Availability, Bandwidth, CCNA, Cisco, Cisco Routers, Cisco switches, DHCP, DNS, Ethernet, FTP, Hubs, IP address, IP addressing, IPv6, LAN, Network, Network administration, Network connectivity, Network design, Network management, Network management software, Network monitoring, Network protocols, Network security, Network testing, Networking Equipment, Networking services, NIC, Performance management, Ping, Printers, provisioning, Remote access, Remote management, Router configuration, Routers, SDN, Switches, TCP, TCP/IP, VLAN, VPN, WAN, Wi-Fi, Wireless, Wireless Access Points, Wireless in 2010, Wireless networking, Wireless routers, WLAN VIEW ALL TAGS
I have 3 cisco wireless connected to our network. Same models with software version 12.3(8)ja. After every 2-3 days, the ethernet stops responding. The client is able to see the ap in wireless networks, but they dont get ips or there is no connectivity. We have to power cycle them every now and...
we have cisco APs, one we have installed, configuratin is OK as matches older config. Problem is that clients is associating with the AP and showing Association in GUI, but When client associates with AP it gives RTO, while same client associates with other APs it is pinging. Please suggest