Setting Up VLAN across WAN link for Testing
I am trying to setup a Vlan via a WAN Link. Local End has already 4 VLANs. Remote End doesn’t. Remote end needs to access VLAN id 4 via the WAN link. Local Gateway router = Cisco 3660 Remote Gateway Router = Cisco 3660 Local Switch = Cisco 3750 Remote Switch = Cisco 2924 What [...]
Answer Question
| December 5, 2005 12:21 AM
Availability, Bandwidth, Cabling, Cisco, Hardware, Hubs, IPv4, Network monitoring, Network protocols, Networking, Performance management, Ping, Routers, Switches, TCP
I am trying to setup a Vlan via a WAN Link. Local End has already 4 VLANs. Remote End doesn’t. Remote end needs to access VLAN id 4 via the WAN link. Local Gateway router = Cisco 3660 Remote Gateway Router = Cisco 3660 Local Switch = Cisco 3750 Remote Switch = Cisco 2924 What [...]
Answer Question
| December 5, 2005 12:21 AM
Availability, Bandwidth, Cabling, Cisco, Hardware, Hubs, IPv4, Network monitoring, Network protocols, Networking, Performance management, Ping, Routers, Switches, TCP
AOL Spammer IP Identification
Concerning the ever increasing amount of received spam, to battle this I have a program with which I can extract the IP address from the sender for reporting purposes, however, I have been receiving an increasing amount from AOL proxy server for which I cannot aquire the senders IP address. Is there another way I [...]
Answer Question
| November 20, 2005 11:56 AM
Access control, Active Directory, Application security, Availability, backdoors, Bandwidth, Bind, Biometrics, Browsers, Cabling, Compliance, configuration, CRM, Current threats, Database, DataCenter, Development, DHCP, Digital certificates, Disaster Recovery, DNS, Encryption, Exchange, filtering, Firewalls, Forensics, General Directories, Hacking, Hardware, Hubs, human factors, Identity & Access Management, Incident response, Instant Messaging, Interoperability, Intrusion management, Lotus Domino, Microsoft Windows, Network applications management, Network management software, Network monitoring, Network security, Network testing, Networking, Networking services, patching, PEN testing, Performance management, Ping, Platform Security, Policies, Protocol analysis, provisioning, Remote management, Risk management, Routers, Secure Coding, Security, Security Program Management, Security tokens, Servers, Single sign-on, Software, Spyware, SSL/TLS, Switches, Tech support, Trojans, Viruses, VPN, vulnerability management, Web security, Wireless, worms
Concerning the ever increasing amount of received spam, to battle this I have a program with which I can extract the IP address from the sender for reporting purposes, however, I have been receiving an increasing amount from AOL proxy server for which I cannot aquire the senders IP address. Is there another way I [...]
Answer Question
| November 20, 2005 11:56 AM
Access control, Active Directory, Application security, Availability, backdoors, Bandwidth, Bind, Biometrics, Browsers, Cabling, Compliance, configuration, CRM, Current threats, Database, DataCenter, Development, DHCP, Digital certificates, Disaster Recovery, DNS, Encryption, Exchange, filtering, Firewalls, Forensics, General Directories, Hacking, Hardware, Hubs, human factors, Identity & Access Management, Incident response, Instant Messaging, Interoperability, Intrusion management, Lotus Domino, Microsoft Windows, Network applications management, Network management software, Network monitoring, Network security, Network testing, Networking, Networking services, patching, PEN testing, Performance management, Ping, Platform Security, Policies, Protocol analysis, provisioning, Remote management, Risk management, Routers, Secure Coding, Security, Security Program Management, Security tokens, Servers, Single sign-on, Software, Spyware, SSL/TLS, Switches, Tech support, Trojans, Viruses, VPN, vulnerability management, Web security, Wireless, worms
Stop bit problem: USB to Serial Converter attached to motion controller, unable to set for 7-E-2
I have three different USB to Serial converters, one of them an isolated converter from B&B. One brand of motion controller I work on uses EVEN parity / 7 data bits / 2 stop bits as its default. I find that none of my converters will work on the controller in this configuration. If I [...]
