• Cisco ASA Upgrade

    Hi, I'm about to download the latest cisco asa s/ware (8.4.).I'm a bit concerned about installing it as I've heard there are NAT problems when it replaces the old version. Anyone any advice? PT

    Pelvicthrust170 pointsBadges:
  • ASA5510 are interface ports assigned to specific functions

    Having trouble getting traffic through my test config of 5510. Using ASDM, any to any ACL, no NAT, 2 client subnets, 1 DMZ and remaining port for outside. Seem to get different results for ports, some one way traffic, some full duplex, others none at all. Whats going on? Either traffic is port...

    Stefmakus5 pointsBadges:
  • Cisco ASA and GNS3

    Cisco ASA not able to ping interfaces in GNS 3

    Ekansh400 pointsBadges:
  • Cisco 2921 router

    we are deploying the cisco 2921 router at the branches of our organization. branch here consists of about 10 pple and the mostly do alot of replications and remittances of data and send such traffic acros the wan. what type of perimeter protection can be used for such a network as the ASA 5510 is a...

    Djsizzle15 pointsBadges:
  • How to open FTP port 21 on cisco ASA 5520 using ASDM , Source IP – x.x.x.x , Destination IP – y.y.y.y

    Hi,I have a very basic question on ASA. Using ASDM, how can I open port 21 from IP - x.x.x.x to y.y.y.y

    A4avani15 pointsBadges:
  • Connect a Nexus 7000 to 6500

    We have two 6500(6509) that is the core of our network. The 6500 Supervisors are EOS/EOL and no longer will it be under SmartNet at the end of the year. We have purchased one Nexus 7010 with two Supervisors. I would like to move all the services to the 7010 from the 6500 and have the 6500 working...

    Jstevens15 pointsBadges:
  • rSyslog in Ubuntu 11.4

    I have enabled rsyslog on Ubuntu and have my firewall logs going to this system.  They are landing in the syslog file and I want them to go to a unique file such as /var/log/firewall.log.  I have entered the following line in the rsyslog.conf file, but it doesn't seem to have any affect. if...

    Kevin28365 pointsBadges:
  • How to log VPN account in ASA 5510?

    How would you go about logging a specific user account that connects via VPN? I've been asked to see if someone is logging into their VPN when they say they are.

    Robert2010465 pointsBadges:
  • Cisco ASA Anyconnect Setup

    We are trying to connect HTC Touch Pro 2 devices to the VPN which is Cisco ASA.  I am getting the following error on the device: The Anyconnect package on the secure gateway could not be located.  You may be experiencing network connectivity issues.  

    Miselw5 pointsBadges:
  • Cisco VPN mapped drives issues

    Hello all, I have a weird issue with my company's VPN. we are using cisco vpn via ASA firewall. When people login into VPN and want to browse our main shared drive, some of then get not a full list of folders. This issue seems to be with more or less the same group of people, but I am not convinced...

    Mariulia185 pointsBadges:
  • Maximum network protection with public Internet access

    What is the best way to give public access to the internet yet protecting my company network?  We have a Cisco ASA 5510 firewall and wireless access points.

    Rpc5 pointsBadges:
  • How to make this DMZ routing work?

    Currently we have the DMZ ACL in the ASA firewall. One interface that was assigned as DMZ was connected to the core switch and within a VLAN. The server that was untagged to this DMZ VLAN will have the DMZ ACL applied to the inbound/outbound traffic.  This was quite simple setup.  This issue now...

    springman95 pointsBadges:
  • Checking when PIX/ASA rules were accessed on a PIX 515e

    I'm a recent hire, and now I've been asked to clean up our PIX/ASA rules. Aside from the show access-list, is there a command  that can help me determine the last time the rule was accessed? Any other tips when cleaning up rule clutter?

    ITKE352,565 pointsBadges:
  • 3G – Creating a S2S VPN when the 3G card uses DHCP and not static?

    I have a 3G WIC card (HWIC-3G-GSM) in a Cisco 1841 and need to create an IPSEC tunnel to a Cisco ASA5520 Normally creating a S2S tunnel would be relatively easy if both peers used static IP's, however my 3G provider uses dynamic addressing. If I try and create an IPSEC S2S VPN peer on a...

    OrangeNewbie55 pointsBadges:
  • DMZ Setup with Cisco ASA 5510 and 2 VPN peers

    I have an Cisco ASA with one external IP address, and 2 VPN Peers. Now i need to add a web server to the mix. Please tell me how can i accomplish this bearing in mind my existing setup? Thanks,

    Zaggazow25 pointsBadges:
  • How to configure ASA 5510 with dynamic IP address

    I want to configure the Cisco ASA 5510 with my ADSL connection. Adsl conection getting the dynamic IP address from ISP so how can i configure the ASA so i can use site to site connection and vpn client. On site also having ASA 5505 and pix 506 with ADSL connection. Office user also wants to connect...

    Cicso5 pointsBadges:
  • Cisco ASA 5540 problem

    I am facing som problem in ASA 5540. My Problem is that [strong]particular one DNZ zone IP is no pinging from LAN[/strong] [strong]zone[/strong] at approximate ½ an hour. But in this time any DMZ IP is ping that IP. This problem is happen on daily basis. Please help me.

    Asishgupta75 pointsBadges:
  • Cisco ASA 5505 locking up

    What could be the cause of 5 of my Cisco ASA 5505 to lock up. During this time Internet is blocked, you can't ping it. Once you reload the asa via console cable or powercycle, connectivity is restore. They have the latest IOS and ASA software. They all have static ips and connected to Cisco...

    TeflonJack5 pointsBadges:
  • How to setup 2 ASA 5520 as failover

    My Objectives: 1. INSIDE can access OFFICE (mail,  application, dns) and INTERNET 2. DMZ can communicate with OFFICE and INTERNET 3. INSIDE and DMZ can access each other 4. OFFICE can access DMZ especially http 5. OFFICE can access INSIDE's web . thank  you ,

    Papadockjj25 pointsBadges:
  • FOG, DHCP from a Cisco 5510 ASA

    Hey, I am trying to set up fog to be able to image computers on my network. We previously had it set up working properly through a dedicated windows DHCP server, but recently we implemented changes and are now providing DHCP through a cisco 5510 ASA. It was working by itself without any...

    Tlarz5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following