• Clear Printer Msg on AS-400 after hardware error on HP1505n

    Yesterday the print cartridge on our new HP1505N printer got jammed. I cannot get the AS-400 printer message to clear. I have disconnected it from the ethernet cable; turned it off at toggle; disconnected power cord from power source; ended the printer/writer, varied it off and back on..and still...

    Daks120 pointsBadges:
  • AS400 Backup issue

    Any tips to solve our backup issue with AS400 uring  the weekly backup one of Important Library is not saving, getting the below message. Message . . . . :   Attempted to save too many objects or database file members.

    Syedm180 pointsBadges:
  • iSeries Printing

    I need to print two forms on one page. Using CHGPRTF attribute MULTIUP which is supposed to allow two pages to print on one side. But it does not work. Any assistance would be appreciated. :)

    Kdbwheels180 pointsBadges:
  • AS/400 printer setup

    Anyone know of a good resource or training guide on everything there is to know about setting up printers on the 400? And troubleshooting them? All different makes and model.? How to even find out if they're compatible with what you're trying to print, etc. From kindergarten level on up. Thanks.

    Jean43370 pointsBadges:
  • why does the PDF not print same size as the original?

    the document generates as a PDF with overlay correctly, but when printed is smaller than original document. Document is landscape-OVRPRTF pagrtt(*90) pagesize(51 132).   Thanks Anne

    annehill55 pointsBadges:
  • Printer IP’s

    How do I get a list of all my printer IP addresses in one report without having to go into the set up of each individual printer. I have 3000 and that would be a nightmare.

    Guy553435 pointsBadges:
  • Workstation Customization Object

    Hi, I am trying yo print a label on a Lexmark E450dn printer that is connected via AS400. The problem i had is that everytime i print a label, the printer keep prompting me to press the button to proceed. The message on the printer is "Load Plain Paper" Anyway, can we bypass this messages with the...

    tedsoh210 pointsBadges:
  • AS400 query print landscape/legal?

    How do you get Query to print in landscape on legal sized paper? I tried adjusting the paper size but that didn't seem to help.

    Lilarose95 pointsBadges:
  • How to get different font sizes to print on an iSeries report

    I am trying to change an AS400 print file so that we can print some fields larger than others. The file is printing to a laser printer via client access print emulation session. I have tried to use the FONT keyword but it's not making a difference. Any ideas how I can acomplish this? Thanks

    Lehanb30 pointsBadges:
  • Favorite printer in AS 400 environment

    Just curious if anyone has a fav printer in the AS-400 world.  The HP4200 / 4250 has worked well for us and unfortunately can no longer buy new. Suggestions?  

    Clwaid25 pointsBadges:
  • How do you change the source of printer when printing from AS400

    Hello all, we get regular requests to get AS400 prints from a specific tray. I know we can do from wrkdevd, but how does it work from a SPLF perspective. to reach only specific tray in the file

    harisudhan211,005 pointsBadges:
  • AS/400 LAN printer problem

    Hi,  Two OUTQs in two systems has been assigned to the same lan printer.ie both systems have a device and OUTQ created with the same IP address. but out of two, the one which is starting first is taking the control and the print from the other printer is going to PND status.  Both Printers have...

    AdminAS40015 pointsBadges:
  • Printers with Axis box shutting down upexpectedly since V6R1 upgrade

    Our HP 4xxx series printers (with Axis 'boxes') printer writers are shutting down several times during the day. It started after upgrading to V6R1. We changed the 'Printer Error Message' parameter from *INQ to *INFO and that helped all but the above mentioned printers. Anybody know about a fix for...

    reg280 pointsBadges:
  • IBM Infoprint 1852 printer

    I have an 1852 installed and working on an IBM iSeries. Want to add capability to print documents from Microsoft Word. Loaded drivers and can print test page OK. Works fine until it receives data from the iSeries. Then it will not print Word documents until the printer is turned off and on again.

    wej12475 pointsBadges:
  • TCP3436 – AS/400 printing

    I have an Epson DLQ3500 printer set as a remote OUTQ. It is intermittently stopping, sometimes mid print, and I get TCP3436 as the message Message . . . . : No response from remote host system within open time-out. Cause . . . . . : An open request was sent to a remote host system, but that host...

    KasMcc230 pointsBadges:
  • How to display page 1 of n

    I'm using AS/400 DDS printer file to print PO. It is using OVERLAYS. How can I print Page 1 of 2, and page 2 of 2.

    pwopen12240 pointsBadges:
  • Need to display a PDF on i5

    I need to display a PDF file that was created using OVRPRTF with WSCST(*PDF) on the user's i5 screen. I have tried IFS command DSPF but only garbage displays. This program used to do a DSPSPLF but we had to change it to use an overlay and only the data shows (none of the text of the overlay) when...

    HappyLackey35 pointsBadges:
  • Spool Manager/400 and V5R4 – any issues?

    We are about to upgrade to V5R4 on our iSeries. We run a utility called Spool Manager/400 (obtained in Europe) which is at version 310. Can anyone advise if there are any issues with this verion of Spool Manager/400 at V5R4. We have been trying to get some support from the company we pay for...

    djac900 pointsBadges:
  • Combining printer files from multiple programs in one spool file in a job.

    We run one job with several checks at night. All these program use the same PRTF, but each results in a separate spool file. Is it possible to have the output from all these programs in one spool file? I.e. pgm1 has printed output and I want pgm2, pgm3, in the same job to add to it.

    r.otto810 pointsBadges:
  • PRTFIL description

    how to find a field? I have to change a fonction. I have an error: screen is to large but i can not find where is the problem. It is a fonction PRTFIL, large 198 and all the fields i can see are less than 198. Perhaps there is a field (blank,constant) anywhrere but where? What can i do to find the...

    Clinder15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following