Answer Question
| November 22, 2005 5:36 PM
3Com, Active Directory, ActiveX, Administration, Apache, Automated, Availability, BASIC, Benchmarking, Business Objects, C, Cabling, Cape Clear Cape Connect, Career development, Cisco, Clustering, Cognos, Crystal Reports, Data analysis, Data Junction, Data management and storage, Data mining/analysis, Data warehousing applications, Database, DataCenter, DB2, Dell, Desktop management applications, Desktops, Development, DHCP, Distribution/logistics applications, DNS, Enterprise Desktop, Ethernet, Fault isolation, Fax and print management, FDDI, File, Frame Relay, Functional, H.323, Hardware, Hardware selection and management, Hewlett-Packard, Hewlett-Packard Application Server, Hubs, Hyperion, IBM, Informatica, Information Builders, Interoperability, Lifecycle development, Linux, Lotus Domino, Management, Manufacturing applications, Microprocessors, Microsoft Systems Management Server, Microsoft Windows, Migrations and upgrades, Monitoring, NCR, NCR/Teradata, Network applications management, Network connectivity, Network management software, Network monitoring, Network protocols, Network testing, Networking, Networking services, NIC, Novell IPX/SPX, Oracle, OS, Performance and availability, Performance management, Performance/Load, Ping, Power management, Printers, Programming Languages, Protocol analysis, Remote management, Routers, SAP, SAS Institute, Security, Servers, Software, Software testing, Software testing tools, SPSS, SQL Server, standards, Storage, Switches, Systems management software, TCP, Tech support, Thermal controls
I have three different USB to Serial converters, one of them an isolated converter from B&B. One brand of motion controller I work on uses EVEN parity / 7 data bits / 2 stop bits as its default. I find that none of my converters will work on the controller in this configuration. If I [...]
Answer Question
| November 22, 2005 5:36 PM
3Com, Active Directory, ActiveX, Administration, Apache, Automated, Availability, BASIC, Benchmarking, Business Objects, C, Cabling, Cape Clear Cape Connect, Career development, Cisco, Clustering, Cognos, Crystal Reports, Data analysis, Data Junction, Data management and storage, Data mining/analysis, Data warehousing applications, Database, DataCenter, DB2, Dell, Desktop management applications, Desktops, Development, DHCP, Distribution/logistics applications, DNS, Enterprise Desktop, Ethernet, Fault isolation, Fax and print management, FDDI, File, Frame Relay, Functional, H.323, Hardware, Hardware selection and management, Hewlett-Packard, Hewlett-Packard Application Server, Hubs, Hyperion, IBM, Informatica, Information Builders, Interoperability, Lifecycle development, Linux, Lotus Domino, Management, Manufacturing applications, Microprocessors, Microsoft Systems Management Server, Microsoft Windows, Migrations and upgrades, Monitoring, NCR, NCR/Teradata, Network applications management, Network connectivity, Network management software, Network monitoring, Network protocols, Network testing, Networking, Networking services, NIC, Novell IPX/SPX, Oracle, OS, Performance and availability, Performance management, Performance/Load, Ping, Power management, Printers, Programming Languages, Protocol analysis, Remote management, Routers, SAP, SAS Institute, Security, Servers, Software, Software testing, Software testing tools, SPSS, SQL Server, standards, Storage, Switches, Systems management software, TCP, Tech support, Thermal controls
