• How to put Access Control List in Cisco WS-C2960-24TT-L

    What are the commands to put Access control List in cisco WS - C2960-24TTL

    Whyshree5 pointsBadges:
  • Cisco 3500 Switch How to configure

    I've been given a Cisco 3500 XL Switch. Question is what can i do with it? I was hoping to split the ports into VLAN's for a start preparing for CCNA exams. Up to now I've mainly done book work. I want to get my 'hands dirty'. Is this a manageble switch ...? - i dont know. I've tried Consoling into...

    Pelvicthrust170 pointsBadges:
  • Remove running configuration in Cisco routers and switches

    How do I remove running configuration in Cisco routers and switches? I tried to run erase config/all, erase flash: nvram etc but it does not work. I want to erase all running config in devices. Can anybody help me?

    Ekansh400 pointsBadges:
  • Cisco switch 4506 active and standby configuration

    I want to install two 4506 cisco switch to my LAN as core switches one as primary and the other is secondary (failover), and also to do routing to LAN and internet, how can I do that?

    Abdelrahman35 pointsBadges:
  • Cisco layer 3

    what command do we use for a layer 3 switch so it can also act as a router

    Blangco5 pointsBadges:
  • Basic Cisco Switch Setup for Home Network

    I recently aquired a Cisco 3500xl switch and have 0 experience setting switches up.  I've been searching the nets for a few days trying to find a simple tutorial for setting this switch up for a home network.  I don't need to create separate VLans or do anything complicated.  I basically want to...

    SpiderSpartan20 pointsBadges:
  • Cisco switch configuration?

    [strong]I have one distribution switch(Cisco) and linked to many access swtitches(d-link) what type of configuration should I do???[/strong] [strong]No VLAN in my network[/strong]

  • Optimize Multicast with deployement ghost image (2960 connected 3750)

    Hi, How methode to Optimize Multicast with deployement ghost image (2960 connected 3750). Because, since i have switch cisco the bandwith decrease for image deploy. The bandwith very slow ?. The igmp snooiping has activate. Best regards.

    Hben35 pointsBadges:
  • Anyone know of a free simulator for Cisco router and switch configuration?

    Can anyone recommend or suggest a free simulator for Cisco router and switch configuration? Thank you!

    NetworkingATE1,545 pointsBadges:
  • Intervlan routing and internet access

    I configure 2 vlan on my l3 switch 3560,  1) vlan 1 192.168.1.0/24 2) vlan 2 192.168.2.0/24, Intervlan routing is working fine. Now i connected one router 1841 to l3 switch on port fa0/4 (which i issue command no switch port and give ip address 192.168.3.5/24) router interface is f0/1 ip address...

    Ekansh400 pointsBadges:
  • Cisco Switch trouble

    I have a network with 250 pc's using a 10.10.1.x with 255.255.255.254 mask. 1) How do I subnet? (I need a specific example) 2) Do I need another router for subnetting? 3) We have Cisco 2950 switches on the LAN. I know VLANS can be created on the switches. How do I do the VLANS? 4). At time the...

    PLATO5 pointsBadges:
  • PoE feature disabled in Cisco switches

    Hi guys The scenario: we have more than 500 switches around the camp, all of them cisco switches, and everytime we have a thunderstorm the poe features in most of the switches dies, stops working, only data can go through, so my question is: its possible that after the thunderstorm the switch...

    Zakk40 pointsBadges:
  • CISCO 4503-SWITCHES SMPS FAILURE

    in my network 4503 switch is installed. the Power supplies of 4503 is frequently failing. even power ground is fine. and Steabilizer and UPS is also connected. Suggest me the reason of failure.

    Syedummar5 pointsBadges:
  • Cisco catalyst 4506 switch

    Dear All, Please suggest me for the following. We have core switch 4506 in our company. It is having redundant power supply and one is not working. Now I need to replace the faulty power supply. Can i install new power supply with out shutting down the switch or not kindly suggest in brief.

    Ekansh400 pointsBadges:
  • Bandwidth-controlling

    I have Fiber link for 6 MB with 2921-Router. I wan to segreegate bandwidth 4/2 for 2 Different Department. I have also 2 Catalyst 3750 switch for each department. I need to fix bandwidth 4/2 with access list. Please give me the solution?

    NetworkBandwidth30 pointsBadges:
  • Cisco 2950 switch Vista network pull issue

    I'm in a computer lab trying to load Vista enterprise software on a PC via a network pull. This involves booting a disk in the PC which brings up a screen to type in a shared network drive on our network. For example: \\abc-prl.americas.company.comxyz_7_network_pullcontents. When the PC is...

    Lpga14145 pointsBadges:
  • Replacing existing ConnectGear 8 port switch with Cisco Catalyst 2950 24 port switch

    My knowledge of networking is rudimentary. I need assistance in replacing a ConnectGear switch in an existing network with a Cisco Catalyst 2950. The network consists of 9 clients PC's and one server running Windows Server 2003. The existing router is a Linksys BEFSR81 (8 ports) and internet access...

    Jayhawk19445 pointsBadges:
  • Cisco 1548U: A managable switch?

    I have a aCsico 1548U.  Unfortunately for a project that I am working on right now we need a managable switch, and there is a huge lack of funds.  Is it possible to make the 1548U into a managable switch so that I can achieve my goal?

    Jhazard11240 pointsBadges:
  • STP Altn BLK port is green

    Can any one tell me why the block port, which I thoght should be amber, is green?  I have 2 x 2950 swtiches and 2 x 3550 swtich, all initial config (no config), connected to each other with cross cables. Everything seems to work as it should when check with IOS display, but all ports are green,...

    Smanodam25 pointsBadges:
  • mac addresses on cisco switches

    where do you get the mac addresses to statically configure ports on a switch? why would you need to connect 2 switches together? ccna study. thanks any info. appreciated.

    1010111015 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following