• Cisco 5510 firewall configuration

    How do I configure Cisco firewall 5510 ASA?

    Van helsing60 pointsBadges:
  • edge server setup with ISA 2006

    I am wondering if anyone can give me some advise on setting up an edge server with a ISA 2006 server. We have a cisco ASA firewall that we currently use for internet access. I am looking for advise on setting up a perimeter network for the edge server using the ASA and the ISA server. We are...

    Scorpio 075 pointsBadges:
  • I am under a ddos attack and need to block country

    I have Cisco ASA Hardware Firewall and O don't see how to block either a bunch of IP addresses (thousands) or deny access to a whole country. Is it possible? Adding one IP at a time is not an option. Thanks

    Greycheetah5 pointsBadges:
  • How to backup and restore Cisco ASA 5505

    I need to backup the configuration of a Cisco ASA 5505 and restore to spare unit.

    Trl5 pointsBadges:
  • Cisco ASA Virtual Image

    Hi, I need to do some testing and am looking for a virtual image for Cisco ASA? Any ideas? Thanks in advance Raj

    TheITProjectBlog550 pointsBadges:
  • Using iPad 2 to Remote Desktop

    Has anyone tried getting an iPad 2 to do remote desktop on a Windows XP pc, through a Cisco Pix (ver.6) router? I know Cisco doesn't have an iPad client for the Pix because it's not ASA.

    JZDoug5 pointsBadges:
  • ASA VPN Technologies

    Need help in designing a network There are three sites in question. Site A and Site B has been connected via MPLS. Site C will be connected to Site A using IPSEC technologies.I need help in the following:-One Application in Site C connecting to Server in Site B via Site A - which VPN technology to...

    Ultima5 pointsBadges:
  • Free IT Book: The Accidental Administrator: Cisco ASA Security Appliance

    This week's free IT book comes with a bonus interview with the author, Don Crawley! Check out what he has to say about the book, the process, and the joys of being an IT-type personality. Then answer one of the questions below and post the link to your answer in the discussion section for your...

    MelanieYarbrough6,345 pointsBadges:
  • VPN configuration

    Dear members, I have a Cisco ASA 5520 firewall. I want connected to another location for VPN. The another end have only for Jupiter ns-25 devise. Its possible to connect VPN. What is the iOS that will be required for both end? What are the authentication and encryption methods will be support?...

    Franklinlobo5 pointsBadges:
  • Login user and password for a new Cisco ASA 5505 router

    What is the login user name and password for a new Cisco ASA 5505 router?

    Tom6755 pointsBadges:
  • Firewall ports for shared drive access

    Which ASA firewall ports have to be opened for shared drive access?

    desertdawg5 pointsBadges:
  • Merge two ASA 5510′s into one

    We currently have two ASA 5510's in our environment. One is serving up the VPN endpoint and the other one is the VPN ACL. I needs some assistance in how to merge the two devices together.

    wolfdog5 pointsBadges:
  • cisco ASA 5510′s setup two firewalls, one for VPN only the other for VPN tunnel and internet

    I have a question that I have been working and can not seem to figure out. I have 2 ASA 5510's. Both have Internet service's from two different providers. On one I want to use for VPN access for remote users to connect through, the other I have a VPN tunnel built and I want to have the corporate...

    Skeletor6830 pointsBadges:
  • Cisco ASA 5520

    I have a Cisco ASA 5520 as my firewall and a proxy server. I want all users to access internet via proxy server but some users change their gateway to Cisco ASA and access web without being filtered. How can I block these users to use proxy server only?

    Momin5 pointsBadges:
  • Event log on Cisco ASA 5500

    Having issue configuring logging on my ASA 5500.  Just want to log error messages and warnings.  Have tried logging configuration commands below with no luck.  Is there a command I may be overlooking? [strong]logging enable[/strong] [strong]logging buffered[/strong] 4 logging-buffer size (#)

    Sgtosiris20 pointsBadges:
  • ASA Implementations

    Hi, I need to implement ASA Firewall in my network and current network topology is Router------Switch-----Servers. what should be best topology to implement the firewall. Please let me know i never configured firwall.

    ICND15 pointsBadges:
  • Point-to-Point VPN through a NATed ADSL Modem

    Greetings, I am trying to setup a Point-to-point vpn tunnel using the Cisco Pix ASA. Here is the scenario: One location got a ASA connected to a Cable modem which assigns its Public IP (static) address directly to the ASA. On the other Location the other ASA is connected to an ADSL Modem which do...

    Fusionex20 pointsBadges:
  • Configuring SSH in Cisco ASA 5520

    how i can configure ssh in cisco ASA 5520?

    44225 pointsBadges:
  • Cisco ASA Upgrade

    Hi, I'm about to download the latest cisco asa s/ware (8.4.).I'm a bit concerned about installing it as I've heard there are NAT problems when it replaces the old version. Anyone any advice? PT

    Pelvicthrust170 pointsBadges:
  • ASA5510 are interface ports assigned to specific functions

    Having trouble getting traffic through my test config of 5510. Using ASDM, any to any ACL, no NAT, 2 client subnets, 1 DMZ and remaining port for outside. Seem to get different results for ports, some one way traffic, some full duplex, others none at all. Whats going on? Either traffic is port...

    Stefmakus5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following