Upgrade step from win nt and win 2000 to win 2003
I have windowsNT and window 2000 servers with active directory which i want to upgrade to windows 2003,all servers meet requirement for new vesion.Now can same help me on how to upgrade?what steps should i take
Answer Question
| November 14, 2005 2:16 AM
3Com, Access, Active Directory, Apache, ATG Dynamo, Availability, Avaya, Bandwidth, BEA WebLogic, Billing and customer care, Billing Support Systems, Bind, BlackBerry, Cabling, Cape Clear Cape Connect, Career development, Certifications, Cisco, DataCenter, Desktops, Development, DHCP, DNS, Ethernet, FDDI, Frame Relay, General Directories, H.323, Handheld, Hardware, Hewlett-Packard Application Server, Hubs, IPv4, IPv6, LDAP, Lotus Domino, Management, Microprocessors, Microsoft .NET, Microsoft Office, Microsoft Windows, MPLS, NetBIOS, Network monitoring, Network protocols, Networking, Networking services, NFS, NIC, Novell IPX/SPX, Novell NDS, OS, Palm OS, Patch management, Performance management, Ping, Printers, Routers, Security, Servers, SIP, SQL Server, Switches, Symbian, TCP, Training, Windows Mobile, WINS
I have windowsNT and window 2000 servers with active directory which i want to upgrade to windows 2003,all servers meet requirement for new vesion.Now can same help me on how to upgrade?what steps should i take
Answer Question
| November 14, 2005 2:16 AM
3Com, Access, Active Directory, Apache, ATG Dynamo, Availability, Avaya, Bandwidth, BEA WebLogic, Billing and customer care, Billing Support Systems, Bind, BlackBerry, Cabling, Cape Clear Cape Connect, Career development, Certifications, Cisco, DataCenter, Desktops, Development, DHCP, DNS, Ethernet, FDDI, Frame Relay, General Directories, H.323, Handheld, Hardware, Hewlett-Packard Application Server, Hubs, IPv4, IPv6, LDAP, Lotus Domino, Management, Microprocessors, Microsoft .NET, Microsoft Office, Microsoft Windows, MPLS, NetBIOS, Network monitoring, Network protocols, Networking, Networking services, NFS, NIC, Novell IPX/SPX, Novell NDS, OS, Palm OS, Patch management, Performance management, Ping, Printers, Routers, Security, Servers, SIP, SQL Server, Switches, Symbian, TCP, Training, Windows Mobile, WINS
SPAM
I am running Exchange 2003 and Win2k3 servers. we get a ton of spam, and I want to stop it. What in your opinion are the best SPAM softwares and why? (such as strong points and weak points) let’s hear it….
Answer Question
| November 21, 2005 11:11 AM
AIM, Application security, Availability, backdoors, Bandwidth, Budgeting, Compliance, CRM, Current threats, Database, DataCenter, Desktops, Development, Disaster Recovery, Encryption, Exchange, Exchange security, Firewalls, Forensics, Hacking, Hardware, human factors, Incident response, Instant Messaging, Intrusion management, Management, Microsoft Windows, Network monitoring, Network security, Networking, OS, Patch management, Performance management, Policies, Risk management, Secure Coding, Security, Security Program Management, Servers, Spyware, SQL Server, Trojans, Viruses, VPN, Wireless, worms
I am running Exchange 2003 and Win2k3 servers. we get a ton of spam, and I want to stop it. What in your opinion are the best SPAM softwares and why? (such as strong points and weak points) let’s hear it….
