Cisco Routers

2811 router

sending a fax and stay connected on 40 sec then drops. Can this be an opt missing?

iipsec vpn between cisco routers, using dsl modem(NAT ROUTER)

Hi, I have two office and both office have broadband connection. I would like to know how to connect these sites using (ipsec vpn ) cisco routers through dsl modem connection.Both offices have static IP. I have lab experience in configuring site to site ipsec VPN. Now I am confused about...

Cisco: Setting a VLAN across a network

hi,newbie here :) I am working on Packet Tracer 5.0 and I want to setup 2 vlan's that spread across a network. I attach the view of the network: 2 of 3 hosts on switch 1 belong in vlan10 and the other one belongs to vlan20. Likewise, 2 of 3 hosts on switch 2 belong to vlan10 and the other...

Tricky EIGRP routing quesiton

Hello Sudhanshu, I have a bit of a tricky question that I've been wondering about. I'm going to be setting up over a dozen new ASA5510s in front of preexisting 2821 routers. I currently have EIGRP running in GRE tunnels between the sites. I have heard that the ASAs do not support GRE...

Cisco 2811 Fast Ethernet and LAN configuration

i have cisco2811 router and i want to configure its 2 fast ethernet on my isp and PC or lan. can someone with a good heart to help me what command i will use on configuration level on both router and lan to have an internet connection.

Cisco 2811 - Divide Bandwidth

We have Cisco 2811 router with on serial interface and two fast ethernets. We planned to take 1 mbps leased line and we have to divide it into two parts. For one network is should be 300 kbps and the rest bandwidth for another network. Can any help in this.

Cisco 2811 config

Hi guys, I have two Cisco 2811 routers. Each of them has 2 Fast Ethernet and 1 Serial interfaces. I have two WAN connections on each router. One of them via FastEthernet0/0 and another one via Serial. I try to connect these two routers with redundancy scheme. For example, if primary connection...

Cisco 1841 security bundle

Hi, I am an heir of a cisco 1841 router with an IOS that doesn't have the security bundle like firewall, QoS, VPN and those other staff that are suppose to be included asside from the basic features. The router is performaing well but I want to uprage its IOS. However, its out of support. Could...

Cable required - Cisco 2811

I need to know the type of cable to login to cisco 2811 router. Can i use the LAN port on my laptop, use a straight cable and connect through the console port of the router? Please help

Share two broadbanc connections in 2811 router

I am having a 2811 router with one Serial interface and two Fe. We have two broadband connections. Can any one help how to configure router with these specifications. Thanks in advance

How to check the loop in Cisco router?

i want to know to how to check whether is a loop occurred in the network? because load in tx and rx in increasing...

Network problems Cisco router config

Hi experts, I want to connect with a web server in remote end using leased line connectivity through Cisco 2800 series router I have a flat network with 500 users in network. All PC’s default gateways are configured the IP of routers Ethernet. When I am ping the web server from LAN it is taking...

adsl router v/s cisco router

WE ARE USING ADSL ROUTER (LINKSYS)FOR INTERNET BUT I WANT TO KNOW THAT IF WE USING CISCO 800 SERIES ROUTER WHAT IS THE ADDITIONAL BENIFIT AND ALSO I WANT TO KNOW IS LINKSYS ENOUGH TO SECURE OUR OFFICE NETWORK THROUGH INTERNET,CAN U TELL WHT IS THE DIFFERENT BETWEEN ADSL ROUTER AND CISCO ROUTER

network problem

Hi experts, I want to connect with a web server in remote end using leased line connectivity through Cisco 2800 series router I have a flat network with 500 users in network. All PC’s default gateways are configured the IP of routers Ethernet. When I am ping the web server from LAN it is taking...

How to set up a Cisco ASA 5505 VPN using the client behind a Cisco 1841 router using the serial interface

how to set up a cisco asa 5505 vpn using the client behind a cisco 1841 router using the serial interface

Telnet to a Cisco 1700 Router

I have a cisco 1700 router, when I telnet to it from a remote site, it comes back saying "connection closed by remote host". I have checked the vty lines and verified the password. even more interesting is that when I telnet to it when directly connected via ethernet, it allows me to connect....

Load balance on WAN interface using static router between two ISP

By using static router, i need to configure two lease line of 3 mbps and failover

Cisco 2811 VLAN Usage

I inherited a network that has a Cisco 2811 router setup with the following: interface FastEthernet0/0 no ip address no ip route-cache cef no ip route-cache duplex full speed 100 ! interface FastEthernet0/0.18 description Data VLAN encapsulation dot1Q 18 native ip address 10.221.18.1...

Best router to practice on for CCNA

I am currently attending a Cisco Networking Academy instituion with the goal of obtaining my CCNA. I would like to purchase a router to practice on. The 1800 series is quite expensive but i Have seen 800 series routers cheap on ebay. I saw a brand new 802 for $99. Are the 800 series good for...

VPN

I would like to set up a VPN on a Windows 2003 sever. My problem is that we have a Cisco 2611xm router that our internet comes through. Is there a way to port forward through the router to the Server ? Being new at this I take any advise. Have looked over the internet and found stuff and even put...