Hello I want to take a back-up from our VNX (NAS). I start a test back-up and I found a problem. There are files who have only read permissions for the owner not for others. The solution is ACL’s i think. Do some of you have experience with VNX ACL’s
Hi Dear Team members, i’m currently working as an IT and system administrator i have implement a windows 2003 server just for file and DHCP, i’m using a Linksys as my gateway, and 6 other Linksys router that i’m using as APs, i trying to set ACL on my gateway router but just when i [...]
Having trouble getting traffic through my test config of 5510. Using ASDM, any to any ACL, no NAT, 2 client subnets, 1 DMZ and remaining port for outside. Seem to get different results for ports, some one way traffic, some full duplex, others none at all. Whats going on? Either traffic is port specific or [...]
hey, I want to create standard acl to allow all network to flow from 172.16.10.0 0.0.0.255 to 172.16.20.0 0.0.0.255 and 172.16.30.0 0.0.0.255 but i don’t want network to flow from 172.16.20.0 0.0.0.255 to 172.16.30.0 0.0.0.255 and vice versa, so I created the following acl, access-list standard 10 permit 172.16.10.0 0.0.0.255 access-list standard 10 deny any. [...]
How can we create ACLs on the network to block out users from attempting to connect to HR file shares?
What is an ACL and how can I use one to block traffic from our internal LAN to a remote subnet?
Hi, I’m looking for a VBScript that will search and display complete path of an exchange Public Folder (either using Outlook or other tools) and then export ACL (all members with their permissions”. For first part, since Outlook search is very slow, it would be nice if the script can do a better job. Thanks, Saura
How do I create an ACL for: Allow inbound HTTP requests to the www.yzcorp server. Add info: The www.yzcorp.com website at 10.0.1.2 is registered with the public DNS system at IP address 209.165.200.246 permit tcp any 209.165.200.246 eq www is not working.
Currently we have the DMZ ACL in the ASA firewall. One interface that was assigned as DMZ was connected to the core switch and within a VLAN. The server that was untagged to this DMZ VLAN will have the DMZ ACL applied to the inbound/outbound traffic. This was quite simple setup. This issue now I [...]
We have 14 CISCO AIR AP 1242 APs around campus. We would like to do : Have a ACL with MAC address allow from our database or XLS sheet and deny others. I already create all the wireless devices MAC address in xls sheet in place. We are trying to do is: Setup ACL for [...]
Is there a way I can control who sends information to a distribution list? For example, if I have a company-wide DL and I don’t want to use ACLs?
Last week we had a strage issue, ACL name has been disappered for 200 users in the same server, there is no changes in ACL logs, ADMIN4 and in logs. Then we have fix the issue to using the powetools. But we are investigating the cause. Can someone please advise.. Note : Admin4.nsf has been [...]
Im trying to create an acl to permit and deny certain hosts to access certain services. below is the criteria, but for some reason my ACL doesnt accomplish the requirement. Would you help please?? allow tw-dsl host web access to the Intranet server allow tw-cable host access to the Intranet server allow only inbound ping [...]
I have problem to understanding how to configure ACL in firewall and cisco router,,so pleas what is the best way to understand ACL and firewall configuration??
Hey guys! I was hoping to find a default access control list template that you may use to block off, reserved addresses, known worms, viruses, vulnerabilities when you are setting up a new router? Trying to think of every possible threat is impossible but a good recommended starting point for securing down a router that [...]
I’m having a problem figuring out how to configure the following: Allow hosts on the 192.168.30.0/24 network web access to any destination Allow hosts on the 192.168.30.0/24 network ICMP access to any destination. Explicitly deny any other access origination from the network. Now the they say implement the ACL number 101 which makes this an [...]
ERROR IN LN when clicking tools PREFERENCES — DUPLICATE PUBLIC NAME ACL MANAGER
We are actualy in a big migration project. and we want to migrate are multiple single file systems to a EMC Celera NAS. Are problèmes is that we use ACL on are SUN FS. and when we copy the file using Rsynck (i’m a SAN architect I don’t know a clue of unix systems and [...]
I am wanting to enable QoS on my cisco 3620 router for my VoiP traffic. I believe this can be done using ACL’s instead of SDM. Does anyone have any info?.
What is the difference in access levels between administrators and owners of a group? I would also like to know that who has higher access? Thanks in Advance,





