. Please suggest how can client access remember the password.   Thanks

    Atti123130 pointsBadges:
  • Adding client to domain in Windows server 2003 standard edition

    please, how do i add client computers  to a domain in server 2003 standard edition

    Lopetolu20 pointsBadges:
  • VPN client access GRE tunnel

    i have two cellular modems that have a gre tunnel between them. i have vpn client connections to each modem to access each lan however i would like to be able to access remote lan (via gre tunnel?). is this possible?

    Jmf555 pointsBadges:
  • Client Access printer setup

    I replaced the parallel cable to my Epson FX-880 printer with a D-Link 311P print server, and ever since then my Client Access printer sessions start with "Windows Default Printer" even though the .ws file specifies the Epson printer.  I never had this problem until I installed the DP-311P. I am...

    LBurkett99830 pointsBadges:
  • How to determine what type of RAM in inside a remote computer

    Hi All, Is there a free application that can give me the following information about any remote client I remote into to 1. type of ram and speed 2. processor 3. type of video card Any help is much appreciated Regards Shane

    shanekearney810 pointsBadges:
  • Client Access Session B will not minimize

    Client access V5R4, all sessions will minimize and reduce in size, accept session B. Session B will minimize to the tray but am not able to reduce in size..

    Clickster30 pointsBadges:
  • data transfer to excel via client access

    with client access Version 5.00, I would like to upload a file to excel 2007 by using data transfer command

    Annieguibert5 pointsBadges:
  • iSeries client access Copy to clipboard fails

    Hi, I have an intermittent problem with copy and past from client access for system i. I can be happily using copy and paste from client access to word, or excell , then for some reason it just quits, and all I get is a beep. To reinstate, I have to exit all the way out and kill the session, and...

    Asmithsbs15 pointsBadges:
  • Client access error PCSWS037

    When I installed Client access V6R1 on Windows 7, laptop HP Probook 6550b, getting following errors PC5250 - PCSKBD110 the system keyboard type=8, subtype=0, is not supported... and error PCSWS037 Intialization of the keyboard table failed

    Versa5 pointsBadges:
  • CWBLM0011 Error on V6R1

    Hi,  We currently have 2 pc's connected to a remote IBM AS400 via Client  Access V6R1. Recently one of the pc's started giving the error "CWBLM0011 - An internal license error has occurred, rc=6211". This happens with any user on that pc.  I have read various forums including multiple...

    As400novice165 pointsBadges:
  • Client Asking for Password in domain environment

    I m workin in a domain environment, i have added the client to domain. everything is workin but when i try to access other network systems, it asks for the password. i think it should not ask for the password coz its already added to a domain.even when i access the server , it ask for password. i...

    Changeme5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following