• How to determine the processor type of iSeries? please read full question

    To be more precise in the question, for example we have Intel Core2duo , AMD , Xenon and so many processors with appropriate GHZ given and speed as well. We have 825 box with a Processor feature code of 7418, does that fall under power4 /5 . Also we have a 720 box and a 820 box with processor...

    harisudhan211,005 pointsBadges:
  • Cost per GB of disk for iSeries? Please could some one help me on this.

    Cost per GB of disk for iSeries? Please could some one help me on this.

    harisudhan211,005 pointsBadges:
  • AS/400 iseries PTF prerequisites

    what are the Perquisites when we will install the PTF

    VenkatPemmasani40 pointsBadges:
  • AS/400: CISC or RISC

    How can find out my system is CISC one or RISC one?

    qmaster1,675 pointsBadges:
  • Is there a way to make AS/400 pickup device via IP Address?

    We have Kronos time clocks which uses twinax to communicate with the AS/400. Now we're moving everything to Ethernet and purchased Ethernet module/card for the time clocks but can’t get AS/400 to recognize them via IP Address. I don’t think there is a way to name the device on the time clock. I...

    Jka15 pointsBadges:
  • Problems whislt iSeries LIC recovery

    Hi, We are trying to recover our DR machine its 825 and i550, when trying to boot from the SAVSYS tape we recieve the following errors i550 - B167 4609 825 - B200 300 Not sure if they are related to LIC program corrupt on the tape or something else as am not able to find it on the web as well?...

    harisudhan211,005 pointsBadges:
  • We have a Cache Battery failure on 550boxes, will it affect?

    We have a Cache Battery failure on 550boxes, and the disks attached to the disk controller seem to show degrade in performance, and to replace it we might need to IPL to DST, but our customer has not agreed for a downtime till 20 more days to come. WIll it cause a problem or is it OK to run with...

    harisudhan211,005 pointsBadges:
  • CPPEA02

    Please Waht meaning thise mesage : *Attention* Contact your hardware service provider now. Internal analysis of an exception indicates that hardware service is required now. Recovery . . . : Contact your hardware service provider and provide the following list of possible failing items: IOPIP13...

    Anwaras30 pointsBadges:
  • AS/400 model 820 has a msg

    okon the panel while the machine isoff 10111520 fn 97P4024 and there is an yello error on the panel after i IPL'd the log showed CPP0109 Detect ac lost andthere is a clicking sound from the back the machine is working but complaining on power supply hasanyone replaced power supply ? whats is the...

    Dmonselise150 pointsBadges:
  • Which iSeries models support P6 processors?

    Hi We currently have 550 and 825 boxes, am assuming they are all P5 processors. Please could you tell me which are the model boxes that would support P6 processors? Thanks in advance

    harisudhan211,005 pointsBadges:
  • AS400 9406-800 with and 7116 Expanision unit System attention error

    I got an AS400 9406-800 with and 7116 Expanision unit. I was able to get the AS400 up and running without the expansion unit. I can't get the expansion to power up, (Just makes a very small clicking sound, with no panel lights on). In the process I changed the IPL setting under the 07 option from...

    Lawrence0845 pointsBadges:
  • AS/400 Server Migration

    Hi, My customer is looking for migrating the AS400 servers from one location to another. Please can anyone suggest me a high level plan(pre migration & post migration) of how to go about this as I have not done sever migration before. Many Thanks in advance. Regards Hughes Williams

    Hugheswilliams345 pointsBadges:
  • Unable to run Upgrade Assistant on AS/400 V3R2

    i'm 1st time taking up the task in CISC to RISC migration, with the following scenarios :- 1. i've tested Upgrade Assistant in a V3R2 model 300 machine at my workplace, and it's running fine, with spool file of the Upgrade Assistant generated. 2. However, my team mate at remote site was unable to...

    LifeHouse5 pointsBadges:
  • Transporting an AS400

    I want to transport my AS400 off site for a backup solution. Does anyone know of a command to disable the hard disk reading arms so the disk does not get damaged in transport?

    Breinhart45 pointsBadges:
  • Easiest way to swap drives on 9406-520 AS/400

    I have a 9406-520 with six (every slot full) 36 GB drives. We need to replace all six drives, with six 73 GB drives. What's the easiest, quickest way to accomplish this task? Thanks!!

    AS400 - Ask the Expert485 pointsBadges:
  • BRMS and IBM 3494 tape library

    WE have an IBM 3494 with 4 tapes. We have 5 AS400. I am trying to connect all the AS400 (fibre) to the IBM 3494 through a Fibre switch. I am having trouble zoning the switch. At the switch i have a fibre connection for each AS400 and a fibre connection from the switch to the 4 tape drives. My...

    Jswagner5 pointsBadges:
  • No Workstation

    How do i shutdonw without a console and AS/400?

    Slowguy5 pointsBadges:
  • Want to know how configure fuctions in the IBM ULT 3582 Tape Drive?

    Want to know how to Configure the Functions of Tape Drive?

    Harish.kuolkhere190 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following