• CISCO Call Manager

    We have recently purchased a ISR 3825 loaded with Call Manager. We are able to access the SDM via a laptop but cannot access the Call Manager software. The router wasn't supplied with any software or details of how to access Call Manager, does anybody have any ideas?

    Blue895 pointsBadges:
  • change extension four digit a five digit in Cisco Call Manager

    how to change extension the 4 digit a 5 digit i need the change five hundred extension

    Narvas5 pointsBadges:
  • International Calls

    How to make absolutely sure that a cisco Iphone 9971 is able to receive international calls within Cisco Unified CM Administration System version: 7.1.5.30000-1. The user has his 9971 linked with his iphone, and the international call from Scotland goes straight to his cell phone's voicemail....

    flyingson5 pointsBadges:
  • Need help with CallManager configuration

    I need your help for Cisco CallManager express. Hi! l have two sites connected via leased line. On main site (site A ) l have a 2800 series router with CallManager express , one Cisco 2960 switch and few Cisco IP iPhone (SPA 525 G2). What l want now is to deploy 2 IP iphones on the second site...

    kingelka5 pointsBadges:
  • Cisco Call Manager services issue

    Hi, I have one issue with Cisco Call Manager 4.1. my old registered IP phones are working fine, but when I register any new phone, the phone is not receiving Service URL, Messages URL, Directories URL. When I check conf file on call manager it's contains all URLs, but in IP phone network settings...

    Chetanm145 pointsBadges:
  • CCM on 2600xm ?

    I have a 2611xm and a 2620xm and 2 - 7942 IP Phones - Can I install Cisco Call Manager and make one ring the other? How? Which IOS do I need and can you set me in the right direction? I have never installed CCM before... Thanks in advance.

    CCMNewbie5 pointsBadges:
  • How to Setup the ATA 186 as a SIP Device with Call Manager 7?

    I would like to use the Cisco ATA 186 as a SIP device with Cisco Call Manager 7. However, I have found that the SIP firmware for the Cisco ATA 186 is unsupported by Call Manager 7. Therefore, In order to use the ATA as a SIP device with the Call Manager, I believe I will need setup the ATA as a 3rd...

    leymane5 pointsBadges:
  • Cisco Call Manager CSS

    Hi, I'm a beginner with Call Manager 7 and need some help. this is a Hotel in Spain. The Director wants to block all the rooms extensions. when the reception makes the customer check in, I have to change the CSS (calling search space) on the Directory number. CSS Block to CSS Allow. So they can...

    Absolutt5 pointsBadges:
  • Cisco Callmanager 3.3 Reporting Question

    I'm trying to automate a report that I can manually run in Callmanager in the CDR Analysis & reporting tool. I'd like to automate the QoS Detail report to run weekly or monthly and email itself to a specific person. I'm OK with a 3rd party tool running the report on my windows 2000 server if...

    Robbzilla5 pointsBadges:
  • what if a user can make calls but can not receive?

    what could be the reason that a user is receving calls successfully but can not receive calls? I think it could be releated to Calling search space;but don't know the exact answer. if any body can please explain

    OneTwoThree1235 pointsBadges:
  • How does IP phone contact DHCP

    hi all in callmanager express we configure callmanager as a dhcp.now my question is do we need to put iip address in ip helper-address command of callmanager express i.e default route or what. regards sandeep

    Sandyrana5 pointsBadges:
  • where is the Pause in Cisco????

    Hello Friends Anyone can share with me there idea’s of Route Pattern for speed dial????????? A. Usually in Cisco Unified Call Manager Speed dial number its working perfect, everyone knows this Pattern is 9.8XXXXXXXXX Speed Dial and Abbreviated Dial Configuration Speed setting 1. 98001245444...

    Taher10 pointsBadges:
  • Audio Codes (MP114 SIP) with Cisco call manager

    I have CCM 6.0 and have audio codes box, When i make an out going call from AC box it is working smooth but when i want to make an incoming call on AC box from an IP phone i m getting fast busy...were as call from ac box to IP phone is fine... PLease help

    Rajesh03padwal5 pointsBadges:
  • Call Divert to Mobile for non UCCM User using Cisco Voice Gateway

    Hi, I have a requirement for a DDI number to be on permanent divert to a mobile.  The user does not have a account on the call manager, nor does he need one.  I just need to provide a Land-line number so it can divert to his mobile.  What is the best way for me to achieve this with the lease...

    KiNNik5 pointsBadges:
  • Internet Explorer Add-on for Call Manager

    Is there an Internet Explorer Add-on for Call Manager? I would like to install something similiar to Skype that would recongnize phone number's that you can click on and it will call using the Cisco IP Phone.

    Jlandreneau5 pointsBadges:
  • How to configure PAGING on CM?

    I am having CUCMBE, 7828-i4 unified call manager bus edition WL 7.0 and i want to configure paging on my CM so I can broadcast a message to all users at a time. is there any possibility ??? please send a copy of your reply on kraheelw@hotmail.com Thank you and best regards.

    Kraheelw5 pointsBadges:
  • Participation control in Meet Me Conference

    dear all, i have cisco call manager 7.0 and cisco unity express integrated with it how can i know my participates in meet me conference and how can i accept or remove some participate from conference ? thanks in advance

    Makashik5 pointsBadges:
  • How to access Cisco CME when GUI has died?

    Silly me: Guess who put double quotes around extension/label name for phone, hit save changes, and now the Cisco CME GUI does not come up... I imagine a Telnet session is required, but not sure where to start. Not sure also what version CME it is. Using 7940 series phones. Any advice for someone...

    AndyPA15 pointsBadges:
  • how to configure Cisco Voice Gateway?

    I want to connect ip phones.I have call manager and 2800 voice gate way.I know how to configure the call manager and all ready i did that but the problem is i dont know how to configure the voice gate way to route the voice throw the telephone line??

    Mohadbazzi47170 pointsBadges:
  • cisco call manager

    toll free numbers are not working in my ccm 4.1 how to configure route plan and pattern in ccm

    Ekansh400 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following