• VLAN filter implementation configuration commands

    how to do vlan filter implementation in cisco 6506 switch.

    Vlanfilter5 pointsBadges:
  • cisco 4507 gigabit int down line protocol down

    hi can any one help with this i am setting up 4507 with fiber connections but int never comes up it says gigabit int down line protocol down

    Ank19825 pointsBadges:
  • Enable SSH

    Hi All, I have bought a new c3950 switch, what should i do to enable ssh service for the first time.Should we install cryptographic image if so how to install it.

    Vptechie70 pointsBadges:
  • VLAN per switch limitation?

    I have a Minolta server and copier which need to communicate across two switches - where these switches have a vlan per switch limitation. From what I can see in a Wireshark sample, the printer is trying to establish communications with the server using broadcast traffic. Is is possible for this...

    Smidgen5 pointsBadges:
  • Cisco 1548U: A managable switch?

    I have a aCsico 1548U.  Unfortunately for a project that I am working on right now we need a managable switch, and there is a huge lack of funds.  Is it possible to make the 1548U into a managable switch so that I can achieve my goal?

    Jhazard11240 pointsBadges:
  • STP Altn BLK port is green

    Can any one tell me why the block port, which I thoght should be amber, is green?  I have 2 x 2950 swtiches and 2 x 3550 swtich, all initial config (no config), connected to each other with cross cables. Everything seems to work as it should when check with IOS display, but all ports are green,...

    Smanodam25 pointsBadges:
  • setting up a TRUNK on cisco switch

    I want to know if there is a to combine different subnet on one cisco 2950 switch with trunking ... i have .0, .31. and .9. If someone can give me an example. that would be wonderful. Right now i have one trunk going to the attic switch from the main switch room which is .35.

    Kwt712555 pointsBadges:
  • Can’t browse the internet via the PIX

    Hay everyone, here is my situation i have two 3700 cisco router one 3750 switch and one 525 pix firewall. I connect one of the router to a cable modem and received a dhcp address from then i NAT all out going address, and that works fine. Now i am trying to add the 525 Pix to my network but i can...

    Kolangi10 pointsBadges:
  • Best Web managed switch? HP Procurve or Cisco

    Loking for a webmanaged switch. Nothing fancy but want to be able to add a few VLANs etc. Was ooking at the Procurve 1700/18000. Does anyone reommend HP over Cisco or any other vendor i should be looking at.

    ITKE344,970 pointsBadges:
  • mac addresses on cisco switches

    where do you get the mac addresses to statically configure ports on a switch? why would you need to connect 2 switches together? ccna study. thanks any info. appreciated.

    1010111015 pointsBadges:
  • ciscl acl

    i have 3 core switches having 40 vlans users in vlan 40 only communicate with vlan 40 and other should  be deny except one ip 192.168.5.25 can access to vlan. no hsrp for the vlan 40 configured. root bridge for vlan 40 is core 3 switch. i try various ways but i am not able to do exact and specific...

    Ekansh400 pointsBadges:
  • installing a new switch

    What all needs to be done when upgrading and adding new switches where old ones exist

    Rmullis5 pointsBadges:
  • Monitoring network end user operation with a cisco router

    Hi    One of my client requires a solution for monitoring end users traffic  going through a cisco  router.There is a lot of problem with over utilisation of WAN link by end users. The company need a solution for monitoring operation of end users(who & where they are trying to communicate).  ...

    Puli45 pointsBadges:
  • BTS 10200 command definitions

    Are there definitions to the commands on the Cisco BTS 10200 switch whereby I can understand what each command input means

    VOIPEng5 pointsBadges:
  • What are the similarities in Cisco and HP ProCurve switching protocols?

    like layer 2 protocol in cisco called VTP , while in hp procurve is called GARP , I need to know the other similarities in both for layer 2,3

    Henno5 pointsBadges:
  • Setting up Cisco 2950 switch

    Hello, New to itknowledge exchange... I have a hand me down Cisco 2950 12 port switch. I currently have assigned to my Cable Modem4 Static Public IP's Note: Not real but used for example. 70.66.131.1 70.66.131.2 70.66.131.3 70.66.131.4 I run 3 servers in my basement all of which I have configured...

    Perkster5 pointsBadges:
  • Can’t connect D-Link media converter with Cisco switch 2950

    I am using Cisco switch 2950 connected with a D-Link media converter. When power is reset, that switch is up but the port connected with the media converter is down. After I reset power of the media converter, the link comes up. What's going on here, and how can I fix this?

    NetworkingATE1,545 pointsBadges:
  • Cisco Networking

    We have Cisco 4506 Switch, At one incidence it got down due to uncertain power failure. I dont know how to boot it again when power will up

    Ekansh400 pointsBadges:
  • Networking

    show ip arp | in [em]ip address[/em] This command is used to find mac address and Switch port of ip address, but how can we find IP Address from Mac Address in Cisco Switches ?

    Ekansh400 pointsBadges:
  • VLANS and cisco 2960 switch

    VLANS and cisco 2960 I have a new cisco 2960 switch gig 0/1 connecting to a 3560 on gig0/9. the problems is my vlans will not come up. I have configured another switch the same exact way and it works fine. The only line in the commands of bith switches that is different is ip http secure-server.

    ITKE344,970 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following