We require assistance in configuring site2site vpn (Juniper-NS5GT-ADSL-WLAN in a branch office with ADSL connection (dynamic IP) and the pix 515e OS version 8.0 in the head office with a fixed IP) Software/Hardware used: CISCO PIX Firewall version 8.0
VPN configuration, Cisco PIX, Cisco PIX Firewall version 8.0
I want to monitor bandwidth in ipsec vpn tunnel. I am able to monitor the outside interface of my pix throught prtg but i need to monitor specially my vpn tunnels. can any body suggest me any software availabie ? Software/Hardware used: cisco pix 525
what is the command in pix 525 i want to know bandwidth utilization for my l2l vpn Software/Hardware used: cisco pix 525
we have vpn l2l tunnel name xyz 192.168.2.5, 192.168.2.6 are maped to the tunnel the vpn tunnel working fine but we added another ip 192.168.2.6 to vpn tunnel and move this server to dmz It is showing that the traffic cumming from outside is decrypting but it is not encrypting and going back....
i have one server which is inside firewall ip address is 192.168.15.5 This server is accessible via l2l vpn to the outside ip the lan to lan vpn is working tunnel peer ip is 100.20.5.21 my access list is access-list inside-nat0 extended permit ip host 192.168.15.5 10.80.80.0 255.255.252.0...
in my mind, Watchguard, Netscreen and foritnet are same.(very little difference) but compare with Cisco PIX or ASA, what is it advantage? Software/Hardware used: Hardware
Hay everyone, here is my situation i have two 3700 cisco router one 3750 switch and one 525 pix firewall. I connect one of the router to a cable modem and received a dhcp address from then i NAT all out going address, and that works fine. Now i am trying to add the 525 Pix to my network but i can...
Hello All, I want to copy ios of pix version 6.3 from flash to tftp……….. Can someone give me the exact command for this? Thanks Rahul
i have 2 internet connection in company so before its working through proxy server, now need to change via 2 setelight modem - roter - pix - switch so please help me.
I've recently developed a need to connect 2 networks together. One network (PIX Network) is currently connected to another network (DOMAIN 1) already via IPSEC site-to-site VPN. The other (ASA) is connected to many other sites via IPSEC site-to-site VPN and is those sites main domain server (DNS,...
I am long-winded, so please bare with me! We are having trouble opening pdfs on certain websites. Currently PDPworks as well as one of our vendors who uses twelvehorses.com as a pdf server. We are unable to open a pdf from pdpworks at all and are hit and miss with opening pdfs from...
Need asistance with ISA rules to allow ASDM Launcher (from authorized workstations) to connect to the PIX Appliance for management purposes. I can connect directly to the PIX device via traditional "telnet" (using PuTTY)functionality but can't seem to figure out why ISA is not allowing the ASDM...
I need to know how to block p2p applications using a pix firewall 525
I am using PIX version 6.0 and get the following error messages %PIX-1-103001: (Primary) No response from other firewall and %PIX-1-104002: (Primary) Switching to STNDBY
I have a IPSec tunnel From a ISA 2004 Server to a Cisco Pix. The Pix is sending TTl's which is dropping the tunnel. How can I set the ISA 2004 to respond to them so that the tunnel doesn't keep dropping out.
Hi, At work we have two private networks in different cities. The first network is 10.10.0.0/16 (A) and the other is 10.20.0.0/16 (B). They are connected with VPN using two cisco PIX. The VPN works as expected. Computers at network A can access those at network B and vice versa. The PIX located at...
Hi, I have a Cisco Pix which currently has an internal, dmz and outside interface. My outside is my default route, however I have now new separate connection (interface 4) that connects to the internet also that I would like to route some outside bound traffic through. As i understand it you can...
sir i have i 515R-R DMZ cisco firewall it need to configure vpn and block some site and protect the virus from the some http site.how i can configure it.
My Cisco ASDM Launcher used to work fine on my computer, now when i run the Cisco ASDM Launcher i got prompt as usual for user name and password, when i supply my username and password the launcher looks normal to the load the Cisco ASDM Launcher java appliaction as normal but it hangs at 47%, i...


