User profile disabled
Hi again, first off, thanks for your help in my other quests. New problem - Subsystem QSYSWRK disabled user profile USER on device *N. This happens constantly for just this one user. I have changed the PWDEXPITV to *NOMAX but it still happens. I don’t know if this is is because of the new version [...]

Answer Question   |  May 3, 2013  6:09 AM
AS/400, Client Access

Client Access
I cannot get a signon screen thru Client Access…… Current setup…… TCP/IP iSeries is 192.168.1.2 Router address is 66.102.238.245 Router gateway is 66.102.238.246 Primary DNS 74.40.74.41 Secondary DNS 74.40.74.40 (Actually these are different from actual but stated for example purposes) To configure Router and set up port forwarding is 192.168.1.1 In a DOS prompt I [...]

Answer Question   |  April 5, 2013  9:23 PM
Client Access, Client Access 5.4

Client Access, wide display
How do set AS/400 Client Access to display 128 positions on the screen? I have seen it before but I can’t find the setting.

Answer Question   |  March 5, 2013  7:17 PM
AS/400, Client Access

Panasonic CF-H2 Toughbook
I am running Client Access Ver5.5 on a Panasonic CF-H2 Toughbook. When I initiate the built-in scanner on the Toughbook to scan a barcode, the device beeps signifying a good scan, but the Client Access session is not displaying the data. If I initiate the scan on a barcode in note pad, it displays the [...]

Answer Question   |  January 30, 2013  9:17 PM
AS/400 Client Access, Client Access

Unattended install of Client Access
Can you do a unattended install of Client Access?

Answer Question   |  January 24, 2013  4:08 PM
Client Access, Client Access Installation

convert DTF and DTT scripts to RTO
Can anyone, and I cannot stress this enough, Can anyone tell me why I cannot convert Client Access file transfer to replicate in Rumba? in our legacy system we have numerous, but I find it painstakenly (sorry no spell check) difficult to just convert one to work the same way, and when starting from scratch [...]

Answer Question   |  November 30, 2012  7:08 PM
Client Access, RUMBA Software

Field color in Display File – Device type 5251 vs 3477
It started when I noticed that sometimes my displays didn’t show the color that I specified for some fields in the screen. Client Access is the interface between Windows and the iSeries. After investigating many usual suspects, I found the culprit in the assignation of device type to my interactive session. All the interactive sessions [...]

Answer Question   |  November 19, 2012  1:05 PM
Client Access, iSeries

IBMi iAccess (client access) ‘Run The Same’
Hello, What is the purpose of the iSeries Access for Windows’ RUN THE SAME? It is found on the FILE drop down menu in iSeries Access for Windows. I have a user who opens session 1 by clicking as normal on the desktop icon. Then uses File-Run The Same to open session 2. Continuing to [...]

Answer Question   |  October 5, 2012  5:38 PM
Client Access, IBMi, iSeries, iSeries Access for Windows, run the same

Client Access Download w/ Chinese
We are trying to download a file through Client Access that has Simplified Chinese in fields that are defined as Open and CCSID 65535. The Chinese characters are coming through as ‘garbage’. Is there some setting(s) in the download that can be changed to accomplish this?

Answer Question   |  September 25, 2012  3:15 PM
Client Access, iSeries AS/400

Internet file sharing
i want upload more than 100mb data to client access purpose so that how i can upload this data on internet .i donot want go to upload in ftp server.give me best solution. G. Arumugam

Answer Question   |  May 28, 2012  4:32 AM
Client Access, FTP Server

installing client access on windows 7.01 32 bit
We have 1 pc running windows 7.01 and are having issues with the user getting more than 1 sign on screen

Answer Question   |  May 10, 2012  1:55 PM
Client Access, Windows 7

some old emails are going out of my server
hi my exchange dat base size is 102 gb approx and when i mount the mailbox the some old mails get sent to the client ?can you pls assist me

Answer Question   |  March 17, 2012  7:10 AM
Client Access, Microsoft Exchange

Client Access: IP or DNS?
Can I tell by looking on the system if my users are accessing the box via IP or DNS or do I have to vist each PC to check config?

Answer Question   |  March 21, 2012  9:58 AM
Client Access, iseries v5r4, Power6

installing client access version V5R2M0 on windows 7 64 bit
Hi I was able to install V5R2M0 client access on windows 7 32 bit version but when I am trying to install it on 64 bit version then I am getting the error that XCOPYFILE-2 error. Could anyone please help me resolving out this error.   Thanks Vivek Sharma

Answer Question   |  June 18, 2012  5:28 PM
Client Access, Client Access Installation, V5R2, Windows 7 64-bit

PC to AS/400
Here are some points TOM and thank you. I will be using Client Access. My AS/400 on one side and PC beside it. I want my PC to work as console. I have my internet modem or HUB also here. What is the quick way to connect it. Do I need IP addresses also.  

Answer Question   |  March 31, 2012  11:18 PM
AS/400 Client Access, AS/400 connectivity, Client Access

What parameters to use in AS/400 file transfer
with VB I am trying to create a .FDF file to be used for clientaccess file transfer to as/400. Would like to know what the parameter settings mean, which one I have to use.

Answer Question   |  March 31, 2012  9:30 AM
AS/400 File Transfer, Client Access, V5R4, Visual Basic

EIM/SSO on System i with Password *None
I have just configured EIM and SSO for Client Access in a proof of concept on my Development System i and initial testing is successful. However part of SSO requires setting the user password to *None. If all users are set to *None how can users use their non SSO mapped drives in Netserver? The [...]

Answer Question   |  March 31, 2012  8:02 PM
Client Access, EIM, NetServer, SSO

Client Access – Remember Password
Hi , I am using Client Access for downloading data frm AS400 to PC , I have changed the settings where the download starts automatically , however I always have to enter the password everytime as it prompts the same. Please suggest how can client access remember the password.   Thanks

Answer Question   |  June 30, 2011  10:44 AM
AS/400, AS/400 Client Access, AS/400 data transfer, Client Access

Problem with AS/400 data transfer to Excel
I have been downloading AS400 query files to Excel spreadsheets for many years using the Data Transfer utility in Client Access. There has never been any problem. Now suddenly all of the output data has started transferring to Excel as long hexadecimal strings and is unusable. I asked the IT folks if anything had changed [...]

Answer Question   |  September 13, 2011  11:22 PM
AS/400 Data File, AS/400 data transfer, AS400 Hex Invalid data, Client Access, excel, Exporting AS/400 to Excel

iSeries Navigator
I just installed Client Access 5.2 on a Win XP PC (I am successfully tunning this level on other PCs with the same OS) and whenever I try to print in Navigator, CWBUNNAV.EXE “encounters a problem” and brings down Navigator. I need help.

Answer Question   |  May 26, 2011  3:35 PM
Client Access, iNavigator, iSeries, iSeries Navigator, Windows XP