Cisco

how many ports in cisco 2811 router

how many ports in cisco 2811 router

Windows Vista Ultimate 64 bit VPN To Work Network?

Hi Guys, I just found the hard way that Cisco doesnt have 64 bit VPN Client. i googled a bit came up short.....every search was going towards install XP with Dual Boot and Use XP for work. I need your help in setting VPN using Vista's Network Setup. Start -> Connect To -> Setup a...

Cisco AcessControlServer - Authentication

Hi I'm configuring a Cisco ACS for our diploma thesis and now i have this problem: The Authentication of the IETF Radius-server operates properlym but the authentication of the nac doesn't work. All clients come in my quarantine-vlan. In the logs there is the SharedRAC: Quarantine_RAC...

what IOS requirement to configure BGP on cisco router

Does Cisco 1841, 3845,1721 ,1750 Router support BGP or not? If yes, then which minimum IOS with version is required to support this?

Cisco T1 configuration

Currently have three cisco 2600s connected via T1s to a 3600 at the main branch. Right now the T1s are connected to TSU 100 (one 120) units, then into a serial WIC (1T) in the routers. We have T1 DSU/CSU cards to replace the serial wics. What would be the best configuration for the new WICs? (we...

Multi-Vpn Setup: can access all subnets when in office, while vpn'd can only access local subnet

I am having troubles with vpn users being able to see other subnets. It is set up as follows Any computer locally on the domain can see / ping/ access any other computer on any subnet / location. When someone vpn's into any of the routers they can only see the local subnet of the...

Cisco pix vpn access

I have 1 main office and 3 remote offices connected by Cisco Pix's. The main server and email server are in the main office. As long as the computers are on the network everything is fine. The main office has a vpn set up for remote users and it works fine. The other offices want this set up...

What's broadcasting and which switch will fix timed-out requests?

I am an Internet distributor of Exatt.net. When my customer pings the gateway it gives me lots of timed-out requests. Exatt.net says it broadcasts in your network. What does this mean, and how can I fix my timed-out requests? I use a hub. Someone told me to use a management switch, but I have no...

CCNA need to know Dos Command line/Registry/shell script???

For any of Cisco certification job , do we need to know how to do DOS commmand line, fixing registry and writing shell script??? What I actually want to know is does cisco people only dealing with Physical side of newtork such as switch, routing & network configuration. do they need to know much of...

Locked out of Cisco Router - Password reset doesn't work

do work for a local non-profit group. Apparently some prior network admin left under unhappy circumstances and did something to the cisco router(s) there. We had no password access, so I went through the password recovery/reset procedure. Everything seemed to be fine except for two little...

Cisco 1310 point to point wireless bridge with WPA2

Tried using the document provided on the Cisco website to create a point to point wireless bridge and it works fine with WEP encryption, but how do I get the WPA2 encryption to work since WEP is not secure ? I also found a document on the Cisco site about WPA2 encryption but that is directed more...

how to configure your cisco router to dial remote server has isdn modem

hi : i have 2811 cisco router with bri interface , and i want to know away to make this router call remote server has isdn modem , but all the ways didnot works , can any one help me with that and i;ll be thankfull plz

ONS15454

I need to test OC-48-LR1550 CIRCUIT PACKS AND I DO NOT HAVE TRUE ACCESS TO THE TL1 COMMAND LINE.

Cisco pix501 VPN at home.

A question submitted on SearchNetworking.com I just got IPSEC passthru working. IPSEC passthru is the most important feature because from home I have to VPN back to ASA at work. I would also like when I'm at work to VPN back to my home (VPN the other way that terminates on my pix 501) This...

OSI and Cisco

differences and similarities between thye OSI reference model and the Cisco hierarchial model and how they are used

vpn client for PDA in a Cisco system

I had been using Movian VPN on an I-mate jam, which worked fine untill Cisco stopped supporting it. I have now changed to an HTC P3600i, does any one know if there is a VPN available that will work with this phone linking to a Cisco Systems VPN Client

VOIP help

I have avaya voip phones on my network and I need to setup an ip helper to get them over to a particlaur vlan. The reason is that if they go down they can not find their config info. What should the statement on the Cisco router look like

Cisco IOS default config not seen in running or startup configs

Is there a list of commands that do not show up in the running or startup configurations that are default. I am trying to locate the commands that are not visible in startup or running configs in 12.2 or newer IOS.

bind 3rd ip in fast ethernet

I want to baind one more ip in fastether nat i have baind allready two ips i want one more how can i baind one more ip in router cisco 1700 series routher

Cisco Catalyst 3750 routing issues

I need help configuring a simple routing scheme for a 3750, I have a visio diagram of a very simple network, let me know if anybody can help. thanks