i have two vlans configured into a juniper netscreen (a screenOS device). I have connected a catalyst to the nic i have configured the vlans on. I need an example configuration to shoot into the cisco to be able to ping both juniper vlan addresses from the cisco
Answer Question | February 16, 2011 12:25 PM
Cisco Catalyst, Cisco Catalyst 3550, Cisco VLAN, IOS Fundamentals, Juniper NetScreen-25, ScreenOS, VLAN
how can i split my banwidth per port with 3550 cisco?
Answer Question | March 23, 2010 9:15 AM
Bandwidth management, Catalyst Switches, Cisco 3550, Cisco Catalyst 3550, Switches
Hello IT managers, I’m faced with a challenging network set-up considering ISA 06 server, CISCO 1841 router, and Catalyst 3550 switch as key role players in the network. Anyone who could help me wth a valid and working configuration or advice. The scenario is: the ISA 06 will be facing the cloud with its external [...]
Answer Question | April 28, 2009 7:54 AM
Cisco 1841, Cisco Catalyst 3550, Firewalls, ISA Server, ISA Server 2006, Routers, VLAN, Vlans with ISA 06 server as firewall
Hello, I have a cisco switch 3550 EMI and I need to do rate limiting on ethernet ports. class-map match-all 5M description 5M with 500K burst ! policy-map 5M class 5M police 5120000 51200 exceed-action drop interface FastEthernet0/3 switchport access vlan 100 switchport mode dynamic desirable speed 100 duplex full service-policy input 5M service-policy output [...]
Answer Question | March 2, 2009 12:48 AM
Bandwidth limits, Bandwidth management, Cisco, Cisco 3550, Cisco Catalyst 3550, Cisco Catalyst 3550-EMI, Cisco switch configuration, Switch configuration, Switches
Hi, I am wondering if there is any failover (active- active or active-passive) solution for 3550 switches. I just would like to sync configurations of two 3550 as backup of each other. Thank you for your time in reading/responding my question. Emre.
Answer Question | November 15, 2008 9:08 AM
Cisco 3550, Cisco 3550 failover, Cisco Catalyst 3550, Cisco switches, Switches