• as400 client access and okidata printer

    How can I get client access allow printer to use printer default settings (i.e.) condensed print -- also skipping pages between reports

    Bigfox20005 pointsBadges:
  • Delete AS/400 printer?

    I created a printer (not a remote outq) but need to delete it. No jobs are in the outq. Deleted the writer. Varied OFF the printer.  Can't delete the outq or the printer itself. I followed my hand-me-down list of creation steps and they worked, but I have no instructions for deleting it.

    GM201025 pointsBadges:
  • HP4015 Tray selection from AS400

    We have a printing issue on hp4015 PRINTER The letters are currently printing on plain papers(tray 2) which were actually supposed to print on letterhead(TRAY 3) Please let us know the tray numbers for TRAY 2 SIMILAR TO ['1B266C3148'X})

    harisudhan211,005 pointsBadges:
  • AS400 – From a HP LJ 1300 to a HP LJ P1505

    I just replaced a Locally attached HP 1300 laserjet with a HP 1505 Laserjet I series printer. The printer will print "Print Screens" but will not print our decals(??) I release the spool file, it goes back to a *SAV status but it will not print to the new printer. I have made sure the I series name...

    Rmason335 pointsBadges:
  • as400 printers

    well i have  a few netnork printers that connected to as 400 how can deal with them. now i have a memorex printer in other site  and it doesnt work  i replace it with tally  and copy the addres on the non working printer and it doesnt work who can i deal with the printers the printers that...

    Yuval5 pointsBadges:
  • Problem when printing from AS400 (iSeries) to Canon irc1021

    Hi everyone, We have changed one of our HP-printers to a Canon iRC1021 but does not work when sending a spool file from our AS400  just one line of =#*?&% characters is printed. Does anyone has a clue about this problem and how to get it work? Greatfull for all help. Thanks/Stefan

    STCA60 pointsBadges:
  • iSeries Printer session issue on Vista

    On my new Vista workstation, I have a configured an I series(V5R3) printer session for my HP CP1200 series printer. I can send spool files to the printer, but it comes out with small fonts. I have tried changing fonts but it always prints in the same fonts. I had this problem on XP, but i was able...

    Svocal120 pointsBadges:
  • printer trouble shooting for client access printer

    this printer is hooked up direct to a pc with client access. it was working last week. we print production cards on it. we cannot get the printer to stay active. getting message printer not recognized. i checked the devices on the iseries side. and checked everything that i know how to do....

    Metro40010 pointsBadges:
  • HP5SI Network Emulation

    Is there a way to tell the AS400 emulated network printer which drawer is the default drawer that could be different from HP default.

    Kasey455 pointsBadges:
  • as400 printer spool file identifier

    before our system crashed last week, all spool files printed from our as400 were preceeded by a "header page" or a single sheet that identified the user, job #, date and time and I think a little additional informatin but since the system restore, we no longer get that "identifying" page before all...

    Siscomputerspecialists45 pointsBadges:
  • Cannot Vary On AS/400 printers

    A customer lost power unexpectedly. They re-IPLed the system and two of the printers will not come back on line. They are both Class *VRT and one is model *HP4 and the other is blank. Even though they are not active they are showing Job Number QCMNARB03. If I vary them off, turn off the power and...

    Dsrpg45 pointsBadges:
  • ML320T Not working on my AS400

    I had a Microline 321Turbo in my Pharmacy and was working fine until a surge messed it up. I bought a new ML320T and made sure that the configuration is the same. However, it is printing 3 lines of garbage characters and at times it prints in the roller. I made sure the labels are printing on a 3"...

    GGOMEZ10 pointsBadges:
  • as400 printer

    how to ens and start printer without calling the same program twice?

    Viartyjo5 pointsBadges:
  • Adding a network printer to our AS/400

    I need to add a network printer to our AS/400. We no longer have an operator or sys admin or support.

    Bobzt5 pointsBadges:
  • Very New to AS/400 Operations (and I hate printers already)

    I have an Okidata 590 impact printer that needs to be created on our AS/400. I used CRTDEVPRT to create the new printer device, but I'm not sure what to select in all the parameters and the printer will not print. I can ping the device on the network. And I get the outq to say RLS/WTR but the print...

    Jean43370 pointsBadges:
  • HP LaserJet 4250 with IPDS card and AS/400

    Hello, we have an HP 4250 that we installed an IPDS card. I configured a printer device on the AS400 with a type of *IPDS and the spool files just stay in a pending status. Any ideas?

    Jetfixtures5 pointsBadges:
  • How do I setup a printer on an AS/400 system?

    I have the following scenario: - System AS400 running on V4R5 - An Okidata printer connected to a D-Link print server via USB - A D-Link print server which running TCP/IP on the network I'm able to ping and connect to the D-link print server. I can connect the printer via a remote out queue but I...

    WM460 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following