How to connect two subnets and two isp’s with Cisco RV042G
I recently bought a Cisco RV042G dual wan router and it served it’s primary function of load balancing two internet connections straight out of the box! I was impressed.. Regrettably I hit the limits of my (limited) networking knowledge with the following problems. Let me describe my network first: ISP1: VDSL connection 50/5mbit connected to [...]

Answer Question   |  January 15, 2013  7:44 PM
Cisco router, Subnets

RIP, OSPF and EIGRP in same network
If I have 3 routers connected to gather and every router connect to it one PC I use for first one rip and for second one ospf and for last one eigrp. Its not ping from PC on first netwoke to PC in second or last network why and it ping from router one to [...]

Answer Question   |  January 8, 2013  5:11 PM
Cisco, Cisco router

“ip http secure-server ” command is not available
Hi, I have Cisco 2801 Router, I want to enable https. But “IP http secure-server ” command is not available !!!!!? System Version GSHDSL_Router#show version Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 15.0(1)M5, RELEASE S OFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Wed 23-Feb-11 15:16 by prod_rel_team ROM: System [...]

Answer Question   |  January 7, 2013  11:40 AM
Cisco 2801, Cisco router

How to configure Cisco router 2811
Halo We purchased a Cisco router 2811 with two Ethernet ports: Fast Ethernet 0/0 and Fast Ethernet 0/1, but without WAN interface cards! How can I configure one of the ports to work as a WAN port and the other to act as LAN port, so as to enable the 2811 router exchange information with [...]

Answer Question   |  December 20, 2012  12:33 PM
Cisco 2811, Cisco router

Is my router WRT120N still effective?
I am using CISCO router WRT120N in my Internet Cafe. Now I have a plan to increase the number of computers to 50 PCs. Is my router WRT120N still effective? Note: I don’t provide Wifi for clients.

Answer Question   |  October 29, 2012  6:15 AM
Cisco router, Cisco router configuration

Router Cisco 2800
How to restore iOS Cisco router 2800 card reader?

Answer Question   |  October 9, 2012  11:33 AM
Cisco 2800, Cisco router

Cisco ACS 3.4
I have Cisco ACS configured all the routers and switches, but i am not able to login through console port because of policies overridden by the ACS. pelase let me know the command to isolate ACS from the console port.i

Answer Question   |  May 30, 2012  2:48 PM
cisco ACS, Cisco router

WAN connectivity
Hi, I had a query regarding WAN connectivity. Can we provide WAN connectivity on ethernet ports(copper as well as fiber)? Because I am assuming to terminate T3/E3 WAN connection from SP on this port to provide 10 Mbos or higher bandwidth. And do this can be provided on branch routers of cisco like 2900 series.

Answer Question   |  March 9, 2012  7:59 AM
Cisco router, WAN

vb.net telnet
my job is to telnet a cisco router, pass the credentiials and build configuration. after building the same, i have to search for a line in the config. i want to automate this whole pocess with vb.net. help me

Answer Question   |  February 29, 2012  8:41 AM
Cisco router, VB.NET

how to connect LAN to WAN server
helo dear… Please help me to connect my default LAN IP (192.168.1. …) through the cisco router to WAN IP… (212.70. _._)

Answer Question   |  July 9, 2011  9:34 AM
Cisco router, Cisco router configuration, LAN, Local area networks, WAN

Configuring 6224 for redundancy (with load balancing) with different private wan providers
Hi, We have different locations connected by two different WAN providers. Each site has a 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and [...]

Answer Question   |  June 2, 2010  1:22 PM
Cisco router, Dell PowerConnect 6224, Grep, WAN

Cisco 2621XM No Flash found in the router
CIsco 2621xm show ver: missing the flash memory size, even there is a 16MB on board and 32MB add on show flash: error command not reconized. there is no flash at all, but router boot up and work. however you can not do any configuration like “int fa0/0″ unrecognized. please help

Answer Question   |  March 23, 2009  9:36 PM
Cisco router

Cisco 3825 Router
Can cisco 3825 router support 45mbps link?

Answer Question   |  November 9, 2012  4:50 AM
Cisco, Cisco 3825, Cisco router