1
  • Cisco IOS image support for BGP

    Which Cisco IOS image support BGP configuration?

    Pswaray15 pointsBadges:
  • I want a autofallback of link from BGP to OSPF

    Hi , I have a cisco 1841 router connected to 2 different isp & running 2 different protocol (ospf & bgp). I want to use ospf link as a primary & auto switch to bgp link in case of pri link failure. I have added static route to make ospf link pri  & it works but unable to auto...

    Chandrakant5 pointsBadges:
  • Troubleshooting EGP and BGP

    How do I troubleshoot exterior gateway protocol (EGP) and border gateway protocal (BGP)?

    Solomon007bawa15 pointsBadges:
  • Able to ping L3 VPN but unable to tracepath

    I am running an L3 VPN between 2 edge routers and have connected one router to a client (Linux Host). I tried pinging from the client an IP address (present on the other router) that was learnt via BGP VPN. It's pinging, but I am unable to do tracepath from the client. It gives me a "No Reply"...

    SearchEnterpriseWAN1,080 pointsBadges:
  • BGP with 2 ISP with advertisement different LAN pool

    I have BGP with 2 ISP's. Now I want my own half live IP pools to be advertised from one ISP and other live IP POOL from second ISP. How do I do it with Cisco 2811? I have done normal setup for BGP and it's working , but all live IP POOL are announcing from only ONE ISP and the other ISP link is...

    noc12315 pointsBadges:
  • Border Gateway Protocol (BGP) Pro’s and Con’s

    Hello to everyone reading, This subject has been brought sever times, but its all outdated and i decided to give it a 2012 go :) As ISP needs to interconect to backbones with other AS and besides RIPE, having a BGP session seem a good way to route IGPs. I know it a hard and long process, as setting...

    SpawnY5 pointsBadges:
  • VLSM routing protocols

    which routing protocols support VLSM

    Libby5 pointsBadges:
  • cisco 3825 router bgp

    what IOS requirement to configure BGP on cisco 3825 router

    Arieb5 pointsBadges:
  • VPN Tunnel Configuration in Router uses BGP Routing Protocol

    How to create VPN Tunnel in Router which uses BGP as Routing Protocol and the client side Router also using BGP as Routing Protocol. Please guide me in this.

    Ajsdaj5 pointsBadges:
  • BGP not active, IP routing not enabled

    while trying to configure IP/VPN on cisco 877(ios new 12.4) , entered ..router bgp 65272..getting a error message...ip routing not enabled....so tried #sh bgp...geting ...% bgp not active....If any one have the solution.please tell me the solution...advance thanks

    Fasicp5 pointsBadges:
  • what IOS requirement to configure BGP on cisco router

    Does Cisco 1841, 3845,1721 ,1750 Router support BGP or not? If yes, then which minimum IOS with version is required to support this?

    Sathya130319745 pointsBadges:
  • BGP over IPv6 network

    BGP-4 typically carries network reachability information between routers across IPv4 networks.  If it's routing betwen IPv6 networks it uses the multiprotocol extensions for BGP-4.  But the assumption is that the network that BGP rides over is an IPv4 network.  What if the network BGP rides...

    Grreat5 pointsBadges:
  • NAT without BGP

    My customer has an 1841 router. FE0/0 connects to his LAN. FE0/1 connects to another ISP, call ISP-A, 2M internet link. He want another 2M from u, ISP-B with load balancing. Can we use same 1841 router with V.35 interface connection and load sharing internet traffic for both ISP-A & ISP-B. Cutomer...

    ITKE350,310 pointsBadges:
  • BGP setting in Cisco 2811 router

    how to configure bgp in cisco 2811

    Alerese5 pointsBadges:
  • Connect Cisco 2800 to 2 ISPs, and internal networks through switch module.

    Greetings.. I am considering what equipment I need for my project. I have to load balance between two connections to the same ISP. The question I have is simply, if I can use a Cisco 2811 router, using the fa0/0 - 1 to connect to the ISP and use the internal switch module for my networks ? I have...

    Netsmurf5 pointsBadges:
  • BGP Pro’s and Con’s

    I am interested in implementing BGP but our company wants to know the disadvantages and the advantages of Border Gateway Protocol before we go that route.

    Whoareyou885 pointsBadges:
  • MPLS connectivity question

    One site of our MPLS connections is down. When I do a traceroute to that site. I can see the packets bouncing back and forth between our router and the service provider's router. I haven't been able to contact the IT guys in the other site, so I'm trying to figure out what's happening from my side....

    mshen27,385 pointsBadges:
  • How MPLS would work for Enterprise not using EGP?

    How MPLS would for work Enterprise not using EGP(BGP), would't then it be fair to say that as long as you dont have LSR in your network , you still using good old frame-relay, PPP to connect your back bone router to ISP LSR where labling will begin?

    Khurramm30 pointsBadges:
  • About routing protocol

    Hi Engineers my name is vinod, i would like to no routing protocols ,like how rip,igrp,eigrp,ospf and bgp works and what is advantage and disadvantage of this protocols, specifically what is route poisening. i will appreciate for any kind of answer and any attachment or links will also help me....

    Hacky5 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following