Answer Question
| November 21, 2005 11:11 AM
AIM, Application security, Availability, backdoors, Bandwidth, Budgeting, Compliance, CRM, Current threats, Database, DataCenter, Desktops, Development, Disaster Recovery, Encryption, Exchange, Exchange security, Firewalls, Forensics, Hacking, Hardware, human factors, Incident response, Instant Messaging, Intrusion management, Management, Microsoft Windows, Network monitoring, Network security, Networking, OS, Patch management, Performance management, Policies, Risk management, Secure Coding, Security, Security Program Management, Servers, Spyware, SQL Server, Trojans, Viruses, VPN, Wireless, worms
layer 2 & layer 3 switch
Hi All, what is the basic difference between layer 2 & layer 3 switch. how can configure layer 2 & layer3 managable switch
Answer Question
| November 10, 2005 6:50 AM
Access control, Application security, Availability, backdoors, Bandwidth, Biometrics, Browsers, Cabling, Cisco, Compliance, configuration, CRM, Current threats, Database, Digital certificates, Disaster Recovery, E-business, Encryption, Exchange, Exchange security, filtering, Firewalls, Forensics, Hacking, Hardware, Hubs, human factors, Identity & Access Management, Incident response, Instant Messaging, Interoperability, Intrusion management, Network monitoring, Network protocols, Network security, Networking, patching, PEN testing, Performance management, Ping, Platform Security, Policies, provisioning, Risk management, Routers, Secure Coding, Security, Security Program Management, Security tokens, Servers, Single sign-on, Software, Spyware, SSL/TLS, Switches, Tech support, Trojans, Viruses, VoIP, VPN, vulnerability management, Web security, Wireless, worms
Hi All, what is the basic difference between layer 2 & layer 3 switch. how can configure layer 2 & layer3 managable switch
Answer Question
| November 10, 2005 6:50 AM
Access control, Application security, Availability, backdoors, Bandwidth, Biometrics, Browsers, Cabling, Cisco, Compliance, configuration, CRM, Current threats, Database, Digital certificates, Disaster Recovery, E-business, Encryption, Exchange, Exchange security, filtering, Firewalls, Forensics, Hacking, Hardware, Hubs, human factors, Identity & Access Management, Incident response, Instant Messaging, Interoperability, Intrusion management, Network monitoring, Network protocols, Network security, Networking, patching, PEN testing, Performance management, Ping, Platform Security, Policies, provisioning, Risk management, Routers, Secure Coding, Security, Security Program Management, Security tokens, Servers, Single sign-on, Software, Spyware, SSL/TLS, Switches, Tech support, Trojans, Viruses, VoIP, VPN, vulnerability management, Web security, Wireless, worms
Event ID:16650 ,Source:SAM
Dear All, Ihave been recieving the follwoing message in My Domain Controller’s Event Viewer since i changed my Domain Controller which functions as RID Master .Ther are 3 Domain controllers(Windows 2000 Servers) in My Local Network which has about 500-700 Users.could some one please let me know how to solve the problem step by step. [...]
Answer Question
| November 11, 2005 5:08 AM
Availability, Networking
Dear All, Ihave been recieving the follwoing message in My Domain Controller’s Event Viewer since i changed my Domain Controller which functions as RID Master .Ther are 3 Domain controllers(Windows 2000 Servers) in My Local Network which has about 500-700 Users.could some one please let me know how to solve the problem step by step. [...]
Answer Question
| November 11, 2005 5:08 AM
Availability, Networking
Internet traffic
Am a vb 6 programmer i want a a code that can retrive how much bytes receive and send when we browse the net . same like when we double click on “connected to …….” that will display connected at 665675 bps, duration, bytes received and bytes sent. can u any one how i display [...]
Answer Question
| November 9, 2005 11:04 PM
Availability, Development, Networking
Am a vb 6 programmer i want a a code that can retrive how much bytes receive and send when we browse the net . same like when we double click on “connected to …….” that will display connected at 665675 bps, duration, bytes received and bytes sent. can u any one how i display [...]
Answer Question
| November 9, 2005 11:04 PM
Availability, Development, Networking
RDP connection is not the correct computer
Thanks in advance for any help! Im in a mixed 20002003 domain. When I RDP by name into several machines (all XP machines) in my building it is not the PC that I think it is. I check the actual PC name and its not the one I used to RDP into it, therefore not [...]
Answer Question
| October 25, 2005 12:30 PM
Active Directory, Availability, DataCenter, DHCP, DNS, Microsoft Windows, Network protocols, Networking, Networking services, Tech support
Thanks in advance for any help! Im in a mixed 20002003 domain. When I RDP by name into several machines (all XP machines) in my building it is not the PC that I think it is. I check the actual PC name and its not the one I used to RDP into it, therefore not [...]
