http://itknowledgeexchange.techtarget.com/itanswers Sat, 25 May 2013 23:18:21 +0000 en-US hourly 1 http://itknowledgeexchange.techtarget.com/itanswers/modem-speed/ http://itknowledgeexchange.techtarget.com/itanswers/modem-speed/#comments Tue, 24 Jan 2012 00:29:47 +0000 I have a new modem Q100z. It is suppose to be faster than the Actiontec M1000 that I have been using. The Q100z doesn’t seem to be any faster at all. Please advise. Thank You.

]]> http://itknowledgeexchange.techtarget.com/itanswers/modem-speed/feed/ 4 http://itknowledgeexchange.techtarget.com/itanswers/configuring-vlans-with-actiontec-m1000/ http://itknowledgeexchange.techtarget.com/itanswers/configuring-vlans-with-actiontec-m1000/#comments Thu, 13 Aug 2009 15:18:44 +0000 Krused1 I am attempting to configure two VLANs with a NetGear FS726T switch without success. What I am trying to do is to have one VLAN which would be used by the staff to access to anything on the network and a second VLAN for guests to use to access only the Internet. In a reply to a previous post I was told that I also need a router to accomplish this.

We have an ActionTec M1000 modem connected to our DSL line for our Internet connection. Upon looking up the specs for this device, I see that it is described as a “modular DSL router”. So, my question is: can this device do what is required for me to establish the two VLANs that I described? If so, what changes are required to its configuration, if any?

The link to the specs of the modem is: http://www.actiontec.com/products/datasheets/M1000%20Modular%20DSL%20Router%20Datasheet%2013-1s.pdf

Finally, if this device isn’t sufficient and I need to purchase a router, what specifications do I look for to support the VLANs I want to put into place? Is there a NetGear router that you would recommend for this purpose? Thank you very much for your help!!

]]> http://itknowledgeexchange.techtarget.com/itanswers/configuring-vlans-with-actiontec-m1000/feed/ 0