Have a 2651 Cisco router with a 4wire T1 WIC card. It has a 768k Frame ckt riding it. When T1 is taking hits or even when it isn't the show service-module never increments stats. It is always (last 0 15 minute intervals) when it should be going up to 96 15 min intervals. Can't find any info on why this is not showing up.

This is my 'show service-module' output: (T1 is currently failed)

Interface Serial0/1 Module type is T1/fractional     Hardware revision is 0.152, Software revision is 20050811-0.3,     Image checksum is 0x80ACD1B3, Protocol revision is 0.1 Transmitter is sending remote alarm. Receiver has loss of frame, Framing is ESF, Line Code is B8ZS, Current clock source is line, Fraction has 12 timeslots (64 Kbits/sec each), Net bandwidth is 768 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 01:15:20     loss of signal        :    0,     loss of frame         :    1, current duration 01:15:11     AIS alarm             :    0,     Remote alarm          :    0,     Module access errors  :    0, [strong]Total Data (last 0 15 minute intervals):[/strong]     0 Line Code Violations, 0 Path Code Violations     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (0 seconds elapsed):     0 Line Code Violations, 0 Path Code Violations     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

 



Software/Hardware used:
Cisco 2651 router with IOS ver C2600-ADVSECURITYK9-M), Version 12.4(15)T7