Comments on: T1 cabling http://itknowledgeexchange.techtarget.com/itanswers/t1-cabling/ Tue, 18 Jun 2013 06:50:50 +0000 hourly 1 By: tracybs http://itknowledgeexchange.techtarget.com/itanswers/t1-cabling/#comment-48607 tracybs Fri, 16 Jun 2006 09:26:26 +0000 #comment-48607 You can’t ‘share’ a T1 between two devices. Your only choice is to purchase a second T1 connection or use a warm-spare setup (second router configured and powered on, when failure occures move T1 over to second router).

Another option is to use a multiplexer and logically split the T1 into two 512K links, each going to different router.

This entails having one link use timeslots 1-12 of the T1 and the other using 13-24.

The multiplexer is the key. The single T1 will go into this device, it will logically split the T1, and push two serial connections out to the routers. I’ve set up many of these in the past.

]]> By: blessen http://itknowledgeexchange.techtarget.com/itanswers/t1-cabling/#comment-48608 blessen Thu, 15 Jun 2006 16:37:34 +0000 #comment-48608 Check if your routers support failover

Or you can create a static route on each computer that points to the other router but with a higher weight so that it does not use that unless the other is down.

]]> By: edwardzeng http://itknowledgeexchange.techtarget.com/itanswers/t1-cabling/#comment-48609 edwardzeng Wed, 26 Apr 2006 23:16:20 +0000 #comment-48609 Check this website. there are detail of T1 Cable.

Cheers,

]]>