Cisco show command script
Hello. I want to implement a simple and easy to use script that would allow me to do a sequence of Cisco IOS commands. Can anyone help me? For example, if I want to sent a customer a script with the following commands but in a script so that they cannot change it. Thank you, [...]

Answer Question   |  March 28, 2011  12:51 PM
Cisco, Cisco IOS, Cisco IOS Commands, Scripting, Scripts

CISCO vty auto command
A user cannot use show running-config and config terminal using his default permission to my company router after he connects our edge router via telnet using port 23. I have to fix this problem without changing his privilege level. And I have to also solve this issue by using only a single command. any experts [...]

Answer Question   |  August 2, 2010  4:41 PM
Cisco IOS, Cisco IOS Commands, Cisco Routers, Routers, Telnet

What happened if I set ip unnumbered fa0/0 in my serial interface and later my fa0/0 went down?
My question is simple. what happened if I set ip unnumbered fa0/0 in my serial interface and later my fa0/0 goes down. if I establish ospf in that network which interface will proces the hello packet and which interface via send the hello packet ?. load balance ?

Answer Question   |  July 29, 2010  2:30 AM
CCIE, Cisco IOS, Cisco IOS Commands, OSPF

HSRP in cisco
I have L3 core switches, I want to configure HSRP for vlan 30, Please verify my configuration. My active router should be core 3 switch. Core swith 1 interface Vlan30  description ***Wireless Network Vlan***  ip address 192.168.21.252 255.255.254.0  no ip redirects  no ip unreachables  no ip proxy-arp  standby 30 ip 192.168.21.253  standby 30 priority 110 [...]

Answer Question   |  August 26, 2009  4:24 AM
Cisco IOS, Cisco IOS Commands, HSRP, L3 Switches, VLAN