• How to do recovery data on Tape?

    Today, when we run the EOD process, the 'Tape before' we used is full, and when we tried to inztap the new tape, there is an error msg: can't allocate Tap01, so we can't do the inztap and we decide to used the 'Tape after'. And when we do the dsptap, we can't find the 'data after'. Is that possible...

    a5aoo5 pointsBadges:
  • CPP6308 after backup completes normally.

    BRMS, after an initialize or a backup, is requesting that the tape be moved back to its slot in the library while the tape is still in a loaded state. This is causing a third party tape library to place the drive into a FAILed state, as the MOVE command should not be issued until the tape is...

    rmanderson5 pointsBadges:
  • MONSWABRM

    we are using MONSWABRM for each control groups(for every backup),can any one let me know working of this job and how it is useful Regards S.Manjunath

    Accenture130 pointsBadges:
  • Issues with BRMS Network Group

    When you go to BRMS Menu --> Policy Administration --> System Policy --> Change Network Group, you can see all the Boxes connected each other. There are 13 LPARS in total But two of these Lpars cannot see them against each other. It shows Network Status INACTIVE while the others shows...

    Maartenss5 pointsBadges:
  • Backup And Restore

    I'm trying to find the fastest way to backup a library amongst others and restore it to a new library in order to make it available for inquiry mode while the production library is available for Monthend processing. Currently the process is to do a backup of a few libraries (approx.2.5 hrs) and...

    IT40010 pointsBadges:
  • Import AS/400 files into SQL server

    Hi I would like to know how to create a job to transfer all the files (data) from AS/400 to SQL server 2005 (keep as backup)

    Yenyen5 pointsBadges:
  • AS/400 Hard Drive Copying

    To anyone's knowledge, can an AS/400 68-pin SCSI 1GB hard drive be copied or "cloned" such that the new drive will boot up exactly the way the original did (i.e., like "Ghosting" a PC drive)? Is there any other way to deal with a drive that is experiencing random seek errors that prevent an AS/400...

    Kidgrok5 pointsBadges:
  • Commands for system backup

    How can get the entire data backup of as400 server?

    Afzal8350 pointsBadges:
  • MIMIX is not replicating

    Hi Guys, Can any one tell me MIMIX Is not Replicating Properly. Its Replicating 1 sec for 30 min any one help me how to Resolve this... KC...

    5459130 pointsBadges:
  • Issues with BRMS Network Group

    When you go to BRMS Menu --> Policy Administration --> System Policy --> Change Network Group, you can see all the Boxes connected each other. There are 5 LPARS in total. It shows Network Status INACTIVE on one while the others shows ACTIVE. and receive media info is set to none What steps...

    Sjw915 pointsBadges:
  • AS 400 LIC Backup

    We have a 1986 model AS400 that is about to crash. IBM offers no support and we need steps to the License Internal Code back up. If anyone can point me in the right direction I would greatly appreciate it!

    Kb015 pointsBadges:
  • How to access AS400 during restricted state?

    After I've browsed internet, I almost felt it is only me, who's looking for answer to this. As I have one partition with only 2G memory and 0,1CPU saving 4T, I don't want to let it down for 11 hours - well, it is just backup system, so even if down, it causes no harm. But still...I would like to...

    Champs60 pointsBadges:
  • QZDASOINIT job?

    Hi , am recieving the following error messages Message . . . . : Error occurred while calling program or procedure *LIBL/NBCUNQSN (C G D F). caused by the QZDASOINIT job. I presume this is a ODBC job that runs in QSERVER, any ideas as to what has to be done. The backup is running currently and this...

    harisudhan211,005 pointsBadges:
  • After SAVIFS – how to check what was saved/cleaned up?

    When savifs complete a cleanup runs, does anyone know what the step are and how to check what is being saved/cleaned up??

    Momentum5 pointsBadges:
  • Delete Expired SAVF

    Using BRMS for backup on AS/400, the savf will be generated in the brms system library (q* in qbrms and can show by WRKSAVFBRM). I would like to know how the expired savf be deleted if no backup job with same control group execute SAVSAVFBRM? Moreover, will those not successfully saved to tape...

    Magkids10 pointsBadges:
  • AS/400 CL Auto Reply to “Load Next Tape messages”

    Would like to auto reply to this message without amending the system reply list entries, rather just from within the Backup CLP itself.

    Techman965 pointsBadges:
  • Installing old tape 7208 and new Iseries HW

    How can I install a 7208 to a 9407 M15 ?? or how can I read 8mm 7 GB tapes with a 9407-M15 ??

    Cramirez685 pointsBadges:
  • Backup Schedule File on AS400

    Do any of you know the name of the file that contains the backup schedule data. If you run Go Backup, Select Option 10. Set up backup, Select option 20. Change Backup Schedule a user can put in the schedule to run backups. Does anyone know what file and in what library this file resides that holds...

    Bkr0963c0 pointsBadges:
  • Incremental backup on iSeries.

    We save scanned images on our iSeries 720. These images can't be changed and are added to daily. We currently do a full back up daily of the folder that stores these images. To shorten our back up window can we do a back up of only the new items that have been added each day?

    Dpclifford0 pointsBadges:
  • Transporting an AS400

    I want to transport my AS400 off site for a backup solution. Does anyone know of a command to disable the hard disk reading arms so the disk does not get damaged in transport?

    Breinhart45 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following