• Problem on convert SCS spool entry into AFPDS spool file

    Is any possible way to convert a SCS spool entry into an AFPDS spool file with all the refernece fonts being embedded into .RSC file? And if is really the case, can we identify the fonts which is being used by SCS spool entry and export those fonts being used in other ways (e.g. exported as an .fnt...

    Samchan50 pointsBadges:
  • as/400 printer error IGCDTA

    I am having trouble printing on emulation printers (local). I am getting an error about IGCDTA i can still G and then ingnore but the print ou is not okay. Can anyone help. it's a 270 system with V5r4 installed

    Humbertodeluca5 pointsBadges:
  • HP5si printer error — cycling from PND to RDY

    My setup of an HP5si printer continues to fail - actually goes to a PND status, then the writer ends and the file staus changes to RDY. The device description is below. I have tried many setting changes but to no avail. The printer works great from Windows and I can ping it and it 'looks' like it...

    AS400 - Ask the Expert485 pointsBadges:
  • How to connect a remote printer

    I have a remote warehouse that has several pc's that connect to my as400 using client access. I want to install a zebra 105sl printer out there. Can anyone help me with the configuration ???

    Giftbox145 pointsBadges:
  • ISeries Report printing to network printer – font too small

    We have an AS400 print file which is defined with: 10 CPI, 6 Lines per Inch, Width of 132, Length 66, Font Idetifier is *CPI. We were using an AS400 print emulation session to print the report but want to get rid of this and use a device/outq on the as400. The report prints to a networked HP4050...

    Lehanb30 pointsBadges:
  • Delete AS/400 printer?

    I created a printer (not a remote outq) but need to delete it. No jobs are in the outq. Deleted the writer. Varied OFF the printer.  Can't delete the outq or the printer itself. I followed my hand-me-down list of creation steps and they worked, but I have no instructions for deleting it.

    GM201025 pointsBadges:
  • Configuration for successful laser printing

    I am a RPG programmer/analyst trying to assist a remote client that just purchased a HP4350 printer and is having issues with the character size. She wants the character size to match what she is used to on her ancient impact printer. Unfortunately, the characters on reports printed on her new...

    Bruzgoi45 pointsBadges:
  • Could you please advise the command to print hardware config. from AS/400

    Could you please advise the command to print hardware config. from AS/400

    Zyrain5 pointsBadges:
  • Iseries 5.4 HP Printing.

    We have been replacing our HP printers throughout the organization. I have updated the new IP address within the wrkdevd and updated the driber info. Now when the user prints from the AS/400 it will print portrait instead of landscaped....where should I be looking....this is driving me nuts! THanks

    Rmason345 pointsBadges:
  • Barcode problems on IPDS laser printer connected to iSeries

    I have an *AFPDS spool file with a vertical barcode. The program and printer file have not changed and were working correctly previously. Data still prints correctly on a network printer, but the barcode is printed in an incorrect position (overlaying other data) when printed on an HP LaserJet...

    RacewDonna15 pointsBadges:
  • Print AS/400 spool file with arabic on laser jet

    How to print AS/400 spool files with Arabic text on Laser Jet. Currently the arabic text is printed as non-readable charachters.

    Koloor5 pointsBadges:
  • DSPF / SNDRCVF

    Can I declair two files in one single cl program and use the command SNDRCVF

    SOUTHEAST30 pointsBadges:
  • AS/400 Duplex printing

    I am printing from the AS/400 to a KYOCERA copier... I am printing the report on both sides of the paper... I would like to skip to the next sheet of paper at a level break... Any ideas???

    Mopaco5 pointsBadges:
  • HP Printer Problem on windows print server

    Hi, There is a HP Printer hosted on Windows Print Server.This printer prints junk charachters in PDF file intermittently .The printer name is EXPN005.A printer with same name exsts on AS400. Is there any thing at all which needs to be checked on AS400 side for the junk charachter printing ? Please...

    Sverma15 pointsBadges:
  • Problem when printing from AS400 to Cannon 550

    Printer was working fine when suddenly it stopped comunicating with the A/S 400. I can ping it from the system, I can print from the network. Message ID . . . . . . : PQT3625 Severity . . . . . . . : 40 Message type . . . . . : Information Date sent . . . . . . : 04/05/10 Time sent . . . . . . :...

    Patillasrc25 pointsBadges:
  • print on lexmark 2480 in 10cpi

    I defined a lexmark 2480 as a PC5250 printer on the Iseries. It has an OUTQ and a device description with the 10CPI in it. When I print to it, the print is compressed and looks like 17CPI. In the PC5250 definition, I used courier 10, and I checked the transform print data to ascii on iseries, and I...

    Lark5 pointsBadges:
  • PRINTER FILES

    CAN ANY ONE EXPLAIN ME WHAT IS A PRINTER FILE IN AS/400?

    Gathu5 pointsBadges:
  • Underline extends beyond text when printing from AS/400

    I defined a 24-character field in DDS using fgid 4919 (goudy) with the underline keyword.  When I print the field from my RPG program the underline extends beyond the characters contained in the field.  The length of the underline varies depending on the number and width of the characters in the...

    AS400 - Ask the Expert485 pointsBadges:
  • AS/400 Printers

    At the company i work for we have about 15 Laser Printers that should be getting ended and started every morning. Throughout the day however, some printers will randomly end on there own and we then need to start them back up. Sometimes we get the MSGW and can't respond to it so we then have to end...

    Jrbednarek1135 pointsBadges:
  • AS/400 Printer

    I am trying to get a print of AS400 report. But i am getting the report in Landscape format. For getting it in the Portrait format, what should I do? And this is nothing related with printer because printer is working fine for other formats such as doc files or pdf files. But in case of spool...

    Wrksplf5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following