• AS/400 Page Segment Issue

    I am trying to replace a signature using page segment in V5R3. Previously I created the page segment using V4R4 and it is working in new operating system. But now I need to change the signature. It is now printing in different position. Old DDS : R PRTFRM OVERLAY(FORM 0 0) R SIGN1...

    RC20095 pointsBadges:
  • Cannot print Thai characters using V5R3.

    In our AS400 V5R2, we are able to print Thai characters in our documents. But now that we are trying to do some test printing in our UAT machine, we are not able to print thai characters. It just prints garbage characters, and sometimes, not even printing at all, but just a blank page. Any advise...

    Chelroque5 pointsBadges:
  • Reverse Printing

    I wanna ask if there's a way to reverse the printing of a certain spoolfile? If there is, can somepne please show me the code/process on how to do it. Thanks a lot.

    Radycal45 pointsBadges:
  • how do I cancel printing of a user-open AS/400 print file?

    I'm on V6R1 and I have a printed report that I need to suppress if it contains no data. Currently it prints out a heading section and then a notice that '0 records were modified.' Unfortunately, the program logic behind the report is not simple enough for me just to do a record count and see if...

    Koohiisan5,020 pointsBadges:
  • printing wrong currency symbol

    Our remote outq printers print $ instead of £ - even though the spool file displays the correct symbol. Swopping the hex values on the code table 437 on the *WSCST makes no difference.

    Padvenco5 pointsBadges:
  • lexmark printer on iSeries

    What are the specific settings to connect a Lexmark model 658 to an iSeries system using ip and crtdevprt.

    Mballai15 pointsBadges:
  • Netgear print server

    Using a Netgear print server device to connect to an HP 1319 MFC. What port should I use for device description?

    Davekobus20 pointsBadges:
  • How to change the report margins?

    I have added a *WSCST (created from HP4000 source) to my print outq on the AS400 to print off my report at 13.3 CPI which is fine (it's printing landscape). However, now I need the report to start printing slightly further down on the page, i.e I need the page margin on top to be slightly bigger by...

    Lehanb30 pointsBadges:
  • AS/400 virtual printer error – Device XXXX configuration not valid. Reason code 2301.

    This virtual printer device has been working for months, but now it just stopped. Any advice?

    TroyBekker15 pointsBadges:
  • as400 printer spool file identifier

    before our system crashed last week, all spool files printed from our as400 were preceeded by a "header page" or a single sheet that identified the user, job #, date and time and I think a little additional informatin but since the system restore, we no longer get that "identifying" page before all...

    Siscomputerspecialists45 pointsBadges:
  • Printing Physical File Records

    I wanted to print the Records in Physical File with out using 1. RPGLE Program 2. Query I wanted to print the PF records using WRKMBRPDM and Option 6 Please help me to find the solution

    rajeshece1,215 pointsBadges:
  • Missing pages AS/400 remote client access printer

    I have a PC writing spool entries to an as400 outq (using HPLJ4 or HPLJ5 drivers) which are then printed on a remote client access printer when the printer is connected. We are frequently losing one or more pages at the start, in the middle or end of a print run. When I use a re-send facility to...

    AussieObserver5 pointsBadges:
  • Report Layout Utility

    how can i pass the values in my subfile to my printer file using rpgile....

    Rpgile25 pointsBadges:
  • spool file

    how to conver the spool file from as400 into pc?

    TahaNasr5 pointsBadges:
  • AS400 Printing font too small or too large and wrapping

    I recently installed a new printer - Oki 420 - I cannot get the font to come out correctly. Either the font is too large and the printing wraps or it is too small and users can't read it. The only way I know of to change this is by changing the printer model in the printer emulation setup. The...

    Jmyrvik5 pointsBadges:
  • IPDS Stream File and Duplexing

    I am including the duplex option and adjusting the Medium Copy Count and the Medium Modification Control to reflect duplexing in the stream file. I must be missing something, when the spoolfile prints, the printer sounds like it is duplexing, but does not print on the back of the form. The next...

    anncyb80 pointsBadges:
  • iSeries and PDF

    Hi Guys, I know there has been some discussion going on with PDF printing. We use CreatePrint for our printing solution off the iseries. But would like to investigate if its possible to merge spool file (invoice) with a PDF form (if there is such a thing) and print, possibily via IFS. Basically...

    tjgm88995 pointsBadges:
  • How to remove printed spooled file from output que list

    We had several files that printed remain in either 'PND', 'WTR', or 'PRT' status. I ended the writer and was able to delete the ones in PND and WTR status. The file with PRT status remains. It does not affect printing other files. Tried vary off/on, stop/start writer, cleared printer buffer, turned...

    Kamari25 pointsBadges:
  • Cannot Vary On AS/400 printers

    A customer lost power unexpectedly. They re-IPLed the system and two of the printers will not come back on line. They are both Class *VRT and one is model *HP4 and the other is blank. Even though they are not active they are showing Job Number QCMNARB03. If I vary them off, turn off the power and...

    Dsrpg45 pointsBadges:
  • PDF stored on IFS drive how do you get native AS400 to print

    Documents are being stored into an IFS folder as PDF. Need the ability to have a native AS400 print them. Any ideas on how this can be done?

    Smcovidien5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following