We will assume these are Cisco routers, as you did not specify this in your question.
what you need to do is
Use the default-originate command to propogate the default route.
Create the static default route on router 2
Configure a static route on router 1 for the R2 network
Use the passive-interface command to stop the RIP updates on the LANs
That should be more than enough information for you to complete the job. If you work out the rest for yourself, then you will learn something, if you were just given the configuration (which would be difficult seeing as you have left out a lot of the IP information) then you just copy it and learn nothing. The idea of the course you are on is to learn, not to just ask someone else for the answer.