• Cisco Wireless 1200 series access point

    Hello all, does anyone know how to change the DHCP range that a Cisco 1200 series Access point gives out, the IP for the AP is 10.20.x.x, and it give out IP's in the 192.168.x.x range, does anyone know how I can get it to change to the 10.20.x.x range as this is the range that I want the computers...

    CGarcia26C1,025 pointsBadges:
  • Can I use a Linksys print server as a bridge or access point?

    Can I use a Linksys print server as a bridge or access point?  I want to use it to connect a VoIP phone.

    4jbshere5 pointsBadges:
  • Cisco Access Point: Wireless client is disconnected

    We have 21 Access Point in field in our company location. all are working and having the Good configuration along with channels and security authentication. But now a days we are facing problem with 3 access points where wireless client in one VLAN is not associating  and there is no problem in...

    Ekansh400 pointsBadges:
  • Configuring Cisco Wireless Router

    Greetings, I have a Cisco 871 wireless router and am having problems configuring it to act as a Wireless Access Point for my small internal network using Microsoft Small Business Server 2003. I am trying to set up one client access via wireless. Using Cisco’s SDM Express, when trying to change...

    RP@ADF15 pointsBadges:
  • Multiple subnets on one physical network

    I am setting up a fairly large wireless network. We have a fibre connection to the internet for a small community wireless project to give high speed to the 10-20 houses in the area. The router device is a windows PC running with two NIC cards, it is hardened down to very minimal services, with...

    Johnshoff60 pointsBadges:
  • Wireless network set up best practices

    Our open office space is specifically 75M long & 21M wide with 2 Access Points.  Kindly note we have raised floors made of formica(height from raised floor to ceiling=8.3M) and Partitioned offices with boards made of fiber. Is it proper to install 2 APs(Linksys) with a distance of 7M...

    Wilsona5 pointsBadges:
  • Access Point

    I have 2 routers, how can i do an access point?

    Mpineda5 pointsBadges:
  • Access point running off router that is running off primar dsl modem/router

    I have an access point running off router that is running off primar dsl modem/router. the access point provides wifi to guests on a different subnet. will the people logged into the acesspoints ip be registered on the primary router ? or will the acess points ip be logged ?

    Edandonna15 pointsBadges:
  • How to setup dual homing for a domain and rdc separately?

    How do you setup a dual homing pc with windows 7 pro?  we need to connect to a domain and have a rdc through a seperate connection and firewall.  Thanks

    Thepcsurgeon5 pointsBadges:
  • Our IP address is being blocked because of a network scanner

    Hello We run a small business with about 20 clients on a lan and wlan architecture. We dont have a centralized management. We have about 10 engineers who are connected to a VPN. They are using a remote application located on a University Server. Today, I received a phone call from their IT manager....

    Metraon5 pointsBadges:
  • SonicWALL Sonicpoint-N 11A/B/G Dual-Band bundled with Poe injector

    what brand is comparable to this exact model or hopefully much better

    Srigoroso35 pointsBadges:
  • Access Point configuration with Cisco 1240

    how to configure two access point 1240 cisco with each other ?

    Rafatema10 pointsBadges:
  • Wireless router

    I am using photon router used as a dhcp and acces point in .5 km range. some time internet speed is very slow. how to increase the internet sppeed. plz give me a right answer .

    Jlkjlds220 pointsBadges:
  • getting VLAN working between netgear switch fs726t and WG102 AP

    Hi everyone, Im setting this up for a church and well stright to the point..... I am trying to set up 2 SSID's on the AP both on diffrent VLANS I have a cisco 1700 router connected to the switch(FS726T) and have VLANs configured already on both the router and switch. (They work) On the switch I...

    Davidbrown0020 pointsBadges:
  • cisco access point

    Dear all, network scenario: we have 3 core switches.STP root bridge for vlan 80 and vlan 61 is core 3 switch problem: when traceroute from vlan 50 to vlan 80 I can traceroute to vlan 80 clients but not for vlan 80 default gateway. for vlan 80 default gateway is core 1 192.168.21.252, core2 is...

    Ekansh400 pointsBadges:
  • Problems witih Cisco AP Aironet 1231AG

    hello! i have done something very stupid...I erased cisco IOS image and now when i connect via com port and set up the ip address, netmask and default router, i still cannot connect to the AP i can't even ping the AP, and in order to upload other image i must be connected to it via tftp but every...

    Air1231AG5 pointsBadges:
  • wireless roaming howto

    I have 3 routers (2 trendnet, dlink) one of trendnet (192.168.100) is connected to my proxy server and i want the other 2 acts as access point and do roaming. I did a setup using same ssid, differents channels but i can't ping to 192.168.10.100 (proxy connected ). What else should i do? Thanks in...

    Tics5 pointsBadges:
  • Connect Wireless G ADSL2+ router with Access Point

    i have a d-link wireless g adsl2+router dsl-2640u connect direct to phone line with : ssid=blink ip= 192.168.1.1 wep=0022b0c2cd61 so, i dont have the user name and password for administrator to logon and change the wep code. but,when i connect to access point, the wep of access point didnt take the...

    Army125 pointsBadges:
  • Cisco WCS Perfomance Profile question

    In Cisco WCS, when you click CONFIGURE- ACCESS POINTS and on a particular ACCESS POINT you clck on Perfomance Profile we are shown with a bunch of parameters like Max Clients, Min Failed Clients (#), Coverage Level (dB) and Min failed Clients (%) and a few others. But just can't seem to find in the...

    mystergag30 pointsBadges:
  • How do you update cisco access point 1200?

    how you update cisco access point 1200 ?

    Rossy145 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following