…the above link is not working ?

Try Configuring OS/400 SMTP, and also check out TCP/IP Fastpath Setup.

Tom

Hi Tom,
Thanks for all the information. Unfortunately, I am unable to find any diagnostic message on both source and target systems. I am encountering this problem only when I use USER A. If I use USER B or USER C as remote user, the command executes successfully. Is the user profile need any special authority to execute RUNRMTCMD? The difference between USER A and USER B is the user call. User A is *USER class and USER B is *PGMR class.

The one that I have downloaded had the AS400 IP address by default,…

I don’t know what that means.

You can’t use a Mochasoft “default” address to access your AS/400. You have to supply an address.

Can you successfully telnet to your AS/400 from the Windows 7 command line?

Tom

I would normally expect this to be related to authority. The message should be referring to the RUNRMTCMD itself, i.e., it didn’t run correctly. If something like RMTLOCNAME() was wrong, a different message should show. If the remote command was sent, but it couldn’t run, then again the message should be different.

When RUNRMTCMD runs over *SNA, there will be a QSYSPRT spooled file in the job that sends the command. The result of the command that ran on the remote system will be in the spooled file.

If no spooled file is available, i.e., nothing was written to it, then the remote command didn’t run. (Technically, I suppose that there could be SNA configuration problems that blocked the return of data for the spooled file. I’m not sure what those might be.)

There should be diagnostic message in the joblog just before the CPF91CC. That should indicate the actual problem.

Tom

Hi Charlie,
Thanks for the information. Unfortunately I couldn’t see any low level messages on Target System relating to my command RUNRMTCMD. Is thre any other suggestion?

You might be interested in a series of articles I wrote about a year ago for MC Press. The last one, found here provides a search function across the message text of retrieved messages. Earlier articles (linked to by the article referenced above) demonstrate retrieving messages, changing messages, etc.

Bruce Vining

250 Rename successful.

Here is the short of it.
mget 20120405*.csv
read the log file, grab the filenames that were downloaded.
rebuild a script file to reconnect to their server and rename each file downloaded.
Kick off the mapping programs.

thanks everyone.

There are several advantages for using fiber optics instead copper cabling. Longer distances, higher bandwidth, you don’t have to pull out cables to use new technology it is enough that you change the equipment and connectors at the ends, security issue (there is no emission so it can not be tapped without action on the fiber core, what can be detected), SiO2 is dielectric so you can use it in power plants, along the high voltage cables there is no induction, and no interference on the signal which is running through optical fibers.
But connectors, splicers, measuring equipment, transmission equipment is expensive. So think twice do you really need fiber optics, and believe me with new technologies you do.
If you are thinking about fiber networking, it is common networking knowledge, but using fiber optics instead of copper, with all necessary precautions.
Good luck!

This resolves this issue! Thank me later, only cost me 48hrs!

http://www.certcomms.co.uk/blog/servers/black-screen-at-login-windows-server-2003-corrupt-registry/

I wonder if the name you put in the connect tab matches in your network DNS.

in Lotus Notes, I need a button, when the user clicks the button, I need to open Outlook Email for the user to enter a messag and send an outlook message

Hi there ,,

As long as you use LD 8.5.3 I recommend this refernce for the implentation . Meanwhile, I am expecting an update from you on what happend after you follow the steps .

http://publib.boulder.ibm.com/infocenter/domhelp/v8r0/index.jsp?topic=%2Fcom.ibm.help.domino.admin85.doc%2FH_CREATING_SECURITY_POLICY_SETTINGS_FOR_LOTUS_INOTES_USERS_STEPS.html

Regards

If there is room in your budget, check out MailTool from B V Stone. We have used it for a long time with good results. It has a lot of features and can save you a lot of time.

Price is reasonable.

Hi there,,

The most important question to be asked over here is ,,
I wonder if you know whither you have an SMTP server or at least the SMTP is configured on one of your Lotus Domino servers …
http://publib.boulder.ibm.com/infocenter/domhelp/v8r0/index.jsp?topic=%2Fcom.ibm.help.domino.admin85.doc%2FH_SETTING_UP_A_RELAY_HOST_OR_FIREWALL_STEPS.html

hi there,

I also need some more details …
Are you the one who created them ? and do you get this message after trying to modifying them ? or what

Thanks a lot

“…I keep losing my posts and I can’t find them”

That’s because homework questions are not allowed here, thus most of the times they are deleted.

How do I create a report from daily backup?

Thanks for all the suggestions!

select table_name from INFORMATION_SCHEMA.columns where column_name=’Your_column_namel’

Here is the data:
H…
M1…
M2…
M3…
M4…
N1…
N2…
N3…
N4…
M1…
M2…
:
T…
H…
M1…
:
T…

I copy the H to the new file, then the N* records, then the T, then the H, etc. They must all stay in the same order as they are in the file. While I can use SQL to update the N to an M, I can keep the records in the order that they are in in the input file and change the RECTYP in 1 program.