• how to configure Cisco Voice Gateway?

    I want to connect ip phones.I have call manager and 2800 voice gate way.I know how to configure the call manager and all ready i did that but the problem is i dont know how to configure the voice gate way to route the voice throw the telephone line??

    Mohadbazzi47170 pointsBadges:
  • cisco call manager

    toll free numbers are not working in my ccm 4.1 how to configure route plan and pattern in ccm

    Ekansh400 pointsBadges:
  • Cisco Telphony enquiry abut call forwarding options

    Hi I am having a problem with calls forwarded to one user directly from the switchboard. this user now and again receives calles that are ment to go to a diffrent user. I have checked call manager and i have not seen any call forwarding options set in those directory numbers. Can anyone let me know...

    Labi5 pointsBadges:
  • Multiple Lines Forwarding (Callmanager 4.2)

    Hi there, Say I have a User Device Profile with 3 lines. Line 1: 666001 Line 2: 666002 Line 3: 666003 When someone dials 666001 and someone else dials 666002 a few seconds later, I want the person that dialed 666002 to be forwarded to the forward busy number this directory number 666002 has...

    Ghijzzer0920 pointsBadges:
  • Cisco Call Manager 4.1

    i have ccm 4.1, what happen any user transfer his call to his person number that call goes directly to his personal number, though i set "No Answer Call Duration to 20 or 30 Second"  I tried many way to troubleshoot this problem. Please help

    Ekansh400 pointsBadges:
  • CUCM 7 steps to integrate with OCS 2007 R2

    I need configuration steps for cisco call manager 7 which needs to be in place to be integrated with OCS 2007 R2

    ExchangeRocks5 pointsBadges:
  • increasing number of rings in Cisco Call Manager 6

    Cisco Call Manager 6 We need to set the default ring to at least 3 rings for the whole organization but we have to do it one by one where is the default set up at.

    ITKE352,415 pointsBadges:
  • Cisco call manager

    I am new in cisco call manager and there is many things to learn about this product, I want to know what is the main things and the common things I have to do to start with this product??

    Mohadbazzi47170 pointsBadges:
  • what call manager integration and cisco unity means??

    please I any one knows about cisco call manager intergation what its mean and cisco unity (general information)?  

    Mohadbazzi47170 pointsBadges:
  • Call Manager Overhead Paging using a 2610 Router

    Hi all, I need help to config a speedial number to dial a 2610 router I have setup for E/M signalling for overhead paging. Thanks

    Cisco56235 pointsBadges:
  • Cisco Call Manager ATA

    I am a LEC provider. I have a possible client that uses the Cisco Call Manager V2.4. I would like to run fax through the call manager using the Cisco VG248 ATA. I would like to use a PRI and assign DID’s. Can this be accomplished and will I realize any issues related to bandwidth and/or signaling?

    Jjacobs5 pointsBadges:
  • Cisco CallManager – controlled device profile

    Was wondering if anyone has experienced a similar event, or could offer any advice. We're running Cisco Call manager 4.2, all users are using extension mobility, most using a Cisco 7912. Occaisionally, when a user logs out of a phone (or as in the most recent occurance, the phone is reset following...

    Kalador5 pointsBadges:
  • Cisco Call Manager and Microsoft Active Directory

    We are able to search users but not contacts, is there any misconfiguration?

    Booga5 pointsBadges:
  • cisco 7961 phone loads

    on a cisco 7961 phone which tftp flash: ............. loads are needed to run on callmanager express on a cisco 3825 router?

    Spc5 pointsBadges:
  • cisco call manager Ethereal/Wireshark Captures

    Hi. Does someone has Ethereal/Wireshark captures of the signaling flows associated with the establishment of calls to/from CISCO Call-Manager to/from a SIP network. thanks

    Jakelino5 pointsBadges:
  • Call Manager 5.1 Timeout

    Using CM 5.1, when I dial a number from my 7960, 7961, or 7970, it times out really fast and goes to a fast busy. For example, if I dial 630-555-1212, but dial too slow, my call goes to a fast busy after a few seconds. Any ideas on how to increase this time to more like 15 seconds?

    Jimshoe12110 pointsBadges:
  • Display inbound caller ID on 2nd line appearance

    CCM 6.1 - Currently if a call is in progress on 1st line and a second call comes in, I can not see the caller ID of the second call that goes to the 2nd line appearance. For example Line 1 is in use and set to forward if line is busy. Second call comes in and goes to 2nd line as expected. Recieve...

    Sullida25 pointsBadges:
  • CallManager and SQL Queries

    I need to gather some data from our call manager and the reporting tool that comes packaged with the server is horrible! We have Call Manager version 6.1. Is there anyway query the call detail records other then using the reporting tool? If so, please advise me. Thanks

    Jlandon5 pointsBadges:
  • Getting proper caller ID to display while using a combination of Avaya S8700 with outbound ISDN trunks, connected to a Cisco Call Manager via Qsig PRI

    While making a call originating from the Cisco Call Manager, I can only make the main number of the Avaya PBX display, not the direct number of the station on the Cisco Call manager, how do I make the direct number display?

    CrowleyCisco5 pointsBadges:
  • CONFLIST for Meet-Me

    I have Cisco CM 7.1. Meet-Me bridge and ad-hoc conferences work fine. CONFLIST softkey works properly in ad-hoc, but does nothing in Meet-Me. What parameter(s) should I check ?

    Khowarddmns5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following