• Cisco router Load Balanceing

    I have 1 cisco 2811 router with 4 T-1 v2 wics 2 of these wics are used for private lines. The other 2 wics I am using for t-1's to the internet, currently only one is in use we just purchased an addtional T-1 from a different ISP with another set of publc IP's I would like to load balance these...

    Zolar250 pointsBadges:
  • Consolidated Security Product/Approach? What about layered approach?

    Hi Punnet, I'm a It Director at lasrge Media firm in NY. Looking at the security overhaul in the recent months and business looking to cxonsolidate the offices enviornment the talk of the town is to have ALL IN One device which does Firewall,IDS,VPN etc. I thought layerd security approach was the...

    Networksecure10 pointsBadges:
  • router#tftp error

    hi all i have a cisco 1721 router connected through consol to my pc.i downloaded solarwind tftp server.when i try copy flash tftp;it gives error %Error opening tftp://10.14.11.24/c1700-y-mz.123-1a.bin (Timed out).tftp server is running but not shown in task manager. any help thanks...

    Redrose0 pointsBadges:
  • cannot ping from router

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1721 router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i cannot.when i...

    Xevier0 pointsBadges:
  • I WANT TO MAKE A WAN. PLEASE HELP ANYBODY.

    ahm i just wana ask, what are the things i should consider, what are the things i must have and and wat are the steps i should do in order for me to create a WAN. please help. thanks

    Guledew180 pointsBadges:
  • cannot ping from router-2

    hi all i am in an ISP.I have a cisco 3600 router and Keymile LECAR modem pair(V.35/G.703)at my end and cisco 1700 series router and keymile LECAR modem pair at the customer end.From my end when i see from router i found the line is up but when i try pinging the router at the client end i...

    Xevier0 pointsBadges:
  • PIX VPN DHCP Relay not relaying DHCP packets

    Hi, I've setup a VPN across 2 PIX506e's using primarily the PDM software. IT is a very basic setup using PDM. I also needed DHCP relay to relay from clients on pix B to pixA and then the dhcp server. So I add in the DHCP relay server address on pixB and point to the relevant IP over the outside...

    Rgoulding0 pointsBadges:
  • Memory Allocation

    Hi Guys, I?m in a sticky situation here. I have a 3640 which hangs for a couple of minutes every night when there?s a scheduled backup going on the LAN(For a couple of minutes all my WAN links start bouncing) . Basically the traffic goes from one Ethernet to the other. When i initiate the ?sh...

    Tintin7770 pointsBadges:
  • Configuring Multiple Internet Access Points

    We currently have a hub and spoke topology where all nine remote sites come back to HQ for Internet and server access. We have one site that uses about 60% of out Internet bandwidth, so we decided to drop a dedicated T1 Internet line at this site for this site's use only - all other sites will...

    Pooled0 pointsBadges:
  • Backup of Router & Pix IOS

    How can we protect our router & pix firewall & how can we recover the ios when ios is totaly corrupted. how can we take backup of ios through tftp server. Please guide step by step as i am new to router & pix firewall. can u provide me website link from where i get the exact information.

    Psharma11760 pointsBadges:
  • Cannot send files without a continous ping running.

    Imaging 2 sites, one having 2 workstations running windows NT and Linux. The other site runs windows NT. The 2 workstation location and the one workstation are connected via Bellsouth NMLI. The 2 station location need to send image files to the single site location. The linux system can do it all...

    Alan320 pointsBadges:
  • Cisco PIX VPN Bridging – Am I missing something??

    Hi, I'm tryin to set up a VPN between two internal sites on the same subnet. I have 2 PIX 506E's linked together (physically) in my test lab (on outside interfaces). All the configuration examples I've seen of setting up a VPN is between 2 different logical networks. However, I want them to act as...

    Rgoulding0 pointsBadges:
  • Cisco VPN Client error message

    I have a Cisco VPN client attempting to establish a connection and receives the following message: "Secure VPN Connection terminated locally by the client Reason: The remote peer is no longer responding." The clients connection properties are identical to those of a successful conncetion made on...

    Jwk1150 pointsBadges:
  • cisco vpn client outbound through PIX

    Hi we havae a client in our company who needs to access his works VPN through our firewall. He is using the latest cisco vpn client. The client software was configured by somebody else,not by myself. I have opened the ports specified by the other person (tcp 10000) on our PIX firewall - but our...

    Andy119830 pointsBadges:
  • PIX – Allow UDP replies in.

    Hi All, The president of my company has started to use skype (www.skype.com). There is a function in the program to do file transfers. When we try that the program show that it has to relay the transfer and when it does that it limits the bandwith to 0.5kB/second. I've pasted the documentation that...

    Dansken0 pointsBadges:
  • routing between VLANS

    Hi, im new to routing and was wondering if somebody can help me please. We have 2 vlans (A and B) VLAN A has an ip address of 192.x.6.x and VLAN B 192.x.10.x.(VLAN B has external ip of 195.x.x.x) There is a server on VLAN B - that i need to be made available to VLAN A. We have a cisco 2500 router....

    Andy119830 pointsBadges:
  • VLAN based on MAC address

    Has anyone created a VLAN based on MAC address using Cisco switches? What I am trying to accomplish is to have mobile video conference equipment placed into a special VLAN no matter what port it's connected to. I have read some about dynamic VLAN's and VMSP. I do not want to have a switch running...

    Absolom0 pointsBadges:
  • Access control lists

    I am a bit confused about writing access control lists, for example how do you write an access list so that only the even number of IP addresses are allowed in and another one to allow the odd number of IP addresses. Also how does one one split an ip subnet address in half, allowing top half full...

    Navinpan0 pointsBadges:
  • inbound remote desktop access via cisco PIX

    Hi, heers my problem, i have a cisco pix firewall and i need to enable remote desktop in bound. thing is ive creatad a static nat 195 .x.x.x f(or the oustide) and 192.x.x.x (inside)., and its visable because i can ping it from an external machine-so i know thats working. ive also permitted traffiic...

    Andy119830 pointsBadges:
  • SPAN port on Cisco 4000 switch

    I am in the process of setting up Websense (internet access filtering) with my Pix firewall. One of the step in the Websense setup is to set up a SPAN port on my core switch, so that Websense can monitor all traffic. I have not set up a SPAN port in the past and I am looking for some guidance. The...

    Hinesjrh0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following