• cisco 2811 with 2 fast ethernet ports and 4 vlans-2

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:
  • Cisco SMB RV180W firmware

    Does anyone know where to get the RV180/RV180W - 1.0.1.9 release? We are running the stock firmware and need the port forwarding fix but I can only seem to find the datasheet.

    Dee1011,035 pointsBadges:
  • I want to upgrade my IOS Router 7507. but min flash IOS new version require 32 M.

    A question submitted on SearchNetworking.com I'm want Upgrade IOS Router 7507. but min flash IOS new version require 32 M. cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory. 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 16384K bytes of Flash internal SIMM (Sector...

    ITKE346,250 pointsBadges:
  • Cisco W1C card and Bad Frame and CRC errors

    I have a Cisco W1C card going to a Verso Netperformer Serial WAN Port..V.35, running Frame Relay protocol. On the Netperformer I see Bad Frame errors with CRC's and Aborts. I alrady changeed the card , it is a dual serial card in a 9360. Could the W1C card be faulty? The cisco doesn't show...

    Billbass0 pointsBadges:
  • access cisco switch 3560

    I have catalyst 3560 i need to configure it ....what is the possible ways to get access to the switch ? with the steps.

    Smsa780 pointsBadges:
  • Cisco 3745 and amd_flash_cmd errors

    I have recieved about 30 Cisco 3745 Routers. I have loaded the 12.3.8.5T Enterprise Plus BIN image on them. Most of them work, but there are a few where the engine boards are bad and some where they work but I am getting amd_flash_cmd errors. I have swapped out the flash memeory and NVRAM. In...

    Eyereadyouremail0 pointsBadges:
  • Who is your current WAN Op vendor? (Sponsored)

    If you're using WAN optimization, which vendor are you using? Silver Peak, Riverbed, Cisco, or another company?

    SilverPeakExpert25 pointsBadges:
  • Cisco Call Manager CSS

    Hi, I'm a beginner with Call Manager 7 and need some help. this is a Hotel in Spain. The Director wants to block all the rooms extensions. when the reception makes the customer check in, I have to change the CSS (calling search space) on the Directory number. CSS Block to CSS Allow. So they can...

    Absolutt5 pointsBadges:
  • Without reboot the server how to scan new LUN from HP24K storage

    After  assign the new lun from HP24k to RHEK5.4 ver server. after reboot only it is showing in fdisk -l  commd output. is it any tool is available or any command except partprobe.  Siraaj

  • Is an MCSE or a CCNP degree more valuable to an employer?

    With the economy the way it is, is it better to have a CCNP (Cisco Certified Network Professional) or MCSE (Microsoft Certified Systems Engineer) certificate? I don't have time to complete both courses and I'm urgently seeking employment.

    NetworkingATE1,545 pointsBadges:
  • Cisco Callmanager 3.3 Reporting Question

    I'm trying to automate a report that I can manually run in Callmanager in the CDR Analysis & reporting tool. I'd like to automate the QoS Detail report to run weekly or monthly and email itself to a specific person. I'm OK with a 3rd party tool running the report on my windows 2000 server if...

    Robbzilla5 pointsBadges:
  • How to implement a secondry DR site with HSRP

    My client wants to implement a secondry DR site using only with Cisco gear. Can anyone suggest best possible solutions or guide me to get the best possible books on this subject. many thanks in advance

    Ajujose10 pointsBadges:
  • Cisco 7965 and remote SIP server not working

    Hey guys, I have this very weird problem and I just can't fix it.. any ideas would be very appreciated! I have a Cisco 7965 ip phone here on my desk. I have a tftp + sip server running in a datacenter and it seems the phone fetches all the data from the tftp, but can't connect to the SIP server....

    Chrisss15 pointsBadges:
  • Command authorization failed.

    I am remoting into my switch fine.  perform the commend "show run" I receive "Command authorization failed."  any thoughts.

    Vember125 pointsBadges:
  • configure-cisco-2811-for-ethernet-p2p

    Hello, I have to configure a Cisco 2811 router that have 2 Fast Ethernet interface, in order to have a p2p connection with my ISP. The FastEthernt /0 will be used for the p2p connection with the ISP, the FastEthernet /1 will be used to route my pubblic IP. In order to make the connection the ISP...

    Rocconeri5 pointsBadges:
  • avaya and cisco compatibility

    we have one location on our campus that has cisco voip we also have a enterpize wide avaya voip we want to convert the cisco voip to avaya but the users in that lacal do not want to give up their cisco phones IP phones are 7941 and 7961 can they be used with our avaya voip system.

    Usmavoip5 pointsBadges:
  • Porting command from Nortel to Cisco

    help    i want to transfer this command from nortel to cisco switch but i dont understand what does it mean if any help me cause i need this urgent        filter acl 111 ace 64 action permit precedence 64[Br type="_moz" /> filter acl 111 ace 64 ip dst-ip 10.86.36.215 eq 0.0.0.0 ipfragment...

    Hatemduck10 pointsBadges:
  • Cisco Linksys E1200

    Whats the user name and password for setting up your wireless router for the first time?  

    Talitha10 pointsBadges:
  • cisco Call manager

    Help I am new to Cisco Call manager and we seem to be having problems with call flows. when people call in they get a auto attendant hit 0 and go to a operator well here is the problem they hit 0 the operator is busy and they go back to the autoattendant, where do I change this. second question...

    Richl010 pointsBadges:
  • Cisco 1841,SDM will not connect nor install

    I am trying to install a VPN Server on my Cisco 1841 router. When I try to connect SDM it will not connect. I tried reinstalling the SDM on the router, but it comes to a stage & says "copy operation failed". I tried to install VPN through CLI, but the CLI doesn't recognize the CRYPTO command. Need...

    Aslamalikhan25 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following