• Job QTOTNTP Running High CPU %

    I noticed a problem with a server job QTOTNTP running over 70 % CPU for several days on a test LPAR and was wondering if any anyone has seen this happen or what may have caused this job to run at high cpu % Thanks

    Security1770 pointsBadges:
  • AS/400 printing sends file to HLD status every time

    Hi, When i m trying to print the file from as/400 printer it is going into held status. writer started,printer outq is in release mode,printer device is varried on and ip address of the printer is pingable but when trying to print the file is going to PND status after some time it is going into HLD...

    Rvakkala5 pointsBadges:
  • Max active jobs in a subsystem using an AS/400 command

    Can i find the max active jobs in a subsystem using an AS400 command

    JohnsonMumbai1,160 pointsBadges:
  • print to HP OfficeJet 7780

    We have an HP OfficeJet 7780 all-in-one that has been set up as a network printer for quite a while. We have been printing to it via Windows from several PCs with no problem. I am trying to set it up as a LAN printer on our AS400 (V6R1) with no luck. I have used IBM's suggested model - *HP520 -...

    MikeSchmidtPF15 pointsBadges:
  • about 2E ( AllFusion 2E) formly known as synon

    i need an ebook or nay kind of link for information for learning about t synon tool used on as/400 system. can you please help you can send me information at manavgeet@hotmail.com thanks in advance

    Manavgeet240 pointsBadges:
  • New Web Service Project

    Hi, Currently an iSeries job runs every 10 minutes where, at the back end, a file is read (more than 400 fields), a pipe delimited file is created and FTP'd to an outside location. Volume would normally be low but intermittently there could be a spike. I need to replace the FTP process with a...

    AL04285 pointsBadges:
  • FTP to AS/400 connection closed

    We switched from cable to Fios internet and FTP to 400 stopped working - getting "connection closed by remote host" - checked netstat and joblogs - what's wrong??

    JBarrows5 pointsBadges:
  • iSeries to SQL Server via SSIS 2005

    We have multiple DB2 Schema's that are indentical. iSeries tables built using DDS. Looking for a way to use a varible to declare schema vs. having hard coded SQL Statements in SSIS.

    Oldmickey65 pointsBadges:
  • How to access AS400 during restricted state?

    After I've browsed internet, I almost felt it is only me, who's looking for answer to this. As I have one partition with only 2G memory and 0,1CPU saving 4T, I don't want to let it down for 11 hours - well, it is just backup system, so even if down, it causes no harm. But still...I would like to...

    Champs60 pointsBadges:
  • QZDASOINIT job?

    Hi , am recieving the following error messages Message . . . . : Error occurred while calling program or procedure *LIBL/NBCUNQSN (C G D F). caused by the QZDASOINIT job. I presume this is a ODBC job that runs in QSERVER, any ideas as to what has to be done. The backup is running currently and this...

    harisudhan211,005 pointsBadges:
  • Unable to run Upgrade Assistant on AS/400 V3R2

    i'm 1st time taking up the task in CISC to RISC migration, with the following scenarios :- 1. i've tested Upgrade Assistant in a V3R2 model 300 machine at my workplace, and it's running fine, with spool file of the Upgrade Assistant generated. 2. However, my team mate at remote site was unable to...

    LifeHouse5 pointsBadges:
  • AS/400 compile options

    Hi team.. I forgot how to do this... Where do i change the outq so that when I compile a pgm, the compile report goes to a sepcific outq? right now it defaults to PRT01.

    Svocal120 pointsBadges:
  • iSeries Access printing with Lexmark 2381 printer

    Hi We have a client using IBM Power 6 Server with Os/400 V5R4 using Iseries Acces version 6 to control a Lexmark 2381 printer contected to a P.C. The problem we are having is we are trying to print an 8 1/2 " form (51 lines) and the first form prints fine (Continuese forms) but at the end of the...

    Semd041970 pointsBadges:
  • Check if a specific job for a user is active.d

    I found CHKACTJOB which will tell me if a generic job for a user is active. How can I find out if a specific job number for a user is active?

    Len102715 pointsBadges:
  • RPGILE comparing values

    i have a value say for example ASD12246. i need to check this value against afile which contains similar values lik this. i need to pick the value that has maximum matches with this number. Sa y for example if the File has ASD122 and ASD1224 i have to selct the code corresponding to ASD1224 as it...

    Deepz30 pointsBadges:
  • Client Access Printers

    change spoolfile to go that printer, it has worked before, looks like it printed but go to printer and nothing.

    Tclark00095 pointsBadges:
  • Generate PRN file on AS/400

    I want to know, if there is any way to generated PRN file on AS/400 from a spool file, using Host Print Transform. I am thinking of storing rendered print jobs(PRN files) on IFS and print them later.

    Tenwang35 pointsBadges:
  • XML parsing in COBOL on iseries

    Can I get an example of how to parse XML document in ILE COBOL? I need both SAX and DOM parser examples.

    Sivan5 pointsBadges:
  • How do I display a clickable link from database in table using PHP?

    I have a table and when I pull a clients info up I would like the web address to be able to be clicked to view web site. How would I code this in? Here is some of my code. $num_rows = mysql_num_rows($query); print "<b>Here is my Information on you. <br><br>E-Mail me with any...

    BigAL095 pointsBadges:
  • AS400 Query Security

    How can I secure an AS400 query allowing only two individuals the ability to change or delete the query?

    Clhalfa30 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following