Questions & Answers

  • Purchase Order output message disappears when saving via ME21n or ME58

    We are running on a ECC6 environment. We have an output message type ZNER to auto purpose using Key Combination (Doc type / Purch Org / Company Code / Puch Group) When creating the PO and reviewing the messages, this ZNER exist. But, once you save the PO, this message type is no longer there. For...

    FarrowR10 pointsBadges:
  • One DHCP server for two VLANS with different subnets

    Hi all,How do I configure a same DHCP for two different VLANs. My setup is say VLAN 10 is having DHCP server with IP 10.102.1.2 VLAN 10 with subnet 10.102.1.1/16 VLAN 170 with subnet 192.168.10.1/22 VLAN 10 clients are getting DHCP, then what I have to configure in layer advanced switch to do get...

    31032920 pointsBadges:
  • Windows doesn’t obtain IP address automatically via DHCP

    I have Windows XP with SP3. It doesn't obtain IP address automatically via DHCP. I need to configure it manually. Please help.

    Xaphar220 pointsBadges:
  • How to confgure VLAN with DHCP?

    I need to configure VLAN for blade center. I need the VLAN to give IP to all the nodes on the blade center. What are the commands to configure the VLAN with DHCP for the blade?

    DHCPVLAN5 pointsBadges:
  • configure DHCP over VLAN’s windows server 2003

    My question is how to configure DHCP over VLAN's. At present in my company DHCP is running without any VLAN's setup but know as our network extend and also for the security reasons i want to implement VLAN's in the switch. Then what about my DHCP how it works, what is the configuration requirement...

    ITKE346,470 pointsBadges:
  • Roxio Easy CD&DVD Burning 14.0.49.2; 5.0.0.0

    I try to open files to load and burn to a DVD. The files are .MTS (multiple files) the message I get is "Media File is Not Editable" funny as I am not trying to edit anything just trying to load and burn these .MTS files to a DVD.I hope Roxio is supported to open .mts files but I would think I...

    zehowski5 pointsBadges:
  • How does DHCP service start?

    I have Windows XP with SP3. When I check the service DHCP. It is automatic but stopped. When I start the service. It doesn't. It shows error. "Could not start the DHCP Client service on Local Computer. Error 1068: The Dependency service or group failed to start." Please help.

    Xaphar220 pointsBadges:
  • How can I create a virtual network interface in Microsoft Windows?

    Now I know on Linux that it's possible to create a TUN interface (using a TUN driver) that can provide almost a "network interface psuedo-device" that's treated as a regular network interface. Can I do this programatically in Microsoft Windows? Can I do it without writing my own driver?

    ITKE346,470 pointsBadges:
  • Cisco POE switch port flaps

    I have a Cisco PoE switch flapping 3 of my 12 ports providing power to connected 3com hubs. The configuration is the same for all switch ports and is set at defaults. debugging poe events outputs the following which seems to indicate the switch is probing for an IP phone.

    Peterp270 pointsBadges:
  • The difference between GLC-SX-MM and GLC-SX-MMD

    The two modules seem to be similar,  What's the mean about "D", What's the  difference between GLC-SX-MM and GLC-SX-MMD?

    flowerlee85 pointsBadges:
  • Cisco Catalyst 3750 routing issues

    I need help configuring a simple routing scheme for a 3750, I have a visio diagram of a very simple network, let me know if anybody can help. thanks

    Daduruguay196110 pointsBadges:
  • DHCP by Windows Server 2008 between VLANS

    Hi, I'd like to know how to configure DHCP info to be passed through multiple VLANS to issue addresses to respective clients in all subnets. Right now I am thinking I need to have all proper scopes defined on the dhcp and i would also put the server (which is the AD) in the management VLAN which...

    OrlandoD5 pointsBadges:
  • Website transfer between HTTP vs HTTPS

    Most websites that use HTTPS start out with pages that are HTTP. Then if there is a transaction, transfer to HTTPS, then back to HTTP after transaction complete.  What happens if the website does not take the user back to HTTP? Thanks.

    gjwray15 pointsBadges:
  • Developing mobile applications using Lotus Notes

    How can we develop a mobile application using lotus notes. what are limitations; and do we have the mobile version of domino designer applications. Provide the related url to refer.

    shivasanjay2,510 pointsBadges:
  • Cannot reopen an .mht file.

    Hi, On our network I can open a .mht file using a hyperlink (which is in another .mht file.). But if I try to reopen the file it doesn t work anymore? IE10 keeps on trying to open the page, but no result.

    RoelandHartmans5 pointsBadges:
  • How to create forms with RLU

    I am recreating a program that has uses RLU, have no instructions or procedures on how to create the form... any ideas of where i can find such instructions?

    edewing20 pointsBadges:
  • Is there a way to use multiple storages with localStorage?

    Does anyone if it's possible to have the same name used can have different values stored separately and to be shown in a list? Here's my example: function save() { var inputfield = document.getElementById('field').innerHTML; localStorage['justified'] = inputfield; } So basically when a person...

    ITKE346,470 pointsBadges:
  • What’s a great packet sniffer for capturing loopback traffic?

    When my company is testing our Windows service / server controller GUI combinations, we usually do it by running both pieces on our development box. Inside of this setup, the remote traffic between the two are through loopback, not an Ethernet card. Does anyone know of a great Windows packet...

    ITKE346,470 pointsBadges:
  • Can I spoof the original IP address of an HTTP request?

    I currently have a load testing tool that's written in Python to basically blast HTTP requests at the URL. Now, I need to run different performance tests against an IP-based load balancer, so the different requests will come from a range of IP's. I know a ton of companies offer commercial tools to...

    ITKE346,470 pointsBadges:
  • AS400-CL- Library List

    I want to remove all the libraries from my library list and want to add new set of libraries in my library list. I dont know what are all libraries exactly available in my library list. I want to achieve this programatically. How to achieve this.

    rajeshece1,215 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following