1
Cannot PING to outside Interface from PIX INSIDE interface
I set up cisco pix with inside network as interface INSIDE and OUTSIDE Network as OUTSIDE interface using nameif CMD. Assigned 192.168.1.0/24 for inside and 67.10.10.0/24 for OUTSIDE. Security level for inside was assigned 100 and outside default 0. APPLIED ACCESS-LIST icmp PERMIT ANY ANY TO OUTSIDE INTERFACE ON IN DIRECTION. bUT STILL CANNOT PING [...]
Answer Question
| March 31, 2012 4:21 PM
Cisco PIX, Cisco PIX 525, Cisco PIX Error Messages
I set up cisco pix with inside network as interface INSIDE and OUTSIDE Network as OUTSIDE interface using nameif CMD. Assigned 192.168.1.0/24 for inside and 67.10.10.0/24 for OUTSIDE. Security level for inside was assigned 100 and outside default 0. APPLIED ACCESS-LIST icmp PERMIT ANY ANY TO OUTSIDE INTERFACE ON IN DIRECTION. bUT STILL CANNOT PING [...]
Answer Question
| March 31, 2012 4:21 PM
Cisco PIX, Cisco PIX 525, Cisco PIX Error Messages
Cisco PIX firewall 6 error messages
I am using PIX version 6.0 and get the following error messages %PIX-1-103001: (Primary) No response from other firewall and %PIX-1-104002: (Primary) Switching to STNDBY
Answer Question
| November 20, 2008 9:51 PM
Cisco PIX, Cisco PIX Error Messages, Firewalls
I am using PIX version 6.0 and get the following error messages %PIX-1-103001: (Primary) No response from other firewall and %PIX-1-104002: (Primary) Switching to STNDBY
Answer Question
| November 20, 2008 9:51 PM
Cisco PIX, Cisco PIX Error Messages, Firewalls
1
