Cisco 2960

VLAN routing Cisco 2960

I have 2 VLAN  VLAN and VLAN2  in a 2960 cisco switch .I need to route betwwen VLANS .Here is my question  can I use a AASTARO firewall to route this ? or do I need cisco router? VLAN protocol is 802.1q Thanks     Software/Hardware used: 2960 cisco switch

Can't connect D-Link media converter with Cisco switch 2950

I am using Cisco switch 2950 connected with a D-Link media converter. When power is reset, that switch is up but the port connected with the media converter is down. After I reset power of the media converter, the link comes up. What's going on here, and how can I fix this? Software/Hardware...

VLANS and cisco 2960 switch

VLANS and cisco 2960 I have a new cisco 2960 switch gig 0/1 connecting to a 3560 on gig0/9. the problems is my vlans will not come up. I have configured another switch the same exact way and it works fine. The only line in the commands of bith switches that is different is ip http secure-server. ...

comparacion entre switches 2950 y 2960

Necesito saber dado a algunas recomendaciones que me han llegado ¿que ganaria pasando de un switch 2950 a un 2960? administra mejor las vlans??es mas rapido??etc agradeceria sus comentarios y opiniones personales hacerca de los aparatos ***************************** I need to know given to some...

Configuration between L3 switch 3750 and L2 switch 2960 via trunk port

I am going to connect three L2 switches 2960 from L3 Switch 3750, means all three L2 switches are connected to L3 switch via trunk switch. Thanks & Regards, And i am going to configure VLANs on L3 Switch. So plz let me suggest,if both switches are in server mode then i should configure VLAN on L3...

Cisco 2960 link aggregation with Foundry

How do i setup a 2960 link-aggregate with Foundry?

How can I disable browsing from my 2960 switch?

Can I disable browsing option on my 2960 switch for protecting from some users. What command I can use for this?

Cisco 2960 & Cisco Linksys SRW 2024

What is the difference between Cisco 2960 Switch and Cisco Linksys SRW2024?

Switch IOS Recovery

How to recover switch IOS of Cisco 2960.

Channeling Problems Cisco 2960 switches

While trying to channel two cisco 2960 switches there tends to be a network problem...everything goes down. Could this be the way the switches configurations were set up?

cisco-IOS

In my office campus there are more then 500 cisco-2960 and 3750 switches present. I want to keep one TFTP server in our datacenter loaded with all the switches IOS in it, So that if any of the switch's IOS in campus get corrupt due to some reason, It should boot from the IOS kept on the TFTP...