• Cisco 2921 router

    we are deploying the cisco 2921 router at the branches of our organization. branch here consists of about 10 pple and the mostly do alot of replications and remittances of data and send such traffic acros the wan. what type of perimeter protection can be used for such a network as the ASA 5510 is a...

    Djsizzle15 pointsBadges:
  • how to connect LAN to WAN server

    helo dear... Please help me to connect my default LAN IP (192.168.1. ...) through the cisco router to WAN IP... (212.70. _._)

    Linjo5 pointsBadges:
  • Load balancing

    what is the Cisco configuration to do the load balancing for 4 MPLS ethernet redundant links in one cisco router

    Skalboz10 pointsBadges:
  • VPN Configuration

    could anyone help me how to configuring vpn?

    Hangsiput15 pointsBadges:
  • PPP VPN Tunneling on Cisco Pix 501

    I have two Cisco routers one is a 501Pix(located at branch Office), the other is a 515E Pix (located at main office). I've configured a vpn tunnel to the router at the main office. The router at the branch office is connected, I can browse the web and the vpn led is lit. I can connect to a...

    Y2kane4eva30 pointsBadges:
  • Is there any configuration on Cisco router to enable it to respond to ARP from IP source 0.0.0.0?

    When I configure my PC with a static IP the PC issues an ARP packet to the IP I configured with source IP 0.0.0.0 If any other PC (windows/Linux) have this IP I get a reply to my PC. If the Cisco router is configured with this IP my PC doesn’t get a respond to the ARP and this IP will be active...

    ITKE352,420 pointsBadges:
  • Cisco configuration

    i have newly setup cisco 1841 router and i didn't create user and its password i just want to know that its default user or password will expired after 15 days or not. it is necessary to create user or password or not

    Kaleemu5 pointsBadges:
  • trusted and untrusted interface

    what is the meaning of trusted and untrusted interface in security configuration in cisco router?

    Mohadbazzi47170 pointsBadges:
  • Will a crossover cable connect these routers?

    will a crossover cable connect these routers??

    Pfahl22120 pointsBadges:
  • Cisco 2524 router trying to set up a home lab to study for the ccna exam

    My question is i have a 2524 router trying to set up a home lab to study for the ccna exam and i also have a 2924 xl switch the router has only ethernet 0 and 1..My quetion is can i connect the 2524 router to the 2924 switch which uses fast ethernet..would it make any difference in speed

    Clavender7910 pointsBadges:
  • Cisco Router configuration

    I would like to know all the configurations and changes that can be done in a router.

    Shehzanessak5 pointsBadges:
  • Advertised network routes are not showing

    I ran into this problem; I am setting up a home lab Router A advertised routes are showing on router B Router B advertised routes are not showing on router A. Do you have any idea?

    Toumy45 pointsBadges:
  • Cisco router 2821 configuration NAT and DHCP

    I trying to make it works but still to no avail. Maybe somebody can help me with my problem. I configure my router 2821 with 2 Gic interface and 16 ports fastethernet. Here's what I need to accomplish: Int Gi 0/0 WAN-outside Int Gig0/1 LAN-inside VLAN 5 DHCP  (another network) Note: LAN users can...

    Bonsan15 pointsBadges:
  • d-link switch to cisco router

    how can I include 3 ip addresses in a single fast ethernet port of a cisco router if the switch connected to that port is a d-link switch? do i have to create subinterface on that fast ethernet port?  

    Yeahboy900 pointsBadges:
  • Cisco 2811 ccme config

    Hi guys, I have two Cisco 2811 routers. Each of them has 2 Fast Ethernet and 4 7960 ip phone. i need to set it up for lab purposes. how do i configure this?

    Joshlo5 pointsBadges:
  • Load balance on WAN interface using static router between two ISP

    By using static router, i need to configure two lease line of 3 mbps and failover

    Pranab12310 pointsBadges:
  • Updating firmware on IOS Cisco router

    Our firmware on our IOS Cisco router is outdated. We have been tasked to update it to the latest version. How can we do this? Where do we get the file from and what is a fttp server and how do we use it in conjunction with flashing the box?

    NewnanIT1,110 pointsBadges:
  • Ports Configuration for 2811 as a Terminal Server

    Is there any possible way to disable ports on a Cisco 2811 router that is configured as a terminal server

    SRR5 pointsBadges:
  • Installing an IOS on a Cisco router or switch

    I would like to know the process of installing an IOS on a cisco router or switch. What are the steps and commands for installing the IOS.

    Kartikc920 pointsBadges:
  • Telnet to a Cisco 1700 Router

    I have a cisco 1700 router, when I telnet to it from a remote site, it comes back saying "connection closed by remote host". I have checked the vty lines and verified the password. even more interesting is that when I telnet to it when directly connected via ethernet, it allows me to connect....

    Bahlezi140 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following