• Accessing Internet through two ISPs

    We have a 512 kbps link Internet connection from an ISP say ISP1. We are connected to the Internet through a DLINK DI-804HV router and a DLINK DFL-300 Firewall. Now we want to enhance our speed from 512 kbps to 1 Mbps. But instead of enhancing the same link, we are planning to get another 512 kbps...

    Ams7535 pointsBadges:
  • NAT on a Cisco 3524XL layer 2 switch

    Is it possible to use NAT on a Cisco 3524 switch? If so is it possible to see a sample template? Thanks Steve

    Devnul0 pointsBadges:
  • Wake-On-LAN / Cisco Mac address-tables

    Recently I scheduled my computers to power on using Wake-On-LAN. There seems to be an issue with some of the computers not turning on. All the computers have identical hardware and have the same BIOS settings. I did some investigation and I noticed that the computers that were not turning on did...

    Skepticals0 pointsBadges:
  • Routing Between Subnets and between networks

    1.I have two separe networks 192.168.0.0 and 192.168.1.0 ,they r physicall connected. What should i configure and where to configure so that host of each network can connect to other host in other network. 2.I have two separe Subnets(after subnetting a class B network),they r physicall connected....

    Chinmoymohanty0 pointsBadges:
  • Networking DHCP growth

    Okay, probably a simple question for a lot, but my experience has been more along the lines of many offices, with a typical setup of a border router (cisco, firewall (watchguard, new cisco ASA's, Windows 2003 server DC, exchange server, etc....) I have been doing this a while now and have been...

    Kevins740 pointsBadges:
  • Cisco Load sharing with port forwarding different ISP’s

    I have a 1811 series router now its set with dual internet connections two different ISP's I have 2 default routes basically It should load balance between two now my concern is I need a port forwarding as we use privite space addressing. I am including current config addresses have been changed to...

    Dimchik0 pointsBadges:
  • Cisco 3640 config issue

    I'm migrating from a 2620 to a 3640 carrying 2 multilinked T-1 circuits and a single Ethernet interface. The 2620 is running IOS 12.2 and 12.4 is on the 3640. I have ported over the configuration almost identically, but the 3640 won't move traffic despite showing all interfaces up/up and showing no...

    MitchFF0 pointsBadges:
  • SECURE FTP SITE ON Windows 2003

    We have a Windows 2003 IIS server setup behind our firewarll which is a PIX firewall. What is the best method to establish a secure FTP site on this IIS server? I have reviewed this topic on the internet and actually talked with somebody from IPSWITCH and the best method available is to purchase a...

    Mconfer0 pointsBadges:
  • cisco 2811 with 2 fast ethernet ports and 4 vlans

    I need urgent help on this. I have a brand new cisco 2811 with 2 FE ports. The port f0/0 is connected to the internet and the f0/1 will be connected to the switch which has 4 vlans configured on it. I have no idea how to go about doing this. Can someone please help me with the configuration on the...

    Sarfarazkz0 pointsBadges:
  • Routing to VLAN

    I have setup a VLAN on a CISCO 3750 to our remote site and can communicate with PCs on both sides great. The problem arises when I want to route the remote site into our network to have access to servers and internet. I built a router to "route" the VLAN into our network but I have trouble...

    NetNewbie0 pointsBadges:
  • Opinions about firewalls and VPN

    I currently have watchguard firewalls and IPSec tunnels between them and the other watchguard firewalls. We also have remote users VPN into the firewall for access to our network. Our firewalls are fine but we haven't been that happy with the support over the last 5 or so years. We are joining...

    Kevins740 pointsBadges:
  • 10Gbps backbone

    hi i need some help completing a uni assignment. i have a 10Gb SMF cable backbone and i need to connect to a router that supports this. it also need to interface with the rest of the LAN, cat5e cable. i cant seem to find anything viable. any suggestions??

    Mattjgregory0 pointsBadges:
  • VLANs

    In my network we configured 5 VLANs( STATIC VLANs) and placed each switch in each floor. I want to allow my manager to access all VLANs from any where he connects the network. how do i configure this setup? Thanks & Regards, Rajesh.M

    Mraj270 pointsBadges:
  • URGENT PROBLEM – ENABLING INTERNET ACESS THRU VARIOUS SUBNETS IN A WAN CONFIGURATION

    Hello All, I have a problem currently with my current WAN setup accessing the internet.Pls help! Configuration: 4 locations connected via ADSL Leased Circuits in a WAN Setup Internet Access via cable modem connected to Netgear wireless router in 10.10.10.0 subnet NO DHCP Server running in WAN HQ...

    YNWAJLEE0 pointsBadges:
  • Possible Networking Issue

    I am not a network guy but I'm troubleshooting what I think is a network problem(s). 1)Some workstations at my company are experiencing problems with slow saving of audio files when using an audio editor. Event Viewer sometimes has the following error message "A driver packet received from the I/O...

    Idapsdst0 pointsBadges:
  • Network Resource Allocation cum Planning cum Technical Problem

    This is the real commercial problem face by my company. Well, the reason I ask this problem is I salute and respect all of you as I believe all of you are as good as network solution company out there, or even better!! Lets me rephrase the entire problem again. Company expand so fast that the IT...

    Hunkgym5 pointsBadges:
  • Design NEW network cum NEW IT infrastructure-2

    Company expand so fast that the IT infrastructure is not fast enough to cater high volume of traffic; the initial design is not scalable. The number of new branch offices setup caused the company pay a high price in the leased line communication. Salesman and management staffs dial into company...

    Hunkgym5 pointsBadges:
  • Cisco related assistance please, regarding Vlans, WOL, and IGMP (Symantec Ghost)

    Hello all, I have cisco related issues regarding my new cisco router. I have used it in conjuction with 3com switches to route inbetween vlans, which i have segemeted my entire network into (approx 9 vlans, one for server and resources). As stated, my entire network is vlan-ed, and as such my IT...

    Amfony0 pointsBadges:
  • Giant Frame Errors

    We have a Cisco 6509 IOS 12.2(17a)SX1 which has an interface (supervisor 720 card) which reports a large number of Giant Frame errors. We have tried setting the MTU size on the interface to 9126 but the Giant Frame errors persist at an alarming rate (1 in 10). Link is routed point to point link (ie...

    Nazman0 pointsBadges:
  • Connecting two Cisco router together.

    I recently purchased two older Cisco routers 2500 series in order to use for studying and I was wondering what is the best way of connecting the two together using the Serial interfaces. Where can I purchase cables? Do they have a null Cisco cable that will directly connect two serial ports?

    Skepticals0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following