• Mac address to IP address resolution

    How can we resolve IP address from Mac address and can we do this from Cisco switch 3750? We are able to track port no and associated Mac address from Cisco switch by using the command #sh mac-address-table dyanamic>, but we also want to track the associated IP address with port no. Please...

    Ruchitgarhwal0 pointsBadges:
  • Do you think Cisco’s new software business strategy will work?

    During a recent meeting with the media, Cisco executives said they are looking to double their software business over the next five years through acquisitions and emerging technology (especially software-defined networking). Do you think this new strategy will work for Cisco? Could it backfire on...

    Michael Tidmarsh40,255 pointsBadges:
  • Merge two ASA 5510’s into one

    We currently have two ASA 5510's in our environment. One is serving up the VPN endpoint and the other one is the VPN ACL. I needs some assistance in how to merge the two devices together.

    wolfdog5 pointsBadges:
  • Any details to assist me for finding an LMS GURU?

    Does anybody consider themselves an LMS GURU? That maybe can assist me with some key words that I am possibly missing. I am inquiring because I am having the most difficult time matching a candidate for a job opening titled "LMS Network Eng/Dedicated Tech. SCOPE OF WORK: Analyze the NYARNG(NY...

    RIGHTECH5 pointsBadges:
  • Wireless-N Internet home camera

    I have the wvc80N camera that works with the Linksys software by Cisco. When taking motion video clips - triggered by motion detection - the video clips are e-mail to me okay. However - the videos clips themselves are not recorded on my computer. I run Windows 7. Any clues?

    Jorgeee15 pointsBadges:
  • RIP, OSPF and EIGRP in same network

    If I have 3 routers connected to gather and every router connect to it one PC I use for first one rip and for second one ospf and for last one eigrp. Its not ping from PC on first netwoke to PC in second or last network why and it ping from router one to second one?

    omar895 pointsBadges:
  • Cisco AP

    Can we extend connectivity of LWAP in outdoor area by connecting its fast Ethernet port (BVI) to a switch. We have Cisco 1242 Series Access Points.

    Ekansh400 pointsBadges:
  • Voice and Data Network Setup

    I have two ISP's. One strictly for Voice data and the other is strictly for Data.  I have about 40 users with 40 7961G Cisco IP Phones.  I have one Cisco 48 port POE switch, and I have two Gateways (one for each ISP). How do I setup a network that will: 1. have all the voice traffic go over the...

    Arshad1605 pointsBadges:
  • CCM on 2600xm ?

    I have a 2611xm and a 2620xm and 2 - 7942 IP Phones - Can I install Cisco Call Manager and make one ring the other? How? Which IOS do I need and can you set me in the right direction? I have never installed CCM before... Thanks in advance.

    CCMNewbie5 pointsBadges:
  • Configuring CISCO 1841

    Hi, I have Cisco Router 1841 set up with this connection: PC1 --> Router 1841 --> NTU --> ISDN Network --> NTU --> Router 1841 --> PC2. I already configured the IP address in the router and want to know how to configure ISDN protocol in the router in order to get full ISDN network...

    gangnam5 pointsBadges:
  • Design the logical lan topology

    given an IP 201.165.201.0 design an IP adressing scheme that satisfies the following requirements; Subnet A, Subnet B

    theciscostudent10 pointsBadges:
  • Associates and Cisco

    I am pursuing my associates in networking in college. When I'm done, I will prepare for the Cisco certification (CCNA). Am I going to be able to get an entry level job, even though I don't have any experience? By the way, what's the entry level salary?

    Peruvian5 pointsBadges:
  • Wireless LAN Logical design

    • Three main groups: Sales, Production and Engineering. Each group has 60 users in each group. • The standard network card is a Cisco Aironet 350, and the access point selected is a Cisco Aironet 1200. • The Sales and Production departments should not be able to access the Web server on any...

    Jonigooner115 pointsBadges:
  • Cisco 2811 – 3 VLAN

    I have a Cisco 2811 Router with 3VLANs. I reset the router from scratch and want to set up my EtherSwitch with 16 ports to have 3 VLANS. Ports 1-10 to be VLAN1, 11-14 to be VLAN2, and 14-16 to be VLAN3. The Gig port will be for my hardware firewall that then goes to my modem. So: Modem -> HW...

    SomEntity5 pointsBadges:
  • How do I setup an automated VPN connection?

    Our branch office uses Cisco VPN to connect to our corporate office - and our corporate office uses Check Point VPN to connect to our branch office. Can I have an automated VPN connection while being at either location? Thanks.

    NetworkingATE1,545 pointsBadges:
  • cisco 2811 with 2 fast ethernet ports and 4 vlans-2

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:
  • Cisco SMB RV180W firmware

    Does anyone know where to get the RV180/RV180W - 1.0.1.9 release? We are running the stock firmware and need the port forwarding fix but I can only seem to find the datasheet.

    Dee1011,035 pointsBadges:
  • I want to upgrade my IOS Router 7507. but min flash IOS new version require 32 M.

    A question submitted on SearchNetworking.com I'm want Upgrade IOS Router 7507. but min flash IOS new version require 32 M. cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory. 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 16384K bytes of Flash internal SIMM (Sector...

    ITKE366,175 pointsBadges:
  • Cisco W1C card and Bad Frame and CRC errors

    I have a Cisco W1C card going to a Verso Netperformer Serial WAN Port..V.35, running Frame Relay protocol. On the Netperformer I see Bad Frame errors with CRC's and Aborts. I alrady changeed the card , it is a dual serial card in a 9360. Could the W1C card be faulty? The cisco doesn't show...

    Billbass0 pointsBadges:
  • access cisco switch 3560

    I have catalyst 3560 i need to configure it ....what is the possible ways to get access to the switch ? with the steps.

    Smsa780 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following