Answer Question
| October 25, 2005 12:30 PM
Active Directory, Availability, DataCenter, DHCP, DNS, Microsoft Windows, Network protocols, Networking, Networking services, Tech support
DNS Old NT network
I have an old NT network with a DNS server on a W2Kserver. The DNS server was never installed correctly and I do not know that much about it. Also, it is in very bad shape and I am afraid to do too much to it. I have two locations connect over Frame relay. One [...]
Answer Question
| October 21, 2005 6:02 PM
Availability, DHCP, DNS, Networking, Networking services
I have an old NT network with a DNS server on a W2Kserver. The DNS server was never installed correctly and I do not know that much about it. Also, it is in very bad shape and I am afraid to do too much to it. I have two locations connect over Frame relay. One [...]
Answer Question
| October 21, 2005 6:02 PM
Availability, DHCP, DNS, Networking, Networking services
Restricted Groups
Hi Guys I have a query regarding the usage of restricted group in a domain enviroment. Could some pls explain the steps required to add Domain Administrator Account to the Local Administrators Groups of a node. I know this can be done but m not sure bout the steps. Please HELP!!!! Thanks Guys Asta La [...]
Answer Question
| October 13, 2005 3:33 AM
Access, Active Directory, Altiris, Availability, Bandwidth, Benchmarking, Bind, Career development, DataCenter, Desktop management applications, Desktops, DHCP, DNS, Ethernet, Fault isolation, FDDI, Frame Relay, General Directories, H.323, Intel, IPv4, IPv6, LANDesk, LDAP, Lotus Domino, Management, Marimba, Microsoft Office, Microsoft Systems Management Server, Microsoft Windows, MPLS, NetBIOS, Network applications management, Network management software, Network monitoring, Network protocols, Network testing, Networking, Networking services, NFS, Novell, Novell IPX/SPX, Novell NDS, OS, Patch management, Performance management, Protocol analysis, Remote management, Security, Servers, SIP, SQL Server, TCP, Updates from SearchWindowsSecurity.com staff, Vector Networks, Windows
Hi Guys I have a query regarding the usage of restricted group in a domain enviroment. Could some pls explain the steps required to add Domain Administrator Account to the Local Administrators Groups of a node. I know this can be done but m not sure bout the steps. Please HELP!!!! Thanks Guys Asta La [...]
Answer Question
| October 13, 2005 3:33 AM
Access, Active Directory, Altiris, Availability, Bandwidth, Benchmarking, Bind, Career development, DataCenter, Desktop management applications, Desktops, DHCP, DNS, Ethernet, Fault isolation, FDDI, Frame Relay, General Directories, H.323, Intel, IPv4, IPv6, LANDesk, LDAP, Lotus Domino, Management, Marimba, Microsoft Office, Microsoft Systems Management Server, Microsoft Windows, MPLS, NetBIOS, Network applications management, Network management software, Network monitoring, Network protocols, Network testing, Networking, Networking services, NFS, Novell, Novell IPX/SPX, Novell NDS, OS, Patch management, Performance management, Protocol analysis, Remote management, Security, Servers, SIP, SQL Server, TCP, Updates from SearchWindowsSecurity.com staff, Vector Networks, Windows
Cannot see entire network
hi all, i have formatted my system and installed win2kserver.wnen i tried configuring for network printer i am not able to connect to the printer.infact i am not able to access the workgroup itself in which the printer is.when i go to MyNetworkPlaces->EntireNetwork, i don’t see all the workgroups in the network.i tried changing my [...]
