http://itknowledgeexchange.techtarget.com/itanswers/server-2003-network-2-nics/ Mon, 20 May 2013 13:53:06 +0000 hourly 1 http://itknowledgeexchange.techtarget.com/itanswers/server-2003-network-2-nics/#comment-52992 rbittel Wed, 30 Apr 2008 23:50:53 +0000 #comment-52992 Yes, you need to route traffic from the internal NIC to the external NIC. At a command prompt type in “Route’ for more info.. I’m not sure of the exact command syntax.

]]> http://itknowledgeexchange.techtarget.com/itanswers/server-2003-network-2-nics/#comment-51916 jlees Wed, 27 Feb 2008 06:40:01 +0000 #comment-51916 Buddy is correct after you enable routing or internet connection sharing on your windows server. (Routing and Remote Access will do the same thing.)

]]> http://itknowledgeexchange.techtarget.com/itanswers/server-2003-network-2-nics/#comment-51740 buddyfarr Thu, 21 Feb 2008 17:25:07 +0000 #comment-51740 I do believe that you need to change the gateway for the workstations’ NICs in DHCP to the IP address of the internal NIC, not the comcast router. once they get directed to the internal NIC then the internal NIC will pass it onto the external NIC and then onto the comcast router.

]]>