• Should I move to a Cisco 2911 router?

    I currently have a Cisco 2851 Router. My internet is 150/150, I connect using the Ethernet on the router. Any issue with moving toward a Cisco 2911? No routing Protocol, use NAT for 13 public IP addresses.

    gcarson735 pointsBadges:
  • Router on a Stick and RIP – Cisco

    I have two networks with identical VLANs and private IP addresses - I have tried to connect them via RIP and it doesn't seem to be working. The interVLAN routing with Router-on-a-stick works fine with a DHCP dishing out IP Addresses. Just don't seem to have the RIP working correct. A machine from...

    CaptainQwerty155 pointsBadges:
  • Configure multi OSPF Cisco router

    How do I configure a multi OSPF Cisco router?

    iamrechelyn20 pointsBadges:
  • Using Cisco AUX ports to extend serial interfaces

    Unfortunately serial connections are still very much with us. I have a need to monitor older dedicated control and alarm devices. I would like to pin up a serial connection between Cisco routers (2600's) to extend printer, alarm and administrative ports on ancient DOS based control hardware. I am...

    CENCOMstephen5 pointsBadges:
  • Cisco Aironet boot loader problem

    Hi, I am having Cisco Aironet 1242G, in this when try to power on it gives red light status, there is a boot loader issue, can anyone help me to rectify the same?

    ridiin5 pointsBadges:
  • Difference between Cisco 1941 & 1841 router memory

    What is the difference between Cisco 1941W router & 1841 router memory capacities?

    glorydgp20 pointsBadges:
  • Cisco WebEx error message: We can’t connect to your webcam

    When joining a meeting the user gets this message popping up every 5 seconds, "we can't connect to your webcam". The webcam has been tested and works, but something with WebEx isn't jiving with it.

    emerzwski5 pointsBadges:
  • Setting up QoS connection with VLAN

    Hello, I installed a wireless network with access point, router Cisco 2800 series switch with a Cisco Catalyst 3550. I set up 3 VLAN 1, 2, 3. I would like to set up a QoS connection to regular with 60% for the first, VLAN 1 , VLAN 2 for 25% ,3 for 15%. Thank you for your help!

    joelbadji120 pointsBadges:
  • ISP Failover

    Hello all, we are ISP and we manage all of our clients with static route, and for failover we are using PBR manually, so I want to do it automatically when our primary link become less than 30Mbps traffic should be shifted automatically to other link. We have to upstream ISP with two different...

    sultani5 pointsBadges:
  • Phone, email, chat, reporting, single simple choice?

    A client has hired me to help them find a reporting solution for their inbound and outbound phone, email, chat and custom machine chat solution. This is not my area but as I am already onboard and know them well they asked me to help them. The initial group is small, maybe 10 users, but with...

    LMFOCSD5 pointsBadges:
  • Internet not working in VLAN 2

    We have Cisco 2-tier drop-down campus network, that has 2 core switches, with ASA firewall and TMG is working for contents filtration. All clients are connected in VLAN 1 in the core switch to get internet connectivity. We created a VLAN 2 in core switch and tried to give all clients internet from...

    Sahil715 pointsBadges:
  • Cisco router vulnerability in PCI compliance scan

    I recently got a Cisco small business router and our PCI compliance scan flagged it as being vulnerable to a CCS injection/man-in-the-middle. From what I'm looking at, it looks like a OpenSSL vulnerability. I have the latest firmware installed but I can't wait around for Cisco to fix this. Should I...

    ITKE827,860 pointsBadges:
  • What’s the difference between FEX and line card?

    I am confused in FEX and line card, are they different? Thank you in advance

    Pratik2920 pointsBadges:
  • How do I get guest to connect to customer VPN?

    Using Workstation 8, host is Win7 Pro SP1, guest is WinXP SP3, VPN is Cisco. I can connect fine with customer VPN on host, cannot connect on client. Cannot install Cisco VPN Client on guest, says something about wrong processor type. How can I get guest to communicate with systems on customer VPN?...

    RichTheEngineer15 pointsBadges:
  • How to configure in Tacacs+ server and Cisco router for password expiration

    Hi, Currently my Cisco router using Tacacs+ server for authentication. I would like to enhance the password security by forcing the user to change their password every 2 months. After 2 months when they trying to login to the router they will be prompted to key in new password. Is there any way I...

    cslaw20105 pointsBadges:
  • What are the three components that must conform to the same socket type?

    list 3 component that must conform to the same socket type

    Bigervinblye50 pointsBadges:
  • Any suggestion on the MPLS switch I need?

    I’m looking for a MPLS switch that support L2VPN, TE with at least 4x 10G interfaces. Any suggestion?

    merrysmith25 pointsBadges:
  • DIA configuration in Cisco 887 router

    How do I setup DIA configuration in Cisco 887 router?

    junukm5 pointsBadges:
  • Load balancing on a Cisco router

    I have three different bandwidth link & terminated on Cisco router (3900 series), I want to do load balance. i.e.If one link got down traffic should go on other two links. How do I do that?

    nazimnml5 pointsBadges:
  • SIP trunking issue: Authentication problems (CUCM and own developed PBX)

    Hey, I have built a PBX by using the Ozeki SDK and and want to connect it to my existing Cisco Unified Communications Manager PBX by using SIP trunking. By following the instructions of this Cisco setup guide, I have successfully connect the SDK to CUCM, but SIP trunking does not work, because of...

    RajeshCO275 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following