Cisco 2960S 24port switch with Poe need to connect with all Avaya 9611G phone for call center setup. I am doing this first time so kind of little …..I understand need to config Data and voice VLAN. Please advise for complete configuration if anyone can. Would really appreciate it! Thanks.
Answer Question | November 15, 2012 5:58 PM
Avaya, Cisco switch
Hi all I want to upgrade the image of cisco switch 3750 12 S from c3750-ipbasek9-mz.122-55.SE5.bin to c3750-ipservicesk9-mz.122-55.SE5.bin so my question is if I bought one image can I install it to more than one switch same model. Thanks
Answer Question | March 29, 2012 8:23 PM
Cisco 3750, Cisco switch
I recently aquired a Cisco 3500xl switch and have 0 experience setting switches up. I’ve been searching the nets for a few days trying to find a simple tutorial for setting this switch up for a home network. I don’t need to create separate VLans or do anything complicated. I basically want to set it [...]
Answer Question | March 31, 2012 1:07 PM
Cisco 3500 XL, Cisco switch, Cisco switch configuration, Switch configuration
I have just added a new blade server HP PROLIANT BL 465 G7 to a HP C7000 ENCLOSURE. The server was installed on slot 4 of the blade enclosure. It has a QLOGIC hba installed on it. There is no operating system installed. The fibre cable has been connected to the pass through module at [...]
Answer Question | May 4, 2011 9:32 AM
Blade servers, Cisco switch, HP ProLiant, Qlogic
I want to install two 4506 cisco switch to my LAN as core switches one as primary and the other is secondary (failover), and also to do routing to LAN and internet, how can I do that?
Answer Question | March 30, 2011 10:30 AM
Cisco 4506, Cisco Catalyst 4506 Switch, Cisco switch, Cisco switch configuration
Need to know what the switch port configuration would look like for a cisco 2960s switch with an Avaya ip 9611G phone and pc connected to the phone.
Answer Question | March 7, 2011 1:47 AM
Avaya, Cisco 2960, Cisco switch, Cisco VoIP System, VoIP
Is there a way to team 2 cisco switch ports so that if a cable is accidentally pulled, a user multi-million transaction wont be affected at his desk. How can we make sure that if a port goes down, a user’s pc is still up?
Answer Question | February 8, 2011 2:45 PM
Cisco, Cisco switch, Redundancy
My old setup for cisco voice network- PRI Line router –> CCM 4.1 –> cisco 4503 core switch–> Access switches –> Ip Phone devices. Ip Addresses are statically configured in all ip phones according to vlans. tftp server is our call manager for loading ios flash to ip phone. Now my company is asking for enable [...]
Answer Question | August 20, 2010 9:19 AM
CCM, Cisco 4503, Cisco switch, Cisco VLAN, DHCP, TFTP Server
Is there a conversion utility to Replacing HP switch w/ a cisco switch???
Answer Question | January 15, 2010 5:28 PM
Cisco 500, Cisco switch, Cisco switches, HP Switch
Hi all, I am a newbie in network domain and will need your expertise :p Scenario: 2 grps of servers (grp A – 3 units, grp B – 10 units) are connected in the same segment on a Cisco 2960g, WS-C2960G-24TC-L. Each server only has one 100Mbps network interface connected in this segment. The task [...]
Answer Question | January 7, 2010 1:43 AM
Cisco switch, Mass Broadcasting, Switches