Answer Question
| October 6, 2005 7:45 AM
Availability, DataCenter, Desktop management applications, Desktops, Hardware, Management, Microsoft Windows, Networking, OS, Patch management, Security, Servers, Software, SQL Server, Tech support, Updates from SearchWindowsSecurity.com staff, Windows
hi all, i have formatted my system and installed win2kserver.wnen i tried configuring for network printer i am not able to connect to the printer.infact i am not able to access the workgroup itself in which the printer is.when i go to MyNetworkPlaces->EntireNetwork, i don’t see all the workgroups in the network.i tried changing my [...]
Answer Question
| October 6, 2005 7:45 AM
Availability, DataCenter, Desktop management applications, Desktops, Hardware, Management, Microsoft Windows, Networking, OS, Patch management, Security, Servers, Software, SQL Server, Tech support, Updates from SearchWindowsSecurity.com staff, Windows
business continuity using NAT for connection to remote server
We have two servers working on hot availability mode. They are doing ticketing transaction. Is there a way to provide business contiuity by automatically connecting the users to a remote server. The packets from users should get diverted to the new server using NAT to be implemented with a cisco router. Replication will be used [...]
Answer Question
| October 5, 2005 10:15 PM
Availability, Bandwidth, Networking
We have two servers working on hot availability mode. They are doing ticketing transaction. Is there a way to provide business contiuity by automatically connecting the users to a remote server. The packets from users should get diverted to the new server using NAT to be implemented with a cisco router. Replication will be used [...]
Answer Question
| October 5, 2005 10:15 PM
Availability, Bandwidth, Networking
CISCO SWITCHED NETWORK STP AND SMTP
In a cisco switced network when do we need to change from MSTP to STP. Ca n somebody elaborate on STP instances.
Answer Question
| October 3, 2005 9:41 AM
Availability, Bandwidth, Networking
In a cisco switced network when do we need to change from MSTP to STP. Ca n somebody elaborate on STP instances.
Answer Question
| October 3, 2005 9:41 AM
Availability, Bandwidth, Networking
AMD vs INTEL….?
Hi all, I`ve been a AMD fan as long as i know but i have a few questions for everyone! If INTEL`s chip specifies Pentium 4 3600(800FSB 1MB)LGA 775Pinn the we all know its 3.6GHZ! But Now WHY when we get to AMD specification of chipset : AMD Athlon64 ? 4000+ (PIB) 2.4GHZ, 939-Pin Processor [...]
Answer Question
| October 2, 2005 6:22 AM
3Com, Availability, Avaya, Bandwidth, Billing and customer care, Billing Support Systems, Cabling, Career development, Cisco, Dell, Development, Distribution/logistics applications, Enterasys, Foundry, Hardware, HEAT, Help Desk, Hewlett-Packard, Hubs, Interoperability, Microprocessors, Network management software, Network protocols, Networking, NIC, PeopleSoft, Printers, Routers, Software, Switches, Tech support
Hi all, I`ve been a AMD fan as long as i know but i have a few questions for everyone! If INTEL`s chip specifies Pentium 4 3600(800FSB 1MB)LGA 775Pinn the we all know its 3.6GHZ! But Now WHY when we get to AMD specification of chipset : AMD Athlon64 ? 4000+ (PIB) 2.4GHZ, 939-Pin Processor [...]
Answer Question
| October 2, 2005 6:22 AM
3Com, Availability, Avaya, Bandwidth, Billing and customer care, Billing Support Systems, Cabling, Career development, Cisco, Dell, Development, Distribution/logistics applications, Enterasys, Foundry, Hardware, HEAT, Help Desk, Hewlett-Packard, Hubs, Interoperability, Microprocessors, Network management software, Network protocols, Networking, NIC, PeopleSoft, Printers, Routers, Software, Switches, Tech support
Prefferred Anti Virus Program?
Hi All, Can i get any suggestions on what you consider being the BEST Anti virus software with not much hassles! The 2 i`m most interested in is Norton and Mcafee? Any 3rd party app will also be greatly appreciated! I had Norton 2005 Internet Security on my PC,1.7GHZ AMD,Win XP SP2, 384MG RAM and [...]
