AS/400 Printers

Problem when printing from AS400 (iSeries) to Canon irc1021

Hi everyone, We have changed one of our HP-printers to a Canon iRC1021 but does not work when sending a spool file from our AS400  just one line of =#*?&% characters is printed. Does anyone has a clue about this problem and how to get it work? Greatfull for all help. Thanks/Stefan

iSeries Printer session issue on Vista

On my new Vista workstation, I have a configured an I series(V5R3) printer session for my HP CP1200 series printer. I can send spool files to the printer, but it comes out with small fonts. I have tried changing fonts but it always prints in the same fonts. I had this problem on XP, but i was able...

HP5SI Network Emulation

Is there a way to tell the AS400 emulated network printer which drawer is the default drawer that could be different from HP default.

as400 printer spool file identifier

before our system crashed last week, all spool files printed from our as400 were preceeded by a "header page" or a single sheet that identified the user, job #, date and time and I think a little additional informatin but since the system restore, we no longer get that "identifying" page before...

printer trouble shooting for client access printer

this printer is hooked up direct to a pc with client access. it was working last week. we print production cards on it. we cannot get the printer to stay active. getting message printer not recognized. i checked the devices on the iseries side. and checked everything that i know how to do....

Cannot Vary On AS/400 printers

A customer lost power unexpectedly. They re-IPLed the system and two of the printers will not come back on line. They are both Class *VRT and one is model *HP4 and the other is blank. Even though they are not active they are showing Job Number QCMNARB03. If I vary them off, turn off the power...

ML320T Not working on my AS400

I had a Microline 321Turbo in my Pharmacy and was working fine until a surge messed it up. I bought a new ML320T and made sure that the configuration is the same. However, it is printing 3 lines of garbage characters and at times it prints in the roller. I made sure the labels are printing on a 3"...

AS400 - From a HP LJ 1300 to a HP LJ P1505

I just replaced a Locally attached HP 1300 laserjet with a HP 1505 Laserjet I series printer. The printer will print "Print Screens" but will not print our decals(??) I release the spool file, it goes back to a *SAV status but it will not print to the new printer. I have made sure the I series...

as400 printer

how to ens and start printer without calling the same program twice?

AS/400 printer setup

Anyone know of a good resource or training guide on everything there is to know about setting up printers on the 400? And troubleshooting them? All different makes and model.? How to even find out if they're compatible with what you're trying to print, etc. From kindergarten level on up. Thanks.

Adding a network printer to our AS/400

I need to add a network printer to our AS/400. We no longer have an operator or sys admin or support.

Very New to AS/400 Operations (and I hate printers already)

I have an Okidata 590 impact printer that needs to be created on our AS/400. I used CRTDEVPRT to create the new printer device, but I'm not sure what to select in all the parameters and the printer will not print. I can ping the device on the network. And I get the outq to say RLS/WTR but...

HP LaserJet 4250 with IPDS card and AS/400

Hello, we have an HP 4250 that we installed an IPDS card. I configured a printer device on the AS400 with a type of *IPDS and the spool files just stay in a pending status. Any ideas?

How do I setup a printer on an AS/400 system?

I have the following scenario: - System AS400 running on V4R5 - An Okidata printer connected to a D-Link print server via USB - A D-Link print server which running TCP/IP on the network I'm able to ping and connect to the D-link print server. I can connect the printer via a remote out queue but I...