AS/400 Hardware

iSeries Internal Battery Power unit failure, will this impact the system ?

We have a Internal Battery power unit failure on one of our iseries boxes and the it requires downtime for replacement, but customer wants to give downtime after 15 days.Will this impact the system? is there any risk due to this?

what is the difference between CPW interactive and CPW batch? How do i determine both using the System model and proc feat

what is the difference between CPW interactive and CPW batch? How do i determine both using the System model and proc feature code in iSeries Software/Hardware used: as400

ASP

I have AS/400 9406-270 with expansion unit 12 H.D.(4318)connected to 2763 IBM PCI RAID Disk Unit Controller assigned as ASP1.(175GB with ASP %91) I added six 4318 H.D.(to decrease the percentage)and connected them as parity to second 2763 IBM PCI RAID Disk Unit Controller and I assigned them as...

How to determine the processor type of iSeries? please read full question

To be more precise in the question, for example we have Intel Core2duo , AMD , Xenon and so many processors with appropriate GHZ given and speed as well. We have 825 box with a Processor feature code of 7418, does that fall under power4 /5 . Also we have a 720 box and a 820 box with processor...

Cost per GB of disk for iSeries? Please could some one help me on this.

Cost per GB of disk for iSeries? Please could some one help me on this. Software/Hardware used: as400

How do i find a processor model of an iSeries

Hi, How do i find the Processor model of an iSeries. I know the Processor feature code of the iSeries we have is 7418. And the system is an 825 model. How do i determine that?Thanks in advance Software/Hardware used: as400

AS/400 iseries PTF prerequisites

what are the Perquisites when we will install the PTF

AS/400: CISC or RISC

How can find out my system is CISC one or RISC one?

Is there a way to make AS/400 pickup device via IP Address?

We have Kronos time clocks which uses twinax to communicate with the AS/400. Now we're moving everything to Ethernet and purchased Ethernet module/card for the time clocks but can’t get AS/400 to recognize them via IP Address. I don’t think there is a way to name the device on the time clock. I...

Problems whislt iSeries LIC recovery

Hi, We are trying to recover our DR machine its 825 and i550, when trying to boot from the SAVSYS tape we recieve the following errors i550 - B167 4609 825 - B200 300 Not sure if they are related to LIC program corrupt on the tape or something else as am not able to find it on the web as well?...

CPPEA02

Please Waht meaning thise mesage : *Attention* Contact your hardware service provider now. Internal analysis of an exception indicates that hardware service is required now. Recovery . . . : Contact your hardware service provider and provide the...

We have a Cache Battery failure on 550boxes, will it affect?

We have a Cache Battery failure on 550boxes, and the disks attached to the disk controller seem to show degrade in performance, and to replace it we might need to IPL to DST, but our customer has not agreed for a downtime till 20 more days to come. WIll it cause a problem or is it OK to run with...

How I remove hard disk from AS/400 server model 800?

how i remove hard disk from as400 server model 800?

Which iSeries models support P6 processors?

Hi We currently have 550 and 825 boxes, am assuming they are all P5 processors. Please could you tell me which are the model boxes that would support P6 processors? Thanks in advance

AS/400 model 820 has a msg

okon the panel while the machine isoff 10111520 fn 97P4024 and there is an yello error on the panel after i IPL'd the log showed CPP0109 Detect ac lost andthere is a clicking sound from the back the machine is working but complaining on power supply hasanyone replaced power supply ? whats is...

AS400 9406-800 with and 7116 Expanision unit System attention error

I got an AS400 9406-800 with and 7116 Expanision unit. I was able to get the AS400 up and running without the expansion unit. I can't get the expansion to power up, (Just makes a very small clicking sound, with no panel lights on). In the process I changed the IPL setting under the 07 option from...

AS/400 Server Migration

Hi, My customer is looking for migrating the AS400 servers from one location to another. Please can anyone suggest me a high level plan(pre migration & post migration) of how to go about this as I have not done sever migration before. Many Thanks in advance. Regards Hughes Williams

AS/400 Upgrade

Hello, Our customer have a i550 box with a V5R3 running on it. We are planning to upgrade both the Hardware as well as the OS as well as the disk towers have consumed huge space. Not sure which one to proceed first as we thought that upgrading the hardware & then OS will be better, but customer...

Unable to run Upgrade Assistant on AS/400 V3R2

i'm 1st time taking up the task in CISC to RISC migration, with the following scenarios :- 1. i've tested Upgrade Assistant in a V3R2 model 300 machine at my workplace, and it's running fine, with spool file of the Upgrade Assistant generated. 2. However, my team mate at remote site was unable...

Upgrading an AS/400 system processor

Can I upgrade my system to an 97H7825 systemprocessor without the unit asking for a hardware pass code.?