Answer Question
| October 14, 2005 6:10 AM
Access control, Application security, Automated, Availability, backdoors, Bandwidth, Billing and customer care, Billing Support Systems, Biometrics, Browsers, Career development, Compliance, configuration, CRM, Current threats, Data analysis, Data warehousing applications, Database, DataCenter, Desktop management applications, Development, Digital certificates, Disaster Recovery, Ecommerce applications, Encryption, ERP, Exchange, filtering, Firewalls, Forensics, Functional, Geographic information systems applications, Hacking, HEAT, Help Desk, human factors, Identity & Access Management, Incident response, Instant Messaging, Intrusion management, Lifecycle development, Manufacturing applications, McAfee, Microsoft Windows, Network security, Networking, patching, PEN testing, Performance/Load, Platform Security, Policies, provisioning, Risk management, Routers, Secure Coding, Security, Security Program Management, Security tokens, Servers, Single sign-on, Software, Software testing, Software testing tools, Spyware, SSL/TLS, Symantec, Systems management software, Tech support, Trojans, Viruses, VoIP, VPN, vulnerability management, Web, Web security, Wireless, worms
Hi All, Can i get any suggestions on what you consider being the BEST Anti virus software with not much hassles! The 2 i`m most interested in is Norton and Mcafee? Any 3rd party app will also be greatly appreciated! I had Norton 2005 Internet Security on my PC,1.7GHZ AMD,Win XP SP2, 384MG RAM and [...]
Answer Question
| October 14, 2005 6:10 AM
Access control, Application security, Automated, Availability, backdoors, Bandwidth, Billing and customer care, Billing Support Systems, Biometrics, Browsers, Career development, Compliance, configuration, CRM, Current threats, Data analysis, Data warehousing applications, Database, DataCenter, Desktop management applications, Development, Digital certificates, Disaster Recovery, Ecommerce applications, Encryption, ERP, Exchange, filtering, Firewalls, Forensics, Functional, Geographic information systems applications, Hacking, HEAT, Help Desk, human factors, Identity & Access Management, Incident response, Instant Messaging, Intrusion management, Lifecycle development, Manufacturing applications, McAfee, Microsoft Windows, Network security, Networking, patching, PEN testing, Performance/Load, Platform Security, Policies, provisioning, Risk management, Routers, Secure Coding, Security, Security Program Management, Security tokens, Servers, Single sign-on, Software, Software testing, Software testing tools, Spyware, SSL/TLS, Symantec, Systems management software, Tech support, Trojans, Viruses, VoIP, VPN, vulnerability management, Web, Web security, Wireless, worms
hoW TO CALCULATE bANDWIDTH UTILIZATION IN ROUTER
HI ALL HOW TO CALCULATE BANDWIDTH UTILIZATION OF SERIAL PORTS IN ROUTER, NOT USING ANY NMS APPLICATION ,MANUALLY HOW TO CALCULATE . FOR eg: I HAVE 2 MBPS CONNECTION BETWEEN MY OFFICE TO ANTOHER OFFICE , SO I WANT TO CALCULATE BANDWITDH UTILIZATION ANY ONE CAN TELL ME
Answer Question
| September 23, 2005 1:20 AM
Availability, Bandwidth, Cabling, Cisco, Frame Relay, Hardware, Hubs, Network protocols, Networking, Performance management, Ping, Routers, Switches, TCP
HI ALL HOW TO CALCULATE BANDWIDTH UTILIZATION OF SERIAL PORTS IN ROUTER, NOT USING ANY NMS APPLICATION ,MANUALLY HOW TO CALCULATE . FOR eg: I HAVE 2 MBPS CONNECTION BETWEEN MY OFFICE TO ANTOHER OFFICE , SO I WANT TO CALCULATE BANDWITDH UTILIZATION ANY ONE CAN TELL ME
Answer Question
| September 23, 2005 1:20 AM
Availability, Bandwidth, Cabling, Cisco, Frame Relay, Hardware, Hubs, Network protocols, Networking, Performance management, Ping, Routers, Switches, TCP
Windows Server 2003
I recently migrated our DC from 2K server to 2003 Server, now I have a few PC’s that are giving me connection issues. Periodically, when they try to log in and access their mapped drives or printers, they get the error message that security has been compromised. When I try to log them in, XP [...]
