• Cisco Gatekeepers?

    Does anyone have any good basic instructions on Cisco Gatekeepers?

    HarryK5 pointsBadges:
  • HBA not showing WWN

    A SearchStorage.com reader asks: WE have a data center server, 2003 servers and two HBAs in each node. Both the cards are Emulex Fibre Channel Cards. One card is already in working condition. We have recently added the second HBA card. The driver was updated, and I am able to detect two HBAs from...

    JenH0 pointsBadges:
  • SSH configuration on Cisco router

    Please provide me a step to step detail configuration of SSH. Thanks..

    Vinesh123480 pointsBadges:
  • Cisco IP Phone 7961

    Incoming calls are ringing out instead of first being answered by the auto attendant. Typically when this has happened in the past I've been able to go in and reselect the greeting prompt we created. Problem solved. Now that is no longer working. I did notice the prompt greeting was no. 6...

    Ntfsb5 pointsBadges:
  • I’ve been hacked — I think….

    I'm an IT administrator with a little over 500 end users, running Windows 2000 and XP. One of our users is experiencing a problem with her Internet connection suddenly dropping for no apparent reason. When she restarts her computer, everything works fine for awhile, but then the connection drops...

    LMullen0 pointsBadges:
  • Ldap Load Balancing

    Hi, i have a cisco CSS which can balance htttp, tcp and udp protocols. Im trying to balance ldap connections between 2 servers using the tcp protocol but its not working, i´ve read that this is possible. Is there somone that can help me with my cisco load balancer configuration?

    D34095 pointsBadges:
  • How to clear asp routing table on Cisco ASA

    How to clear asp routing table on ASA.

    Superpinky5 pointsBadges:
  • configure automatic switchover from primary to backup tunnel

    Hi All, Some one pl suggest. The scenario is ,we want to configure a backup link to our main branch which is connected to US & we are having dedicated primary link to it & whenever the primary link goes down.Then, we will initiate the backup tunnel from the firewall. We want to configure automatic...

    Vinesh123480 pointsBadges:
  • Cisco Wireless 1200 DHCP Issues

    Ok, I have seen this same issue on several message boards etc. but I have yet to find a good answer so here it goes. I have a network with 12 Cisco 1200 series access points all connecting to 3550PWR switches. The switches are configured with 2 vlans, one for a public wireless LAN and the other as...

    Leeth70 pointsBadges:
  • Cisco ARC Council

    Hello, Does anyone know how to transfer a call directly into voicemail (without ringing)using the ARC council?

    Jimshoe12110 pointsBadges:
  • VLAN Routing

    We have created two VLANs on single Cisco C3560 switch and now want to have inter-VLAN routing. Please explain how to enable it. Please note, we have only one L3 switch, with 10 computers on one VLAN and 10 on other VLAN.

    Swapnilc5 pointsBadges:
  • Configuration between L3 switch 3750 and L2 switch 2960 via trunk port

    I am going to connect three L2 switches 2960 from L3 Switch 3750, means all three L2 switches are connected to L3 switch via trunk switch. Thanks & Regards, And i am going to configure VLANs on L3 Switch. So plz let me suggest,if both switches are in server mode then i should configure VLAN on L3...

    Bhupendra205 pointsBadges:
  • Free Chapter – Implementing Multicast on Cisco Catalyst Switches

    Another free chapter download is available on the IT Bookworm Blog. Written by: David Barnes and Basir Sakandar Book: Cisco LAN Switching Fundamentals Overview: "Cisco LAN Switching Fundamentals provides an easy-to-understand introduction to LAN switching best practices using Cisco Catalyst...

    BrentSheets6,875 pointsBadges:
  • What is meant by SLL? Can you explain? (read at last line of this Cisco paragraph)

    Cisco ASA 5500 Series adaptive security appliances are purpose-built solutions that combine best-of-breed security and VPN services with the innovative Cisco Adaptive Identification and Mitigation (AIM) architecture. Designed as a core component of the Cisco Self-Defending Network, the Cisco ASA...

    Fayas65 pointsBadges:
  • Cisco Networking

    How can we provide load sharing on single router of two ISPs. plz let us suggest on the same.

    Bhupendra205 pointsBadges:
  • Cisco WCS Perfomance Profile question

    In Cisco WCS, when you click CONFIGURE- ACCESS POINTS and on a particular ACCESS POINT you clck on Perfomance Profile we are shown with a bunch of parameters like Max Clients, Min Failed Clients (#), Coverage Level (dB) and Min failed Clients (%) and a few others. But just can't seem to find in the...

    mystergag30 pointsBadges:
  • Two routers configration

    I have configured two routers completly the two router connected by them serial, router 1 can bing to interface e 0 and s 0 of router 2 and router 2 can ping interfaces e 0 an s0 of router 1 but network on e 0 of router 1 cannt bing s0 of router 2 and inverse right what is the problem

    Monkez50 pointsBadges:
  • VLAN route on a stick

    Hello Guys I have some concern regarding my VLAN route on a stick, I created 6 VLAN's on Cisco 1841 router in Ethernet port 0/0 with Local IP 192.168.2.x then I created sub interface in the same ethernet port0/0.10, port0/0.11, port0/0.14, port0/0.15 all VLAN's route to my local default gateway...

    Bsm122045 pointsBadges:
  • Cisco Encryption

    Is there a way to encrypt console port and vty port on a cisco switch/router using type 5 password encryption?

    Jd0085 pointsBadges:
  • How to put Access Control List in Cisco WS-C2960-24TT-L

    What are the commands to put Access control List in cisco WS - C2960-24TTL

    Whyshree5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following