Answer Question
| September 27, 2005 9:39 AM
Availability, Desktops, Management, Microsoft Windows, Network protocols, Networking, OS, Security, Servers, SQL Server
I recently migrated our DC from 2K server to 2003 Server, now I have a few PC’s that are giving me connection issues. Periodically, when they try to log in and access their mapped drives or printers, they get the error message that security has been compromised. When I try to log them in, XP [...]
Answer Question
| September 27, 2005 9:39 AM
Availability, Desktops, Management, Microsoft Windows, Network protocols, Networking, OS, Security, Servers, SQL Server
Setup an sms to email gateway
Required to setup an sms to email gateway so that customers can SMS the problem they face with Internet or other systems and it can be uploaded into the systems using an email.
Answer Question
| September 19, 2005 2:42 AM
3Com, Access, Availability, Avaya, Bandwidth, Benchmarking, Cabling, Career development, Certifications, Cisco, DataCenter, Dell, Desktops, Enterasys, Enterprise Desktop, Ethernet, Exchange, Fault isolation, FDDI, Foundry, Frame Relay, H.323, Hardware, Hewlett-Packard, Hubs, IPv4, IPv6, Juniper Networks, Linux, Looking for a job, Lucent, Management, Microsoft Office, Microsoft Windows, MPLS, MySQL, NetBIOS, Network applications management, Network management software, Network monitoring, Network protocols, Network testing, Networking, Nortel, Novell IPX/SPX, OS, Patch management, People problems at work -- Get advice here, Performance management, Post a link to your IT resume, Protocol analysis, Remote management, Routers, Security, Servers, SIP, SQL Server, Switches, TCP, Updates from SearchSQLServer.com staff, Updates from SearchWindowsSecurity.com staff, Windows
Required to setup an sms to email gateway so that customers can SMS the problem they face with Internet or other systems and it can be uploaded into the systems using an email.
Answer Question
| September 19, 2005 2:42 AM
3Com, Access, Availability, Avaya, Bandwidth, Benchmarking, Cabling, Career development, Certifications, Cisco, DataCenter, Dell, Desktops, Enterasys, Enterprise Desktop, Ethernet, Exchange, Fault isolation, FDDI, Foundry, Frame Relay, H.323, Hardware, Hewlett-Packard, Hubs, IPv4, IPv6, Juniper Networks, Linux, Looking for a job, Lucent, Management, Microsoft Office, Microsoft Windows, MPLS, MySQL, NetBIOS, Network applications management, Network management software, Network monitoring, Network protocols, Network testing, Networking, Nortel, Novell IPX/SPX, OS, Patch management, People problems at work -- Get advice here, Performance management, Post a link to your IT resume, Protocol analysis, Remote management, Routers, Security, Servers, SIP, SQL Server, Switches, TCP, Updates from SearchSQLServer.com staff, Updates from SearchWindowsSecurity.com staff, Windows
IP Address Problems
My PC has a problem finding the Ip address. It changes to the alternate IP address and this is preventing me from configuring a Linksys BEFSR41 ethernet router. Please help.
Answer Question
| September 16, 2005 4:08 PM
Availability, Bandwidth, Hardware, Interoperability, Networking, NIC, Routers, Software, Tech support
My PC has a problem finding the Ip address. It changes to the alternate IP address and this is preventing me from configuring a Linksys BEFSR41 ethernet router. Please help.
Answer Question
| September 16, 2005 4:08 PM
Availability, Bandwidth, Hardware, Interoperability, Networking, NIC, Routers, Software, Tech support
